Search
49 articles for “PCM”
-
Nano-enhanced Bio-based Phase Change Materials: A Brief Review
Abstract: The high latent temperatures and variable melting points of bio-based phase change materials make them ideal for thermal control. This covers heat regulation for medical and pharmaceutical items, building comfort, and high-end electronics and automobiles. In recent years, research and application of energy-saving materials and technologies in buildings has increased strength. Modern construction technology aims to keep old and new structures energy efficient. TES employing PCMs is an energy-efficient approach. …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 15–27 Read article
-
PCM with Multiple Node Injections
Abstract: Phase-Changing Materials (PCM) are currently being investigated for use as heat storage in solar energy applications. To analyze the temperature profile, morphing tree structures are used to simulate the melting algorithm of Phase Changing Material with increasing branch numbers. The melting behavior is simulated for invading lines of heat, which range from single-lined, zero branch insertions, to insertions with two branched lines. The research aims to address the growing demand …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 1, 2024 · pp. 2–7 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Double slope Solar Still by using Nano Embedded Binary Eutectic PCM: A Review
Abstract: Solar distillation is an economical and eco-friendly technique. Concerns about the increasing need for clean drinking water for home and commercial uses are spreading around the world. In rural and tiny settlements with limited access to water and electricity, solar water distillation is a viable method for removing salty water from drinking water. The efficiency and performance of thermal energy storage materials based on phase change materials (PCM) and nanofluids …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 29–33 Read article
-
Performance Analysis of Graphene Reinforced Sug-ar-Alcohol Based PCM for Thermal Energy Storage System
Abstract: The thermal-conductivity of the Phase Change Materials (PCMs) of thermal heat storage systems is improved by distributing nano-particles in the basic PCM for a faster rate of heat transfer. During the charging and discharging procedures, the heat transfer properties of the newly created Sugar-Alcohol based PCM dispersed with 1.0 wt% graphene nanoparticles in a shell and helical tube storage tank were examined. The helical tube configuration caused the melting and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 133–147 Read article
-
Heat Sink-PCM Device for PV Efficiency Improvement
Abstract: This paper is focused on the development of a second stage of a previous work where the PV panel efficiency is improved by using a hybrid system made up of a PCM attached to the rear side of the panel. This evolved stage incorporates a heat sink unit to improve the distribution of the heat removed from the panel; this improvement reduces the elapsed time to reach the steady state …
Published in Journal of Thermal Engineering and Applications Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Comprehensive Thermal and Environmental Investigation of An Enhanced Evacuated Tube Solar Water Heater with Wavy Tape and Latent Heat Storage
Abstract: Evacuated tube solar collectors (ETSCs) are widely used for thermal energy applications; however, enhancing their thermal and exergetic efficiency remains a challenge. This study investigates performance enhancements through structural and material alterations. Four ETSC cases were tested experimentally, case-1: a standard ETSC, case-2: Wavy tape (WT) inserted ETSC, case-3: Phase change material (PCM) integrated ETSC, and case-4: Dual-Enhanced ETSC (PCM + WT). A binary eutectic PCM was utilized for latent …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 1–16 Read article
-
Analysis of Thermo-Mechanical Properties in Cement Mortar Using Synthesized Silicate Microencapsulation of Phase Change Materials by Sol-Gel Process
Abstract: This investigation delves into improving building thermal comfort using microencapsulated phase change materials (PCM@SiO2) in cement mortar. The encapsulation process, achieved via a sol-gel method, envelops PCM in a silicate shell Differential Scanning Calorimetry (DSC) and Fourier-Transform Infrared Spectroscopy (FTIR) were used to confirm the thermal properties and integrity of encapsulated PCM, which showed an encapsulation efficiency of 92.7% and a thermal storage capacity of 99.7%. The study involved the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 152–160 Read article
-
Significance of Nanoparticles in Phase Change Materials as Heat Transfer Fluid for Solar Heat Absorption
Abstract: The utilization of solar energy as a sustainable and eco-friendly power source has gained significant traction in recent years, with innovations constantly evolving to improve efficiency and effectiveness.one such innovation lies in the integration of nanoparticles into phase change materials (PCMs) to enhance their heat transfer capabilities, making them ideal candidates for solar heat absorption applications. This paper delves into the significance of nanoparticles in PCMs as heat transfer fluids …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 57–65 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Experimental Analysis Of Thermal Behaviour Of Phase Change Materials In Cooling Applications Of Roof Top Building Slabs
Abstract: In this research article, different phase change materials are incorporated inside the slabs to reduce the heat transfer from the roof. Experiments are conducted during summer season March 2021 to the time lag decrement factor and heat flux to that of results are compared with RCC slab to that of Green material I (CaCl26H2O) and Green Roof with Green material II (48%CaCl2+4.3%NaCl+0.4%KCl+47.3%H2O). On comparison Green Slab II is having better …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 102–114 Read article
-
Bio-inspired Thermo-responsive and Self-Healing Polymer–PCM Hybrids for Next-Generation Smart Textile Applications
Abstract: The integration of phase change materials (PCMs) into flexible polymers represents a promising strategy for developing smart textiles with advanced thermal regulation and mechanical adaptability. However, the challenges of PCM leakage, poor mechanical strength, and durability under cyclic stress have limited their practical applications. In this study, we present a novel self-healing and elastic composite based on thermoplastic polyurethane (TPU) incorporating 30 wt% microencapsulated PCM (mPCM) and dynamic disulfide bonds …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 228–238 Read article
-
Exploration of Advanced Phase Change Materials for Thermal Energy Storage in Renewable Energy Systems: An Overview
Abstract: Phase Change Materials (PCMs) are increasingly vital for improving thermal energy storage (TES) systems. Their ability to absorb and release heat efficiently makes them ideal for renewable energy applications, enhancing energy efficiency, reducing waste, and supporting sustainable energy solutions across various sectors like solar power and building temperature regulation. Their ability to store and release latent heat during phase transitions makes them ideal for addressing the intermittency of renewable energy …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 3, 2025 · pp. 10–14 Read article
-
Investigation of Exergy and Energy with Fibre Reinforced Plastic Composite (FRP) Tube Based Solar Still using PCM material via Theoretical and Computational Approach
Abstract: A FRP (Fibre Reinforced Polymer) material-based solar still is an advanced design approach in solar desalination systems, where the traditional construction materials (like metal or concrete) are replaced or enhanced with FRP composites. A FRP composite material tubular solar still is a lightweight desalination equipment with a substantial condensing area in comparison to other types of solar stills. Nonetheless, their effectiveness is often limited by fluctuating climatic circumstances. This study …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 66–78 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Investigations of A Solar Dryer With Thermal Storage
Abstract: This study presents the design, building, and performance evaluation of a low-cost mixed-mode natural convection solar cabinet dryer in conjunction with a latent heat thermal energy storage system. The work's goal is to reduce post-harvest losses in rural and semi-urban areas by offering an effective and reasonably priced method of preserving agricultural goods. The dryer is made out of a transparent polycarbonate lid to allow for solar heat gain, an …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 1, 2026 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Advancements In Energy Storage Materials Are Overcoming Challenges and Shaping Future Innovations
Abstract: The pursuit of efficient energy storage technologies is critical for advancing renewable energy systems and improving the performance of electric vehicles. This review emphasizes the synergistic contributions of polymers and composite materials in phase change materials (PCMs), zinc-based batteries (ZnBs), lithium-ion batteries (LIBs), and graphene-based systems. PCMs, particularly polymer-encapsulated and polymer-stabilized composites, demonstrate a remarkable ability to store and release thermal energy, enabling improved thermal management and operational stability. In …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 704–723 Read article