Search
9 articles for “aluminium oxide Al2O3”
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Estimation of Mechanical Properties of Kevlar/Basalt Intrawoven Composite Laminates Containing Nanoparticles
Abstract: Purpose: The research describes estimation of various Mechanical properties like compression, tensile, shear and impact strength of Kevlar/Basalt (KB) Intrawoven 1×1 composite laminates, each comprising 1%, 3% and 5% of Al2O3 (Aluminium oxide) nanoparticles. Design/methodology/approach: These are woven with the help of manual handloom weaving machine, compression moulding technique was adopted for the fabrication of hybrid composite laminates. Attempts have been made to analyse the mechanical properties of Kevlar/Basalt intrawoven …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–12 Read article
-
Revealing the Effect of Swift Carbon Ion Beam on Radiation Sensitivity of Radio-frequency Magnetron Sputtered Grown Alumina Thin Films
Abstract: Regarding targeted treatment, hadron therapy is beneficial than conventional radiotherapy based on X rays/gamma rays due to characteristic energy loss profile of energetic charged particle during ion matter interaction. In this regard, dose monitoring and its precise measurement with spatial accuracy are very crucial. Thermoluminescence (TL) based thin film radiation dosimeter has the potential to serve this purpose. In hadron therapy, use of swift carbon ion beam is found to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 23–29 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
Enhancing Combustion Efficiency and Emission Reduction in Single Cylinder CI Engines: A Study on Waste Dairy Scum Methyl Ester Biodiesel Blends with Aluminium Oxide Nanoparticles
Abstract: In response to the urgent need for sustainable energy solutions and environmental considerations, this study explored the utilization of waste dairy scum methyl ester biodiesel blended with diesel and enhanced with Al2O3 nanoparticles as an additive. The biodiesel was prepared by blending waste dairy scum methyl ester with diesel and incorporating 100 ppm Al2O3 nanoparticles. Experimental tests were conducted on a single-cylinder diesel engine, comparing neat diesel, B30 biodiesel blends …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 15–28 Read article
-
Enhancing Combustion Efficiency and Emission Reduction in Single Cylinder CI Engines: A Study on Waste Dairy Scum Methyl Ester Biodiesel Blends with Aluminium Oxide Nanoparticles
Abstract: In response to the urgent need for sustainable energy solutions and environmental considerations, this study explored the utilization of waste dairy scum methyl ester biodiesel blended with diesel and enhanced with Al2O3 nanoparticles as an additive. The biodiesel was prepared by blending waste dairy scum methyl ester with diesel and incorporating 100 ppm Al2O3 nanoparticles. Experimental tests were conducted on a single-cylinder diesel engine, comparing neat diesel, B30 biodiesel blends …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 15–28 Read article
-
Characterisation of Plasma Sprayed CNT-Alumina Composite Coatings on Boiler Tube Steel
Abstract: In this research work, the 1.5, 2 and 4 wt.% CNTs-Al2O3 coatings were prepared and successfully deposited on T22 boiler tube steel using plasma spray process. Ni-Cr was also used as bond coat before applying CNTs-Al2O3 coatings. The coatings were subjected to metallography, XRD and SEM/EDAX analysis. The porosity of CNTs-Al2O3 mixed coatings on T22 boiler steel was found to be decreasing with increase in CNTs content. The CNTs were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 1–15 Read article
-
Development and Characterization of Al2O3-SiC Graphite Reinforced Al7075 Hybrid Composite
Abstract: The aim of the present investigation is to carry out a study of mechanical properties of aluminium alloy (7075) reinforced with silicon carbide, aluminium oxide and graphite. This composite is produced by the vortex method. The constituents of the composite are mixed uniformly by stirring action. Due to rotation of a mechanical agitator, hence creating vertex by stirring of molten metal, then by adding ingredients, the product was produced. Then …
Published in Trends in Machine design · Vol. 6, Issue 2, 2019 · pp. 15–21 Read article