Search
95 articles for “adhesion strength”
-
Dependence of Adhesion Strength of Plasma Spray on Coating Surface Properties
Abstract: It is well known that thermal plasma spray coatings have diversified utilizations, but not vividly in use, mainly because of high cost of spray grade powder, for development of thick coating > 50 µm on metal substrates. Present investigation aims at depositing plasma spray coating on metals using low-cost/waste materials. A mixture of fly-ash + 20 weight percent of Quartz + 20 weight percent of illmenite is used for coating …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 57–64 Read article
-
Application of Neural Network Analysis to Correlate the Properties of Plasma Spray Coating
Abstract: Thermal spray coatings are more often being demanding process at the recent stages of industrial design processes to become fundamental element of the engineering system. The aim of the present paper is to develop a model-based estimation and control for regulating the coating adhesion strength, by using neural network. This proposed model permits cost reduction by the possibility of adjusting the parameter of the process for each of the desired …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 1–10 Read article
-
Improvement of Mild Steel Surface Properties by Fly-ash + Quartz + Illmenite Composite Coating
Abstract: Plasma spray of fly-ash composite gives a stable improvement of surface properties for industrially used materials/equipments, which has become a major technological research area encompassing studies in a broad range from medical field, chemical field to ceramic field. In the present investigation, coatings are developed on mild steel substrates using fly-ash + quartz + illmenite composite (in a weight percentage ratio of 60:20:20) at various plasma torch input power levels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 125–131 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Comparative Evaluation of Shear Bond Strength of Three Different Generations of Adhesive to Dentin: An In Vitro Study
Abstract: The clinical use of resin composites has expanded considerably over the past few years due to increased esthetic demands by patients, new improved formulations, and simplification of bonding procedures. Novel resin composites benefits from improved filler technology and modifications of the organic matrix for a greater degree of polymerization .Improved marginal sealing around composites has reduced the frequency of unfavorable postoperative responses. The sealing ability of a composite restoration is …
Published in Research and Reviews: A Journal of Dentistry · Vol. 5, Issue 2, 2014 · pp. 9–17 Read article
-
Characterization of Antibacterial and Biofilm Inhibition in Tin and Zinc Oxide Nanoparticle-Doped Orthodontic Composites
Abstract: Background: This study investigated the antibacterial effectiveness of orthodontic adhesive enhanced with stannous oxide (SnO₂) nanoparticles against Lactobacillus acidophilus and Streptococcus mutans, in comparison to traditional adhesives without nanoparticle infusion. Methods: A modified orthodontic adhesive was prepared by incorporating 1% w/w of tin dioxide and zinc oxide nanoparticles (SnO₂ + ZnO₂ NPs) into Transbond XT. This nanoparticle-enhanced composite was used to fabricate discs for assessing antibacterial activity against Lactobacillus acidophilus …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 230–239 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
A Critical Analysis of Cold Spray Coatings and its Tribological Performances
Abstract: Coatings are utilized for temperature barrier, protection against corrosion and wear etc. Cold spray is a solid-state processing method that is unique among thermal deposition procedures since it deposits particles at temperatures below their melting point. This technology does not involve particle melting, hence retaining the original properties of the materials. Increased coating strength is achieved by retaining of feedstock powder microstructures and characteristics, which prevents oxide formation and other …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 220–226 Read article
-
Glass Fiber Layer Effect on Chemico-mechanical Properties of Light Cure Adhesive Systems
Abstract: Introduction: Orthodontic adhesives should have clinically acceptable shear and tensile bond strength to withstand masticatory forces and those generated by treatment mechanics. Mechanical properties of the adhesive, such as flexural modulus of elasticity, tensile strength, and compressive strength, are more heavily influenced by the resin matrix's Degree of cure (DC). Aim: The study compares the effect of the Glass fiber layer on Chemico-mechanical properties using three different light cure adhesive …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 1–9 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Comparison of Bond Strengths of Nano and Microhybrid Flowable Composites for Orthodontic Bonding: An Invitro Study
Abstract: Introduction: When the orthodontic brackets are bonded to the etched enamel, the ideal orthodontic adhesive should have optimal bond strength and be able to withstand masticatory forces as well as orthodontic forces. At the same time, when the treatment is completed, the bracket should debond without causing any damage to the enamel. There have been many recent advances in composites in general and their applications in orthodontic use is questionable. …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 1–8 Read article
-
Analysis of Physical Properties of Polyethylene Terephthalate Coated Aggregates used in Bituminous Concrete Mixes
Abstract: The main cause of climate change that the world has been facing for several years is burning of plastic waste in open air. To contribute to solution of this problem, an investigation was carried out with utilization of plastic waste in bituminous mixtures used in flexible pavement.With varied amounts of Polyethylene Terephthalate (0%, 6%, 6.5%, 7%, 7.5%, and 8%) of asphalt content, variousdesirable properties of aggregates required for bituminous mix …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 206–213 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
FLEXURAL STRENGTHENING OF PCC BEAMS WITH VARYING FIBER DENSITIES OF CARBON FIBER FABRICS
Abstract: Strengthening of concrete structures has become ineludible due to unavoidable factors such as fatigue and aggressive environmental conditions causing deterioration of concrete structures. Many researchers are turning their direction for use of various high strength and high performance concretes due to their high structural and durability properties, for the purpose of repair and strengthening of concrete structures against these aggressive conditions. One of the rehabilitation methods was used in this …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 14–20 Read article
-
Determining the Best Long-Term Luting Cement for Implant Retained Prosthesis Based on Bond Strength and Surface Integrity
Abstract: Implant-retained prostheses play a crucial role in modern dentistry, necessitating reliable luting cements to ensure their longevity and functionality. This study aimed to determine the best long-term luting cement for implant-retained prostheses based on bond strength and surface integrity. The success of implant-retained prostheses relies heavily on the quality of the luting cement used to secure the restoration to the implant abutment. The investigation will employ a series of standardized …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 119–129 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Physicochemical Transitions and Polymerization Dynamics in Multi-Generational Dentin Adhesives: A Critical Review of the Resin-Dentin Composite Interface
Abstract: Adhesive dentistry has undergone a transformative refinement over the past three decades, transitioning from technique-sensitive, multi-step etch-and-rinse protocols to streamlined universal formulations. This narrative review critically synthesizes evidence from thirty peer-reviewed investigations to evaluate the evolution of dentin bonding agents from the fourth through the eighth generations. The analysis places particular emphasis on the physicochemical dynamics of the resin-dentin interface, including interfacial bond strength metrics, marginal integrity, and microleakage behavior. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 209–228 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article