Search
481 articles for “Thermal performance”
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article
-
Thermal Performance of Concentrating Solar Panels
Abstract: The study shows a detailed analysis of the thermal performance of concentrating solar panels and the temperature increase due to concentrated solar radiation. This work proposes a configuration to reduce temperature rise, maintain good panel efficiency, and increase output power. The configuration is based on a sandwich structure including a phase change material (PCM), which absorbs the thermal energy excess generated by the concentrated solar radiation onto the PV panel. …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 1–10 Read article
-
Advancements in Thermal Performance of Solar Flat Plate Collectors: A Comprehensive Review
Abstract: Over the past couple of years, solar flat plate collectors (FPSCs) have undergone significant improvement regarding their thermal performance. The review evaluates the improvement of materials such as advanced coatings; metals with a high thermal conductivity; and nanostructured additives. New cover technologies, such as polymeric films and anti-reflection coatings, are discussed, as well as novel insulation technologies such as aerogels and vacuum panels. Also of interest are phase-change materials and …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 2, 2025 · pp. 10–14 Read article
-
Thermal Performance Analysis and Optimization of Pin-Fin Heat Sink Using CFD, Taguchi Method, and Machine Learning
Abstract: Efficient thermal management is essential for improving the performance and reliability of modern engineering systems and electronic devices. This study presents the design, simulation, and optimization of a pin-fin heat sink using SolidWorks for three-dimensional modeling and ANSYS for thermal and computational fluid dynamics (CFD) analysis. Four different pin-fin geometries, namely square, pentagon, octagon, and circular fins, are considered to evaluate their thermal performance under varying operating conditions. Aluminum is …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article
-
Comparative Study on Thermal Performance of Mud Rammed and Concrete Residential Building Envelope in Paro - Bhutan
Abstract: A key factor in assessing the total energy efficiency of a building is the thermal performance of the building envelope. In Bhutan the building energy sector accounts for 15% of the total domestic electricity consumption out of which 50 to 60% accounts for space heating in the temperate region. Previous research findings and data also indicate that heat loss or gain through the building envelop were the most significant contributor …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 9–16 Read article
-
AI-Enabled Optimization of Additively Manufactured Composite Materials for Enhanced Mechanical and Thermal Performance
Abstract: This paper discusses the optimization of multi-objective optimization of enhanced coupling of heat and mechanical properties of 3D printed polymer composite materials by artificial intelligence (AI), as a component of a multi-objective optimization framework. It aims at development of nonlinear printing parameters and material properties relationships to achieve maximum tensile strength and thermal conductivity in polymer composites produced through fused deposition modeling (FDM). Short carbon fiber reinforcement was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 867–891 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Enhancing Mechanical and Thermal Performance of M30 Concrete with Carbon Fibre Reinforcement
Abstract: This study examines the influence of carbon fibre incorporation on the mechanical properties of M30-grade concrete. A series of experimental investigations were conducted to assess the effects of varying carbon fibre content on compressive, split tensile, and flexural strengths. The results indicate a significant enhancement in mechanical performance with the inclusion of carbon fibres, with the optimum fibre dosage identified as 0.75%. At this content, the concrete achieved a peak …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 252–260 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Analysis of Thermal Performance Improvement of Engine Fins by Varying the Materials and Profiles Used at High Temperatures
Abstract: In this thesis, we will design fins using various profiles and materials to identify the optimal combination for a 100cc engine. We will also test different materials for fins to evaluate the engine's heat efficiency. Our study will involve a comparison between the optimized fins and the original aluminum fins currently used. To ensure the optimal performance of the 100cc engine, we will utilize advanced analytical software to thoroughly analyze …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Thermal Dissipation Performance of Metal–Polymer Composite Heat Exchanger for Enhanced Thermal Management in Compact Electric Geysers
Abstract: Most electric geysers these days are made from all-metal stuff, like stainless steel tanks and copper coils for heating, plus mild steel on the outside. Standby heat losses can be 20 to 40 watts, and a 15-litre unit weighs around 6 to 8 kilograms. Manufacturing costs are higher, too. Hard water makes it worse, with limescale building up on the heating elements and cutting thermal conductivity by 10 to 30 …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–651 Read article
-
CFD Analysis: Double Pipe Heat Exchanger, Latent Heat Storage, and BIM-CFD Integration
Abstract: This is a review work covering four research papers. Heat exchangers transport thermal energy across fluids; research in SolidWorks 2014 compared flow simulation to the effectiveness-NTU approach. Slow PCM charging/discharging is a global concern in latent heat storage; research on the influence of flow rate and temperature on melting and solidification durations discovered efficiency in a triple tube heat exchanger design. Advances in computational fluid dynamics for forecasting separated flows …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 19–24 Read article
-
Exploring Envelope Design Through a Biomimetic Approach for Enhanced Thermal Comfort
Abstract: This research explores how biomimicry can transform building envelopes to create comfortable indoor climates, particularly in India’s hot, dry regions. With rising temperatures and dense urbanization, conventional buildings heavily reliant on air conditioning are unsustainable. Biomimicry, inspired by nature’s designs, offers an alternative to enhance adaptability, resilience, and energy efficiency in climate-responsive buildings. The study bridges the gap between conventional envelope design and climate adaptability by examining biomimetic principles for …
Published in International Journal of Architectural Design and Planning · Vol. 3, Issue 2, 2025 · pp. 79–110 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article
-
Performance Testing of Arduino-Based Hybrid Solar Dryer for Drying Apple Slices
Abstract: A novel and high-efficiency hybrid solar dryer was designed and developed in this study to dry apple slices. The thermal analysis of the dryer is conducted by calculating collector efficiency, drying rate, and drying efficiency. Integrating an Arduino-based temperature and humidity monitoring system in a hybrid solar dryer enhances the ability to optimize performance and efficiency. Both the collector and drying chamber are made of aluminum sheet as it has …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1872–1886 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Study on Thermal and Electrical Performance of Pani Doped Graphene Composites under Solar Light Irradiation
Abstract: Here in the research work focusses on the study of thermal and electrical performance of PANI doped graphene composites fabricated by chemical way. A sequence of conducting polymer oxidative method done using the polymerization of aniline in the presence of graphene was deliberate under solar light irradiation. The composites were inspected and characterized using spectroscopy and microscopy studies. The thermal/ electrical performance of PANI and PANI doped graphene were evaluated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1134–1146 Read article