Search
22 articles for “Taguchi technique and analysis of variance.”
-
A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design
Abstract: Fiber-reinforced polymer composite materials have better corrosion resistance, better wear resistance, reduced weight of structure, good thermal/electrical insulation and conductivity, etc. due to their properties its application field include aircraft, space crafts, automotive, infrastructure, marine, and sporting goods. But a major industrial problem is erosive wear of structure components caused by abrasive particles. Solid particle erosion of engineering/structure components caused due to dusty operational conductions. But, even today, researchers worked …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 1, 2020 · pp. 1–5 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Parametric Optimization of TIG Welding Process in Butt Joining of AISI 310 Austenitic Stainless Steel Materials
Abstract: Tungsten inert gas (TIG) welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. Selection of the levels of the input parameters plays a very significant role in determining the quality of a weld joint. The present study is planned to investigate effects of process parameters: welding current, gas flow rate and arc gap on ultimate tensile strength in TIG welding of austenitic stainless …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 12–19 Read article
-
Optimization of Machining Parameters in Electric Discharge Machining of Al 65032
Abstract: Electric discharge machining has the potential to maintain surface topography and produce less stresses and destruction to the components. In this machining there is no contact between the tool and the work piece. The spark generated due to the electrostatic field generation between tool and the work piece. The objective of this experimentation was to create guidelines for electric discharge machining of Al 65032. Aluminum alloy 65032 is one of …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 15–22 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
Improving Quality of Thin Walled Sand Casting through Selective Quality Improvement Methods
Abstract: Six sigma is a quality improvement methodology. In this research paper, six sigma methodology is used for end shield FG 200 Grey casting of electric body. DEMAIC methodology along with Taguchi method is used to minimize the defect in end shield casting. DOE and analysis for variance techniques are used to determine the correlation of defects with the pouring temperature, pouring time and Si percentage and their optimum values are …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 4, Issue 2, 2017 · pp. 28–36 Read article
-
Optimization of process parameters of MIG welding on AISI-SAE1060 Standard Carbon Steel by Taguchi technique
Abstract: The quality of weld joint depends on many input process parameters however, this research paper focuses only on the optimization of input process parameters like welding current, electrode diameter and plate thickness; and analyses the effect of these process parameters on the butt- weld joint strength by using Taguchi technique. In our experimental work, welding currents of 150,180,210 Amp; electrode wire diameter of 0.80, 1.2, 1.6 mm and base metal …
Published in Trends in Machine design · Vol. 5, Issue 2, 2018 · pp. 14–20 Read article
-
An Experimental Investigation of Process Parameters for Aluminum Alloy Composites
Abstract: The objectives of this work are to develop an aluminum alloy composites and investigate machining process parameters effect on the tool wear rate for composites. The composite is enhanced using silicon carbide and graphite. The composite is made by a method called stir casting. Furthermore, it is investigated both mathematically and experimentally. This study takes trial on aluminum alloy composite to see output characteristics tool wear rate are affected by …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 185–193 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 67–80 Read article
-
Study of Wear Behaviour of GFRP Composites filled with Nanofiller using Taguchi Technique
Abstract: AbstractThe GFRP laminates are fabricated by hand lay-up process followed by vacuum bag curing and post cured in a heating oven. The laminates are fabricated with addition of 1%, 1.5% and 2.0% graphene filler and prepared laminates are cut into ASTM standards by using water jet cutting. The density and volume fraction of the void fabricated composite is determined. The three-body abrasive wear test is carried out on abrasion tester …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 33–38 Read article
-
An Approach on Optimization of Thermo Physical Properties of Teak Wood Dust Filled Polymeric Composites
Abstract: The aim of the present work was to prepare the specimens with the help of hand-lay-up technique to measure the thermal properties of TWDPC. The density & voids of TWDPC were measured to determine its physical property & significantly affected some of its mechanical properties. Taguchi experimental method was applied to optimize its thermal properties. The optimal factor combinations were determined with the help of ANOM & the analysis of …
Published in Journal of Polymer & Composites Read article
-
Effect of Varying Surface Grinding Parameters for AISI 1018 Mild Steel by Taguchi based PCA
Abstract: The main purpose of this work is to study the effects of surface grinding parameters on AISI 1018 Mild steel work surface by using three process parameters like Wheel speed (WS), Table speed (TS) and Depth of cut (DOC). This work was conducted on surface grinding machine with model number HMT-P452. Taguchi’s L16 orthogonal array is used which takes sixteen experimental runs to achieve the design matrix of surface grinding …
Published in Journal of Catalyst & Catalysis · Vol. 5, Issue 2, 2018 · pp. 5–14 Read article
-
Analysis of Machining Parameters in Wire EDM with Aluminum Alloy Using PCA and TOPSIS Approach
Abstract: Although the efficiency of traditional cutting processes is inadequate by the mechanical properties of the processed material and the intricacy of the work piece geometry, electrical discharge machining (EDM) being a thermal erosion process, is subject to no such limitations. This paper summaries the suitable use of Taguchi’s L27 orthogonal array which takes 27 experimental runs to develop a mathematical model for correlating the interactive and higher order impacts of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 1–11 Read article
-
A Study on Responses Parameter of EDM Process in EN-353 Steel Using Grey Relational Analysis
Abstract: Electrical discharge machining (EDM) process is the most practically non-conventional machining processes for machining newly developed high strength alloys with high degree of dimensional accuracy and economical cost of production. The last decade has seen an increasing interest in the novel applications of this process, which is particular emphasis on the potential for surface modification. To gain these goals, the consideration is by optimizing the process parameters such as the …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 32–40 Read article
-
Performance Evaluation of Eco-friendly Cutting Fluid in Machining Process—An Approach towards Environmentally Friendly Production
Abstract: The machining industry's evolving environmental consciousness has prompted a growing demand for cutting fluids devoid of chlorine and sulphur, thus fostering sustainable machining practices. This surge in demand is driven by mounting apprehensions over environmental contamination and worker safety. As the industry transitions to modern cutting fluids, it becomes imperative to comprehend their effectiveness and the optimal machine parameters required for their deployment in the turning process. In our current …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 149–160 Read article
-
Effect of Process Variables on the Mechanical Characteristics of form Fabricated Materials
Abstract: Additive manufacturing prominent rapidly advancing technologies for producing 3D-printed products. Initially developed by stratasys, FDM technology emerged during the 1980s. This additive manufacturing technique builds products by extruding semi-molten material through a nozzle onto a platform. PLA and ABS are among numerous thermoplastics that are commonly used as filaments in this procedure. Purpose of research was to observe the effect of variables such as infill percentage, bed temperature, printing speed …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 32–39 Read article
-
Investigation on pitting corrosion rate of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) alloy sheets in KBr solution using TOPSIS
Abstract: Titanium is having good anti-corrosion properties in both basic and acidic medium. However, when it is subjected to severer heating processing like welding, there is a possibility of corrosion formation at the weld joint. In the present work Pulsed current MPAW is used for joining 0.5 mm thick Titanium (Ti-6Al-4V) alloy sheets. Peak Current, Base Current, Pulse Rate and Pulse Width are considered as input parameters and fusion zone corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 37–53 Read article
-
Drilling Parameters Optimization in LM6/B4C/Fly ash Hybrid Composites by Taguchi Technique
Abstract: Aluminium matrix composites (AMCs) are challenging to machine due to its abrasive characteristics. Because of the broad adoption of MMCs, it is vital to create sufficient equipment to facilitate efficient manufacturing. The current study utilizes signal-to-noise ratio (S/N) analysis to determine the ideal machining parameters for drilling AMC’s. The goal with this study is to investigate the effect of feed rate (FR), drill type (D), speed (SS), reinforcing material R …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 890–897 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Optimization of Process Parameter in Electrical Discharge Machining
Abstract: This is the non-traditional machining process. The high surface finish of the material is required. More complex shape of material is required. Wire EDM is one of the nontraditional machining processes. Surface roughness and kerf width are of crucial in the field of machining processes. This paper uses the Grey relational theory and Taguchi optimization technique, in order to optimize the cutting parameters in Wire EDM for D3 steel material …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 2, 2020 · pp. 4–10 Read article