Search
108 articles for “Percentage of Reinforcement”
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Experimental Study of Flexural Behavior of High Strength Concrete
Abstract: Flexural test results generated on nine reinforced concrete beams to evaluate the implications of using high-strength concrete (HSC) are reported. The stress block parameters on the current IS456-2000 code are limited to concrete strength up to 55 MPa. This paper looks at the applicability of IS456-2000 stress block parameters for HSC beyond the scope of code IS456-2000. Particular emphasis has been given to the issues of maximum compressive strain, ultimate …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 2, 2019 · pp. 19–23 Read article
-
Effect of silicon carbide on the mechanical properties of the rice husk, corn cob polymer matrix composites
Abstract: Throughout the world there have been alarming concerns over the use of non renewable resources during manufacturing of goods and associated environmental legislations. Therefore, the use of natural materials and fabrication of composites there from, particularly, development of natural fibre reinforced polymer composites is gaining significant attention. Although natural fibre reinforced composites (NFRCs) show strong application prospects, various materials and processing related challenges needs to be addressed to achieve long-term …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 39–45 Read article
-
Optimum Machining Parameters for Al 7075 Hybrid Metal Matrix Composites Using Multi-objective Optimization Technique and the Modified Taguchi Approach
Abstract: Lightweight composite materials with improved mechanical properties are widely used in industries. There is a need to obtain optimum machining parameters of such hybrid composites. This paper uses reliable multi-objective optimization technique and modified Taguchi approach to determine optimal machining parameters such as speed (NS) varying from 1000 rpm to 1500 rpm, feed rate (FR) from 0.10 mm/rev to 0.20 mm/rev, depth-of-cut (DC) varied from 0.5 mm to 1.5 mm …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 269–278 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Enhanced Mechanical Properties of AZ31 Magnesium Alloy Composite Reinforced with Carbon Nanotubes and Nano hydroxyapatite
Abstract: Magnesium alloys represent a novel category of biodegradable materials, offering numerous advantages in addressing the limitations associated with conventional biomedical materials. Magnesium-based metallic biomaterials offer a promising solution for fixing fractures, ensuring effective treatment without the inconvenience of subsequent implant removal procedures. In the present work, AZ31 Mg-alloy was chosen as the base material. Five specimens were meticulously fabricated, each varying in weight percentages of reinforcement materials: 0wt%, 0.5wt%, 1wt%, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 206–217 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
Experimental Investigation on Mechanical Properties of Hybrid Fibres in M25 Grade Concrete with Partial Replacement of Cement Using GGBS
Abstract: An investigation is made on the mechanical properties of Hybrid Fibre Reinforced Concrete (HFRC) using steel (ST) fibres and Recycled polyethylene terephthalate (RPET) fibres in M25 grade concrete. Steel fibres and Recycled PET fibres were added individually as mono fibres and then they were added together as hybrid fibres into the concrete mix for a fibre volume fraction of 1%. Mechanical properties such as compressive strength, split tensile strength, flexural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 2, 2016 · pp. 51–56 Read article
-
Impact of various Fibers on the Mechanical and Durability Performance of Fibre-Reinforced Concrete with SBR latex
Abstract: Recent years included a proliferation of research efforts focused on fibre reinforced concrete (FRC), an innovation that perceives extensive application in the construction industry. FRC's enhanced mechanical properties ahead of conventional concrete have broadened its significance recently. Natural fibers have been produced in response to expanding environmental deterioration in recent years, and research is currently continuing with the goal of utilizing them in the construction field. This study explores the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 26–40 Read article
-
Influence of the Load, Sliding Speed, and Weight Fractions on Wear of a Hybrid Aluminium Metal Matrix Composite
Abstract: The vital focus of the research is intended in examining the aspect that impact the rate of wear for a hybrid aluminium metal matrix composite. The percentages of two reinforcements that are employed, the weight, and the sliding speed are the variables taken. The procedure entails employing the vortex-stir casting process to produce the hybrid composite. Utilizing a pin-on-disc apparatus, the fabricated composite materials are evaluated in compliance with the …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 188–198 Read article
-
Utilization Waste Products as Reinforcement in Development of Composite Material: A Review
Abstract: In the modern world, businesses are responsible for producing a diverse range of waste products. Rice husks and eggshells are two examples of wastes that fall into this category. Both of these types of garbage are responsible for contributing to pollution in a variety of distinct ways. Eggshell, which is a common consequence of industrial operations, is one of the most significant contributors to the contamination of soil. This is …
Published in Journal of Polymer & Composites Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Synthesis and Characterization of Ether Containing Tetraglycidyl Epoxy Reinforced with Amine Functionalized Graphene Oxide (F-Go) and It’s Nanocomposites
Abstract: AbstractTGDDE matrix material along with functionalized graphene oxide (F-GO) as reinforcement was used to develop a unique skeletally modified tetra functional epoxy nanocomposites. Amine functionalization of graphene oxide nanoparticles (F-GO) on its surface was achieved by grafting 3-aminopropyltriethoxysilane (APTES) as coupling agent. The FT-IR spectrum revealed that the silane coupling agent was covalently bonded to the surface of graphene oxide nanoparticles, offering better dispersibility and compatibility with TGDDE epoxy matrix. …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 39–51 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Impact of Red Stone Dust and Polymer Fabric in Enhancing the Properties of Black Cotton Soil
Abstract: To enhance the mechanical properties of problematic black cotton soil, engineers are focusing on reinforcing the soil with geosynthetic materials. This attention is particularly directed towards improving the strength characteristics of black cotton soil, given its inherent challenges associated with volume changes and plasticity. In this comprehensive study, red stone dust waste is introduced in varying percentages ranging from 5% to 35% to stabilize the black cotton soil. The goal …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 35–43 Read article
-
A Study On Improving The Performance Of Concrete Using Coconut Fibers
Abstract: The aim of this study is to explore the incorporation of coconut fiber into M30 grade concrete and assess its impact on the strength characteristics. A literature review of different fibers is conducted and highlighting the working parameters. This research focuses to explore the efficacy of employing coconut fibers as micro reinforcement in concrete. The investigated properties encompass the compressive strength of the coconut fibers reinforced concrete (CFRC) at different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 26–36 Read article