Search
90 articles for “Taguchi Design of Experiments”
-
A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design
Abstract: Fiber-reinforced polymer composite materials have better corrosion resistance, better wear resistance, reduced weight of structure, good thermal/electrical insulation and conductivity, etc. due to their properties its application field include aircraft, space crafts, automotive, infrastructure, marine, and sporting goods. But a major industrial problem is erosive wear of structure components caused by abrasive particles. Solid particle erosion of engineering/structure components caused due to dusty operational conductions. But, even today, researchers worked …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 1, 2020 · pp. 1–5 Read article
-
Trusting on the soft Global platform– a Functional Imperative
Abstract: From ancient times, when simplicity prevailed at isolated civilisations, to date, when the world has become a global village, social complexities have correspondingly increased, in sympathy of size. As interspersed people are no longer in physical contact, Quality of their social interactions is also impacted. Should one continue to trust others as in past, vis-à-vis this enlarged social platform {which euphorically uses internet technologies in a world-wide networking by wire}, …
Published in OmniScience: A Multi-disciplinary Journal · Vol. 1, Issue 1, 2011 · pp. 25–35 Read article
-
Taguchi based Modeling and Optimization of Tool Wear Rate in Die-Sink EDM
Abstract: With the increasing demand for new, hard, high strength, and temperature-resistant materials in various engineering applications, especially in the field of mold manufacturing, aeronautic, automobile and die manufacturing industries, the development and application of electro-discharge machining (EDM) has become increasingly important to machine such difficult to machine hard materials. In this paper, the machining of EN-31 Die steel using EDM with a copper electrode by using Taguchi’s experimental design and …
Published in Journal of Production Research & Management · Vol. 2, Issue 1, 2012 · pp. 30–35 Read article
-
Design of Experiments to Hard Turning: A Review
Abstract: Hard turning is the process of machining hardened steels that are above 45 HRC. In manufacturing, hard turning has emerged as a potential area over grinding as a finishing operation. In the present paper, a review is done on Design of Experiment (DOE) techniques that have been employed on various hard turning processes by researchers. DOE is one of the widely used methods for experimental study of many manufacturing processes …
Published in Journal of Production Research & Management · Vol. 3, Issue 3, 2013 · pp. 1–12 Read article
-
Effect of Different Configurations of Reinforcement and Post-Cure Temperature Detailed Survey
Abstract: Composites with natural fillers have applied many applications, such as interior housekeeping, building and so on but their findings are seldom examined in the mechanical, tribological and dynamic situation. The addition of fillers in GFRP composites enhances the mechanical, thermal and tribological properties due to filler occupied in voids in thermoset resin. There has also been a lot of work done in quantifying the consistency of the operating parameters through …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1738–1753 Read article
-
A Taguchi approach for determination of parametric dependence in absorber tube of parabolic trough solar collector with roughened surfaces
Abstract: The Taguchi experimental design approach is used in this study to offer the ideal design parameters for the absorber tube with roughened surfaces. In order to determine parametric dependence, passive heat transfer augmentation strategies have been used in the parabolic trough receiver in this article by applying the Taguchi approach. So, for better understanding, two case studies are analyzed using two augmentation technique i.e., wire coil and twisted tape inserts. …
Published in Journal of Thermal Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 40–47 Read article
-
Optimization of Milling Parameters Using Taguchi Method
Abstract: This paper discusses the use of Taguchi technique for minimizing the surface roughness in machining Aluminium 6061 alloy with carbide tool. The experimental study was carried out in a CNC vertical machining centre (VMC). The experiments have been planned using Taguchi’s experimental design technique. The machining parameters used are Depth of cut (doc), Spindle speed (N), and Feed rate (f). The effect of machining parameters on surface roughness is evaluated …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 2, 2015 · pp. 50–55 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Prediction of Surface Roughness in Boring Operation on Mild Steel using Taguchi Approach
Abstract: Surface quality is one of the specified customer and technical requirements for machined parts. There are many cutting parameters that have an effect on surface roughness, but those are difficult to quantify adequately. In a finished boring operation, many parameters such as cutting speed, feed and depth of cut are known to have a large impact on surface quality. In this paper, experimental work on a Jig boring machine has …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 29–34 Read article
-
Analysis and Optimization of End Milling Machining Parameters for Polypropylene composite using Taguchi based GRA
Abstract: This paper offerings the effect of machining parameters on Surface roughness (Ra & Rz) and Machining time during end milling of polypropylene material on CNC milling machine at different levels. In this effort, the machining parameters namely milling speed (MS), feed (Feed) and depth of cut (DOC) were designed using Taguchi L16 experimental design matrix. The impact of all the input parameters on the response parameters (surface roughness and machining …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 91–100 Read article
-
Operational Modeling of Cutting Parameters Influence on Power Consumption and Surface Roughness in CNC Turning of AISI 304
Abstract: This paper describes the power consumption and surface roughness predictive model development in computer numerical control (CNC) turning of AISI 304 austenitic stainless steel using Taguchi method and response surface method (RSM). The experiments are designed and conducted based on Taguchi’s design of experiments (DoE) with cutting speed, feed rate, depth of cut and nose radius as the process parameters. Signal-to-noise (S/N) ratios of responses are calculated to identify the …
Published in Journal of Production Research & Management · Vol. 3, Issue 1, 2013 · pp. 8–15 Read article
-
Parametric Optimization of TIG Welding on AISI-304 Stainless Steel Plate by Taguchi based RSM Method
Abstract: The effect of process parameters of TIG welding like the present work focuses the findings of an experimental investigation into the effects of Welding current, Gas flow rate, Electrode diameter, and Root gap on the bead geometry of AISI-304. It is found that the process parameters considered affected the mechanical properties with great extent. Taguchi methodology is used to analyze the effect of each welding process parameters and optimal process …
Published in Trends in Machine design · Vol. 4, Issue 2, 2017 · pp. 30–40 Read article
-
Optimization of Surface Roughness and Material Removal Rate for Dry Turning Operation in CNC Lathe UsingTaguchi Method
Abstract: In this work the cutting of AISI 1045 material will be carried out using CNC lathe followed by Taguchi methodology. Taguchi method is usedto formulate the experimental layout. A Taguchi L9 design of experiment (DOE) will be applied and the analysis ofvariance (ANOVA) will carried out to determine the effect of process parameters on process performance. To analysethe effect of each parameter on the machining characteristics and to predict the …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 46–53 Read article
-
A Study on Factors Affecting the Tensile Welding Strength of Joint Using Taguchi Methods: A Review
Abstract: The welding process over the period of time has grown into a more formidable process. Its application has also increased manifolds. However, with the increase in applications, it is also important to know the about the factors which affects the most on the strength of the welds. In this paper, the tensile strength of the welded joint has been considered. The factors considered for the research are on the basis …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 1–4 Read article
-
An Experimental Investigation on the Characterization of Al6061-Polymer Adhesive Joint by Design of Experiment
Abstract: Aluminium alloys and polymers are the light-weight materials extensively used in structural, aero-space, automobile and marine applications. Al6061 alloy and nylon 6 were joined through the adhesive bond and their characteristics were analyzed. However, joining of these dissimilar materials for the evolution of hybrid engineering structures were complex because of their difference in physical, chemical and mechanical behaviours. The Taguchi’s, Design of Experiment were conducted on the various mixture of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 206–219 Read article
-
Machinability and Reliability Analysis of Al6063–Al2O3 Metal Matrix Composites Using Image-Based Flank Wear Evaluation
Abstract: This study explores the machinability and reliability characteristics of Al6063–Al2O3 metal matrix composites (MMCs) as analogues for polymer–metal hybrid composite systems, focusing on their potential use in lightweight structural and metal matrix composite-integrated applications. The composite specimens were fabricated through stir casting with 3% and 9% Al2O3 reinforcements, followed by mechanical characterization that confirmed significant enhancements in hardness and strength compared to unreinforced Al6063. Machining experiments were performed using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 264–290 Read article
-
Analysis of Factors Affecting the Welded Joint using Design of Experiments: A Review
Abstract: The welding process over the period of time has grown into a more formidable process. Its application has also increased manifolds. However, with the increase in applications, it is also important to know the about the factors which affects the most on the strength of the welds. In this paper, the tensile strength of the welded joint has been considered. In this research, the Gas Metal Arc Welding has been …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 72–75 Read article
-
Optimization of dry sliding wear behaviour of AA6061 (as cast) and AA6061 (HT) aluminium alloy using design of experiment approach
Abstract: The dry sliding wear behaviour of AA6061 (as cast) and AA6061 (HT) aluminium alloy has been optimized using Taguchi Orthogonal array design. Experiments were conducted to study the influence of various parameters like, load(N), sliding speed(m/sec) and sliding distance on the dry sliding wear behaviour of both AA6061(as cast) and AA6061(HT) aluminium alloy using L9 orthogonal array design. The experiments were carried out to determine the significant controlling parameter affecting …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 1–6 Read article
-
Mechanical and Tribological Properties of Cr3C2-NiCr Coated Ti6Al4V Implant Alloy
Abstract: Ti6Al4V alloys are widely used in medical and aerospace applications due to their superior mechanical properties. But, Ti6Al4V alloys are poor in tribological properties such as wear. Poor wear resistance consequences in the formation of wear debris in human implants and leads to inflammation and pain. In this work, Cr3C2-NiCr coatings were applied to improve the mechanical properties such as tensile strength, hardness and tribological properties such as wear resistance. …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 3, 2017 · pp. 28–42 Read article