Search
51 articles for “PET composites”
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Development and Characterization of Antimicrobial Polymer Composites for Food Packaging Applications
Abstract: The increasing demand for sustainable and antimicrobial food packaging materials has led to extensive research in polymer-based composites. This study focuses on developing a polyethylene terephthalate-ethylene vinyl acetate (PET-EVA) composite reinforced with metal oxide nanoparticles (MONs), including Cu₂O, ZnO, and MgO₂. These nanoparticles were selected for their antimicrobial properties and ability to enhance the functional characteristics of the composite. Structural, chemical, mechanical, and barrier properties were extensively evaluated to determine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 86–93 Read article
-
Stabilization of Reinforced Earth Wall Backfill Using Steel Slag and Recycled PET Fiber: A Composite Material Approach
Abstract: Reinforced Earth (RE) walls are widely used in infrastructure due to their structural efficiency and ease of construction. However, they typically require high-quality granular backfill, which may not be readily available or cost-effective in many regions. This study investigates the potential of utilizing locally available sandy clay soil stabilized with industrial and plastic waste materials specifically 20% steel slag and 0.75% shredded polyethylene terephthalate (PET) fibers, as an alternative backfill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 110–127 Read article
-
Comparative Analysis of the Structural Integrity and Dimensional Stability of Additively Manufactured Biopolymers vs. Thermoformed PETG: A 1-Year Retrospective Study on Polymer Performance in Orthodontic Applications
Abstract: Objective: This study aimed to evaluate the long-term dimensional accuracy and structural performance of direct 3D-printed biopolymers compared to conventional vacuum-formed Polyethylene Terephthalate Glycol (PETG) composites. The investigation focused on how different polymer processing methods (additive manufacturing vs. thermoforming) influence material thinning and resistance to occlusal stress. Methods: A retrospective analysis was conducted on 60 cases (n = 60) of post-orthodontic maintenance. The sample was divided into two cohorts: Group …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 140–146 Read article
-
Development of Bio-Based Polymer Composites for Sustainable Construction Materials
Abstract: The demand for eco-friendly sustainable construction materials has gained significant interest in the development of bio-based polymer composites as ecologically suitable alternatives to traditional petrochemical-based polymer composites. The environmental problems associated with non-biodegradable, high-carbon-footprint polymer composites make their more bio-based counterparts an attractive option that offers both environmental and structural benefits. To evaluate environmental impact and industrial feasibility, a comprehensive life cycle assessment was performed. The methodology adopts optimized bio-based …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 194–208 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Greener 3D Printing: The Role of Artificial Intelligence in Sustainable Polymer and Composite Manufacturing
Abstract: The integration of sustainable materials with additive manufacturing (AM) technologies marks a significant step towards environmentally responsible production. Biodegradable polymers, recycled thermoplastics, and bio-based composites, when used in 3D printing, offer the potential to reduce the ecological footprint of manufacturing. However optimizing the interplay between material properties process parameters, and product performance remains a complex challenge. This review examines how artificial intelligence (AI) is being applied to address these challenges …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 288–300 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Need of Biocomposite Polymers In 3D Printing: Addressing Environmental and Public Health
Abstract: Concerns over the effects of conventional polymer materials on the environment and human health have been highlighted by the growing use of additive manufacturing or 3D printing. Traditional synthetic composites are usually made of petroleum-based plastics that include a range of chemical agents, such as additives and plasticizers. The increasing use of 3D printing has sparked concerns about the environmental and health risks linked to traditional polymer materials. With an …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 135–142 Read article
-
Advanced Polymer-Based Packaging Composite with Metal Oxide Nanofillers: Synthesis, Characterization, and Applications
Abstract: The development of high-performance polymeric composites for food packaging applications has gained significant attention in recent years due to increasing concerns about food safety, durability, and environmental impact. The increasing demand for active packaging materials that not only protect food but also extend shelf life has led to extensive research into polymer-based antimicrobial composites. Traditional packaging materials, including plastics, ceramics, and metals, often lack bioactive properties and can contribute to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 56–63 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
AI-Driven Optimization of Biopolymer Composite Formulations Using IoT Data Streams
Abstract: Biodegradable polymer composites have emerged as a sustainable alternative to petroleum-based materials in packaging, biomedical, and structural applications. However, traditional formulation techniques for reinforced polymer composites often lack precision and fail to adapt to real-time variations during processing, resulting in suboptimal material performance. This research proposes a real-time AI-IoT-enabled framework to optimize biopolymer composite formulations. The goal is to intelligently tune composite properties such as mechanical strength, moisture resistance, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 85–100 Read article
-
Synthesis and Functional Group Analysis of Solution Processed Zinc Oxide Thin Film Grown on Polyethylene Terephthalate
Abstract: Flexible electronics field is growing every day. Existing technology is facing issues like brittleness, toxicity, inadequacy. Fabrication cost increases in processing of such materials. In this work, zinc oxide nanoparticles synthesized by solution processing technique were used to grow 120nm thick thin film (TF) on Polyethylene terephthalate (PET). This method reduces the processing cost and Zinc Oxide (ZnO) is cheaper and abundant in comparison to other semiconductors option. Material was …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 56–66 Read article
-
Entrepreneurship Development at The National Petroleum Products Refining Company
Abstract: Petroleum products are very widely used materials, which are processed from crude oil and in oil refineries. Refineries can process petroleum products for various purposes according to the composition of crude oil and customer requests. The purpose of this research is to develop entrepreneurship in the National Petroleum Products Refining Company. This research is a developmental applied research according to the research objectives. In this research, using the theme analysis …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 44–60 Read article
-
Investigating the Surface Defects and Structural Integrity of 3D Printed Hydrogen Storage Cylinders in UAV Applications
Abstract: This research explores the processing and manufacturing challenges of 3D printed polymer composites for high-pressure hydrogen storage in UAVs. The study focuses on addressing surface integrity and structural robustness issues inherent in additive manufacturing. Finite Element Analysis (FEA) was conducted on four thermoplastic polymer ABS, PET-G, HDPE, and Nylon to assess their mechanical performance under 35 MPa of pressure. Results revealed that PET-G and ABS provided better stress distribution and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 161–191 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Sustainable Polymer-Based Cementitious Composites with Granite Dust as Fine Aggregate: Strength and Durability Evaluation
Abstract: This study investigates the potential for creating a new kind of cementitious composites that is obtained through the different compositions of rocks and chemicals in which granite dust that is helpful in resistance of chloride penetration and heat of hydration as a substitution with sand in composite. The primary goal of this study focuses on the effect of the stone waste like polymer matrix on evidence bases of researches for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 325–339 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article