Search
67 articles for “Titanium”
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Automated Microstructure Classification with Class-Specific Segmentation for Titanium Based Composite Materials
Abstract: In engineering, characterisation of microstructure is required to determine and forecast behaviour of titanium alloys. Our proposal in this work has been a deep-learning-based framework in the automatic classification and segmentation of Titanium Based Composite Material. The framework then uses EfficientNetB0 backbone, where we have chosen the backbone to scale the performance of classification and the computational efficiency with the assistance of the transfer learning and the compound scaling. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 424–433 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Enhancements in Titanium Matrix Composites: A Multifaceted Exploration of Various Structural Ceramics Reinforcement
Abstract: This research study delves into the comprehensive exploration of Titanium Matrix Composites (TMCs) reinforced with Silicon Carbide (SiC), Alumina (Al2O3), and Boron Nitride (BN). The investigation is structured into three key phases, each addressing essential aspects of TMCs: Phase 1 involves materials and manufacturing, where TMC coupons were fabricated through the stir casting technique with varying compositions of aluminum and silicon carbide. Phase 2 focuses on characterization and defect detection, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 83–94 Read article
-
Analyzing the Performance and the Emission Characteristics of Palladium Catalyst using different blends of Methanol Fuel and Nano Particles of Aluminium and Titanium Oxides
Abstract: The high cost and limited availability of precious metals prompted the automotive industry to explore alternative materials for improving catalytic converter performance. This research focuses on the development and optimization of catalytic converters designed to reduce exhaust emissions, ensuring compliance with market needs and regulatory standards. Specifically, it investigates the three-way catalytic converter in a four-stroke engine utilizing commonly available noble metals, particularly palladium as the catalyst. The best way …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1505–1517 Read article
-
A Comprehensive Review of Green Hybrid Polymer–Inorganic Composite Systems Incorporating Palm Tree Ash and Titanium Dioxide
Abstract: The increasing requests on sustainable and high performance systems have motivated extensive investigations on polymer-based hybrid systems with bio-derived and/or functional inorganic fillers. In this review, the importance of palm tree ash (PTA) and titanium dioxide (TiO₂) as synergistic fillers for polymer–inorganic hybrid composites, particularly about structure–property relations, interfacial adhesion and durability performance, is discussed. Agricultural waste-derived palm tree ash (PTA) plays as a silica-rich filler which not only aids …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1811–1820 Read article
-
TiO2 Refined Flux Provides Significant Impact on Saw Bead Shape, Particle Size, and Hardness
Abstract: This experiment is very interested in how adding titanium dioxide powder to submerged arc welding on low alloy steel plates affects the bead geometry, grain size, and hardness. The commercial fluxes were combined with powdered titanium dioxide at varying concentrations (2.5%, 5%, 7.5%, 10%, and 12.5%). No changes were made to the welding process parameters despite the variety of welding situations. It has been shown that the inclusion of titanium …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 70–80 Read article
-
Enhancing Cooling Efficiency in Dual Nozzle CO2-Based Vortex Tube Systems for Machining Titanium Alloys: Implications for Polymer and Composite Processing
Abstract: In machining of Titanium alloys, the cutting temperature plays a vital role that directly influences the performance and it is required to maintain as low as possible. In this study, a dual nozzle Vortex Tube Cooling System (VTCS) that supplies cool compressed CO2 gas is developed to reduce the cutting temperature in Ti-6Al-4V machining. The experiments were conducted at constant cutting and flow parameters during turning at different levels of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 284–291 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Development of Novel Materials with Photocatalytic Effect
Abstract: For capturing solar energy and for converting it into electric power, it is utmost essential to design materials that can be used for this purpose. Generally, the materials deployed for converting solar energy into electric energy are sensitive to UV-radiation. If the material used for this purpose are sensitive to visible light, it will be the breakthrough research. It has been a challenge to design materials with novelty of being …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 2, 2023 · pp. 25–39 Read article
-
Preparation and Characterization of TiO2 Nanoparticles by Green Method
Abstract: In this study, we attempted to synthesize TiO2 nanoparticles utilizing titanium tetrachloride as a precursor and an aqueous extract of Sansevieria plant leaves. Atomic force microscopy (AFM), X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and Brunauer-Emmett-Teller (BET) analysis were used to identify the synthesized TiO2 nanoparticles As per the surface topography, the average diameter of nanoparticles is considered as 67.73 nm. Debye-Scherrer equation was …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 61–67 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
The Effects of Energy Consumption on the Turning Process for Various Work-Piece Materials
Abstract: The study modified its goal to energy-intensive titanium alloys, contrasting traditional and high-speed machining processes. According to the study, a solution is needed to reduce or optimize energy use. So, a machined component energy footprint model was created. Several cutting speeds were used to calculate (k). Material removal rates were compared to cutting speeds for a range of materials and levels of detail. A strategy for selecting optimal cutting conditions …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 54–65 Read article
-
Low density polyurethane based antistatic coating for PU flexible foam for launch vehicles
Abstract: Polyurethane (PU) is a multi functional polymer prepared by using more than two types of monomers. The unique properties of PU come from monomers, thus broadening the applicability of PU in many different sectors. Furthermore, the antistatic property of PU coatings can be improved by the addition of conductive fillers into matrix thus broadening its application in the manufacture of electronic products, aerospace systems and daily necessities and so on. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 25–30 Read article
-
TiO₂ Nanostructured Material-based Gas Sensor for Detecting Oxygen and LPG Gases
Abstract: This Paper investigates the use of TiO2 nanowires and nanotetrapods on glass and silicon substrates for sensing combustible gases such as LPG (Liquid Petroleum Gas) and Oxygen. The growth of Titanium dioxide (TiO2) nanowires/nanorods/nanotetrapods was investigated using both physical and chemical methods. In thermal evaporation method, both with and without vacuum conditions, was employed to synthesize various TiO2 nanostructures. A vacuum coating machine was utilized to create uniform TiO2 thin …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 443–451 Read article
-
Experimental Investigation on Nitrogen Oxides Air Pollutant Reduction Characteristics of Cement Mortar Using Sustainable Photocatalytic Material
Abstract: Emissions of nitrogen oxide (NOx) should be diminished to address the facts of urban air pollution and its health and environmental consequences. This study explores the potential of NOx reduction of photovoltaic pollutants in cement mortar using titanium dioxide (TiO2) as a photovoltaic material. NOx is one of the major pollutants of urban air, related to the problems of smog and acid rain, with serious health hazards. The study focuses …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 26–40 Read article
-
Critical Review on Photocatalytic Polymer Nanocomposites for Indoor Air Purification in Hotels
Abstract: The indoor air quality has become a key measure of health, comfort, and customer satisfaction of a hospitality setting. The challenges that continually affect hotels especially because of volatile organic compounds (VOCs), particulate matter, and microbial pollutants that are present in cleaning agents, furnishing, and human activity. In this regard, the photocatalytic polymer nanocomposites are one of the sustainable and efficient means of purifying indoor air. These materials combine photocatalysts …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 527–541 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Relative Study on Design and Analysis of Iron Box using Different Materials
Abstract: In this study, a steady-state thermal analysis of the soleplate is conducted using four different materials(Aluminium, Stainless Steel, Titanium and Ceramics) using ANSYS Workbench. Also, it ensures that the design adheres to safety standards and promotes efficient energy usage while examining heat distribution. In electric irons, the soleplate is the crucial part, so an analysis is done on this part. Also, a change in design was made to increase safety. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article