Search
26 articles for “UV-visible optical spectroscopy.”
-
Hydrothermal synthesis of ZnS for efficient photodegradation of Malachite green
Abstract: In this work, ZnS nanoparticles were prepared by hydrothermal method. Various characterization techniques such as X-ray diffraction (XRD), UV-visible optical spectroscopy and FT-IR spectra were used to study the structural, composition and optical properties of synthesized nanoparticles. The XRD pattern showed that the prepared ZnS nanoparticles have a cubic zinc blende structure. The band gap is calculated from absorption spectra with the help of Taucplot and is found to be …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 1, 2020 · pp. 11–15 Read article
-
Au@Sio2@PVP-DCMD Membranes: A Breakthrough in Heavy Metal Removal and Antibacterial Defense
Abstract: This study investigates the development and characterization of multifunctional gold-doped silica (Au@SiO₂) membranes for water distillation and antibacterial applications. The manufacturing process integrated gold nanoparticles into silica matrices using sol-gel techniques. Structural analysis was conducted using SEM (showing uniform pore distribution with an average pore size of 40-50 nm), FTIR (confirming Si-O-Si and Si-Au-Si bonding peaks at 525 cm⁻¹ and 1310 cm⁻¹ respectively), EDX (revealing gold nanoparticle content of 1.5 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 13–27 Read article
-
Synthesis, Characterization of MoS2 Nanosheets, Amorphous Carbon Nanotube (ACNT) and ACNT-MoS2 Nanohybrids: A Comparative Research Analysis
Abstract: The superior properties of graphene and its applications in several fields like sensor, electronics, etc have inspired the researchers to concentrate on other 2D material and their hybrids. Among them, MoS2 nanosheets has gain research interest due to its amazing electronic, optical and physical properties. Due to all these properties, MoS2 nanosheets are used in numerous applications such as catalysis, photo emitting diode, double layer capacitors, lithium-ion batteries, etc. Here, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 9, Issue 3, 2019 · pp. 27–36 Read article
-
Synthesis and Characterization of Sustainable, Low-Cost, Biomass-Derived Carbon Films from Hevea Brasiliensis (Rubber) Wood for Environmentally Friendly Gas Sensors with Enhanced Selectivity and Sensitivity to Polar Vapors and Hazardous Gases
Abstract: Hevea brasiliensis (rubber) wood sawdust was utilized to fabricate carbon gas sensors for detecting 1000 ppm of ethanol, methanol, acetone, carbon dioxide, and ammonia gases. The carbon particles were prepared by phosphoric acid impregnation followed by thermal activation and then fabricated into films on conductive and non-conductive substrates using the doctor blade method. X-ray diffraction (XRD) analysis revealed distinct graphitic features with peaks at the (002) and (100) planes, indicating …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 1, 2025 · pp. 22–36 Read article
-
Investigating the Effect of Annealing Temperatures on SnO2 Nano Structural Thin Films and their Properties
Abstract: As deposited and two different annealing temperatures (500°C and 600°C) of Tin dioxide (SnO2) thin films are prepared on glass substrates by Chemical Bath Deposition (CBD) technique and subsequently their structural, morphological, optical and electrical properties are investigated and analyzed as a function of annealing temperature. It’s found that SnO2 films exhibit different nanostructures at different annealing temperatures. XRD analysis confirms that both deposited and annealed films are cubic structure …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 12, Issue 1, 2022 · pp. 28–39 Read article
-
Synthesis and Characterization of Size Tuned CdS Quantum Dots
Abstract: CdS nanoparticles are synthesized using chemical precipitation at room temperature. Cadmium sulfide is one of the most promising materials for solar cells and of great interest for their practical applications in up to electronics and photonics. The optical properties get modified due to the confinement of charge carrier within the nanoparticles. The physical and chemical properties of these nanoparticles are found to be size dependent. The crystallite sizes of cadmium …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 8, Issue 1, 2018 · pp. 28–39 Read article
-
Synthesis of Silver Nanoparticles of Cissus Quandrangularis and It’s Virtual Screening Against Gastric Cancer
Abstract: Gastric cancer, also known as stomach cancer, is the third leading cause of cancer-related deaths globally and remains a major health challenge due to its poor prognosis and high mortality, largely attributed to late-stage diagnosis. In this context, plant-based nanomaterials are gaining momentum for targeted therapeutic applications. Cissus quadrangularis, a medicinal plant native to India from the Vitaceae family, is traditionally used for its diverse healing properties. Its stem, in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1551–1569 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
Preparation and characterization of High-performance ZnO/PVB Nanocomposite films for UV-shielding and Optoelectronics
Abstract: Zinc oxide nanoparticles can be incorporated into polymer matrices to create materials for various high-performance engineering applications. In this study, zinc oxide nanoparticles were reinforced at different loadings (0.5, 1.0, 0.5, 1.0, 1.5, and 2.0 wt.%) in polyvinyl butyral matrix to synthesize nanocomposite films using the solution casting method. The impact of zinc oxide nanofiller on the morphology and ultraviolet-shielding performance of polyvinyl butyral nanocomposite films was evaluated using various …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 3, 2025 · pp. 35–53 Read article
-
Structural Investigation on Synthesized Ag Doped ZnO-MWCNT and its applications
Abstract: Metal doped multiwalled carbon nanotube with metal oxide has unique properties which provide the remarkable studies in the field many applications. Zinc oxide nanoparticles (ZnO NPs) is a semiconducting material with a large excitation binding energy of 60 meV and wide energy band gap of 3.367 eV. The doping of silver naoparticle with ZnO/MWCNT composite materials offer values and makes it as advanced multifunctional materials. Silver nanoparticles are a highly …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 8, Issue 2, 2018 · pp. 49–59 Read article
-
Effect of Electrochemically Synthesized Zno/CoO Nanocomposites on Optical, Electrical and Viscosity Properties of Polyvinyl Alcohol Films
Abstract: AbstractZnO/CoO nanocomposites doped poly vinyl alcohol films were prepared by casting method using water as a solvent. X-ray diffraction, IR spectroscopy UV-visible spectroscopy, and scanning electron microscopy techniques were used to characterize the synthesized nanocomposite films. Study of the structural changes and complexation of nanoparticles with polymer matrix were performed using X-ray and IR techniques. Optical characterization studies revealed a blue shift in the absorption edge with increasing nanoparticle concentration …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 52–62 Read article
-
Synthesis and Applications of Copper- Doped Pyridine Precipitate
Abstract: A metal organic nonlinear optical single crystal, copper doped pyridine material, was created at room temperature using the slow evaporation solution growth technique (SEST). The developed material's crystalline nature was revealed by a powder X-ray diffraction (XRD) analysis. Single crystal XRD study shows that the material synthesized possesses monoclinic system of cell parameters, a = 11.44 Å, b = 7.92 Å, C = 11.74 Å and alpha and gamma is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 51–60 Read article
-
Fabrication of MOF5 -GO nanocomposites by tailoring graphene oxide
Abstract: The present paper focusses on the synthesis of graphene oxide and its nanocomposite with metal organic framework (MOF-5). Graphene oxide (GO) was prepared using modified hummer’s method with different concentrations of oxidizing agent to vary the presence of functional group on the surface of GO. The presence of functional group plays a crucial role in determining the interactions between GO and MOFs. To confirm the presence of different functional groups …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 101–114 Read article
-
Physical and Optical Properties of Gum Arabic Sugar doped
Abstract: In this paper a different amount of sugar (0.1, 0.2, 0.3grams) were added to four types of Gum Arabic, namely (hashab, talha, cacamot and neem), then carefully, thoughtfully and thoroughly their physical properties were studied using Ultraviolet-Visible Spectroscopy (UV-Vis) and Fourier Transformation Infrared Spectroscopy (FTIR) devices; referring to the experimental implications, it had been observed and monitored that, the value of energy gap was increasing accordingly, to doping affectedness, and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 38–50 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Properties of ZnO Thin Film deposited on Flexible Substrate using RF Sputtering
Abstract: Semiconductor materials demand is increased in recent years, due to new emerging technologies. There is need to find the alternate for silicon in electronics industry, as silicon is brittle in nature and has low efficiency, which makes it unsuitable for transparent and flexible device. Zinc oxide (ZnO) is emerging as popular choice of researchers due to its wide range of properties, abundancy and non-toxicity. This work explores the properties of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 50–56 Read article
-
Doping of Metal Precursors on Cadmium Selenide Quantum dots—A Review
Abstract: In this article, we review effects of doping on Cadmium-Selenide (CdSe) Quantum dots (QDs). Different dopants critically influence the properties and functionalities of nanocrystals (QDs). It is of strong interest to understand the structural characteristics of dopants and how they interact with the QDs. Differently, doped CdSe QDs were characterized by X-ray diffraction (XRD) technique, UV-Visible absorption spectroscopy, photoluminescence (PL) spectroscopy. The important results and measurements are discussed. CdSe quantum …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 7, Issue 3, 2017 · pp. 1–4 Read article
-
Biosynthesis, Characterization and Antibacterial Studies of Silver Nanoparticles from Tamil Nadu Major Crop Anacardium occidentale
Abstract: Recent studies have shown that Silver Nanoparticles have physical, optical and catalytic properties. Present work involves the eco-friendly and reproducible synthesis of Silver Nanoparticles from the Anacardium occidentale leaves extract. The synthesized silver Nanoparticle from 1 mM AgNO3 solution through the leaf extract were characterizing was monitored using Ultraviolet-visible (UV-vis) spectrophotometer, Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), X-ray powder diffraction (XRD) and Fourier transform infra-red spectroscopy (FT-IR).Scanning …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 20, Issue 3, 2018 · pp. 13–22 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article
-
Exploring the Dual Functionality of Polypyrrole/Cobalt Sulphide Nanocomposite in Photocatalysis and Gas Sensing
Abstract: Cobalt sulphide nanomaterial was synthesized using the co-precipitation method, and chemical polymerization of polypyrrole (ppy) was performed in the presence of the synthesized cobalt sulphide nanomaterial for the preparation of nanocomposite. The synthesized ppy/cobalt sulphide nanocomposite was characterized by transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray powder diffraction (XRD), Fourier transformation infrared spectroscopy, and UV-visible spectroscopy. The TEM micrograph revealed that the generated cobalt sulphide nanoparticles were …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 72–85 Read article