Search
1981 articles for “P Controller” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Comparison of Speed Control of PMSM using Adaptive Fuzzy Logic Controller and PI Controller
Abstract: Permanent Magnet Synchronous Motors (PMSM) are widely used in low and mid power applications such as computer peripheral equipment, robotics, adjustable speed drives and electric vehicles. The growth in the market of permanent magnet motor drives has demanded the need of simulation tools capable of handling motor drive simulations. Simulations have helped the process of developing new systems including motor drives, by reducing cost and time. In a closed loop …
Published in Journal of Power Electronics and Power Systems · Vol. 8, Issue 3, 2018 · pp. 24–30 Read article
-
Control and Stabilization of Maglev System Using 2-DOF PID Controller and its Comparative Analysis with Other PID Controller
Abstract: AbstractA Magnetic air suspension or a magnetic levitation has turned out to be a very capable technique in the fast common transport system because of its frictionless motion. Due to open-loop system, the elevation in magnetic air is an extremely unstable system; and hence to stabilise this it desire a controller in order to its stabilization and position-tracing. Because of its nonlinear behaviour, its controller implementation is a tough task. …
Published in Journal of Electronic Design Technology · Vol. 11, Issue 2, 2020 · pp. 1–6 Read article
-
Power Control of Doubly Fed Induction Generator (DFIG) Based on IP Controller
Abstract: Conventionally, the indirect power control of Doubly Fed Induction Generator (DFIG) has been developed based on conventional Proportional-Plus-Integral (PI) controller due to its simple construction and implementation. The steady-state error minimization, overshoot elimination and disturbance rejection are not possible where the gains of PI controller are chosen by trial and error method. The steady-state error and disturbance rejection can be possible if the gains of PI controller are chosen by …
Published in Journal of Power Electronics and Power Systems · Vol. 6, Issue 3, 2016 · pp. 23–32 Read article
-
Simulation of Pole Placement Controller for an Active Bus Suspension System
Abstract: Designing a suspension system for a bus is an interesting and challenging control problem. When the suspension system is designed, a one quarter bus model (one of the four wheels) is used to reduce the complexity of the problem. The active suspension system is the one which has a force actuator in parallel to passive suspension. The open loop time response of the suspension system is damped oscillatory and has …
Published in Journal of Automobile Engineering and Applications · Vol. 2, Issue 2, 2015 · pp. 13–18 Read article
-
Automatic Power Theft Control Using Peripheral Interface Controller (PIC) Microcontroller
Abstract: AbstractVery often in Electricity board, there is a need to monitor the power consumption patterns of individual units due to power theft. Some rather minor factors can cause huge amounts of unnecessary power consumption, which often go unnoticed and incur huge expenses for Electricity board. This project aims at providing a system with which the power consumption of individual unit can be monitored and recorded from a central location.Keywords: Electricity, …
Published in Journal of Microcontroller Engineering and Applications · Vol. 5, Issue 2, 2018 · pp. 6–9 Read article
-
Simulation of Neural Network based PID Controller for Pressure Process
Abstract: This paper provides a Neural Network PID controller based on Back Propagation (BP) algorithm applied to pressure control in a tank. The controller has many advantages like that more convenient in parameter regulating, better robust. Neural network is to adjust the parameters of PID controller based on the operational status of the system, to achieve a better performance, making the output of the output neurons corresponding to the three adjustable …
Published in Journal of Control & Instrumentation · Vol. 4, Issue 1, 2013 · pp. 23–27 Read article
-
APF for Mitigation of Current Harmonics with p–q and Id–Iq Control Strategies using PI Controller
Abstract: Due to a large amount of non-linear power electronic equipments, impact and fluctuating loads (such as that ofarc furnace, heavy merchant mill and electric locomotive, etc), problems of power quality have become moreand more serious with each passing day, as a result Active power filter (APF) gains much more attention due toexcellent harmonic compensation. But still the performance of the active filter seems to be in contradictions withdifferent control strategies. …
Published in Trends in Electrical Engineering · Vol. 1, Issue 1-2-3, 2011 · pp. 1–12 Read article
-
Speed Control of A Doubly Fed Induction Motor using Integral Plus Proportional Controller
Abstract: Conventionally, the speed control manipulate of Doubly-Fed Induction Motor (DFIM) has been developed primarily which is based on traditional Proportional-Plus-Integral (PI) controller due to its simple construction and implementation. The steady-state error minimization, overshoot removal and disturbance rejection are not possible in which the benefits of PI controller are chosen through trial and errors approach. The steady-state error and disturbance rejection may be viable, if the benefits of Proportional-Plus-Integral controller …
Published in Journal of Power Electronics and Power Systems · Vol. 7, Issue 3, 2017 · pp. 38–46 Read article
-
Production Control Mechanisms and POLCA Performance in a Divergent Production Line
Abstract: Production control mechanism is a critical element in today’s production situation, where production systems compete on quick response and resource efficiency. The purpose of a production control mechanism is to define the best time to release material and orders. POLCA is a simple production control mechanism that on one hand tries to reduce throughput time and on the other hand helps the manager to control work-in-process inventory. In addition to …
Published in Journal of Production Research & Management · Vol. 2, Issue 1-2-3, 2012 · pp. 26–39 Read article
-
Comparative Realization of 2DoF PID Controllers for Flow Process with Measurement Delay
Abstract: Two Degree-of-Freedom (2DoF) PID control techniques presented in this paper were developed based on optimal control theory and with the Anti-Integral Windup (AIW) scheme. The controllers were implemented for a laboratory flow process setup. First Order Process with Dead Time (FOPDT) models had been identified by step testing. The process responses showed a significant non-minimum phase dynamics exhibited for the specific step inputs applied. The measurement delay was considered as …
Published in Journal of Control & Instrumentation · Vol. 6, Issue 1, 2015 · pp. 1–8 Read article
-
Model Predictive Control for a Distillation Column Model
Abstract: Model Predictive Control (MPC) is a multivariable control (requires specific handling of each input as coupling and interaction is of a far greater effect) and uses the internal dynamic model of the process, past control moves and an optimization cost function over the receding prediction horizon, to calculate the optimum control moves. In this paper, the relation between MPC parameters was studied on process constraints. Conical tank level single-input-single-output (SISO) …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 3, 2014 · pp. 11–19 Read article
-
Model Based Controller Design for Position Control of Servo Controlled Hydraulic Actuator against Air Entrainment
Abstract: Position control is important for numerous industrial and aircraft applications. Electro-hydraulic actuators are used for position control for advantages they provide over other actuation systems. The hydraulic fluid used for actuation, though desired to be incompressible, has some compressibility in practice. Entrainment of air in the fluid increases compressibility effect by reducing the effective bulk modulus. Reduced bulk modulus makes position control difficult. The paper studies the effect of effective …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 2, 2016 · pp. 25–35 Read article
-
Comparison of Tuning Methods of PID Controllers of Two Conical Tank System of Interacting Type
Abstract: The rapid increasing complexity of modern control systems has accentuated the idea of applying new modern approaches in order to solve design problems for various control engineering applications. This paper deals with the tuning of PID controllers for complex nonlinear process of two interacting Conical Tank Systems. Conical tanks play vital role in leaching extractions in pharmaceutical and chemical industries, as well as in food processing industry. It is a …
Published in Journal of Control & Instrumentation · Vol. 5, Issue 3, 2014 · pp. 8–14 Read article
-
Auto Tuning of PI Controller using Fuzzy Logic for the Spherical Tank System and its Real Time Implementation
Abstract: In this paper, Auto Tuning of PI controller using fuzzy logic is developed to improve the performance of the spherical tank process. A real time implementation of proposed controller for a spherical tank to control liquid level is studied. Control of liquid level in a spherical tank is highly non linear due to variation in the area of cross section of level system with change in shape. System identification of …
Published in Journal of Control & Instrumentation · Vol. 5, Issue 3, 2014 · pp. 28–37 Read article
-
Arduino Based Temperature Control with PID Controller as Overheat Protector
Abstract: This paper describes a proportional, integral, derivative (PID) temperature controller for overheat protection that is Arduino-based. To regulate and prevent the temperature from rising above a certain threshold, it includes an Arduino UNO board, LM35 temperature sensor, relay, and cooling fan. The system collects temperature readings from the LM35 and delivers them to the Arduino UNO, which processes the data and regulates the output to the relay using a PID …
Published in Journal of Instrumentation Technology & Innovations · Vol. 13, Issue 1, 2023 · pp. 23–28 Read article
-
Design of PID Controller using PSO Algorithm for PFR System
Abstract: AbstractThe paper presents to design Proportional-Integral Derivative (PID) controller parameters for PFR system using Particle Swarm Optimization (PSO) Algorithm. The design goal is to minimize the optimal parameters of the integral errors and reduce transient response by minimizing overshoot, settling time and rise time of step response. First an objective function is defined, and then by minimizing the objective functions using PSO Algorithm. The PFR system is very important equipment …
Published in Current Trends in Signal Processing · Vol. 8, Issue 3, 2018 · pp. 24–28 Read article
-
Direct Torque Control Based on Discrete-Time PI Controller of an SVPWM Inverter Fed Induction Motor Using Energy Model
Abstract: A direct torque control (DTC) of an induction motor (IM) with constant switching frequency has been presented in this work which is performed using space-vector modulation (SVM). The developed DTC scheme is based on the discrete-time PI controller strategy and this has been used to achieve direct control of torque of IM. To design the discrete-time PI (DTPI) controller the energy model of induction motor is simplified at the beginning …
Published in Journal of Power Electronics and Power Systems · Vol. 2, Issue 2, 2012 · pp. 45–55 Read article
-
Performance Analysis & Speed Control of 3 Phase Induction Motor on 8 Bit Controller Platforms Using LabVIEW®
Abstract: ABSTRACTPerformance analysis & speed control of 3 phase induction motor on 8 bit platform using LabVIEW® aims to speed control of 3-phase induction motor, microcontroller used for this work is AVR ATmega16. LabVIEW® provides the remote GUI interface to the system. LabVIEW® interfaces to the control system with the RS-232 communication link Using NI-VISA. Actually induction motor controlling through microcontroller and PC based GUI leads to the almost complete design …
Published in Journal of Computer Technology & Applications · Vol. 1, Issue 1-3, 2011 · pp. 88–99 Read article
-
Comparative Analysis of P, PI, and PID Controllers Based on Time Domain Specifications
Abstract: In this research, proportional (P), proportional-integral (PI), and proportional-integral-derivative (PID) controllers utilized in control systems are thoroughly compared. The study attentions on assessing system presentation with time-domain specifications such as rise time, settling time, overshoot, and steady-state error. Mathematical modeling and controller design are discussed, shadowed by analytical comparison. The results establish that while P and PI controllers offer simplicity, PID controllers provide superior performance in terms of stability and …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Design of Differential Evolution Optimized PI Controller for a Temperature Process
Abstract: Differential evolution is a new stochastic population-based optimization algorithm. It is an accurate, fast and robust optimization method. In this paper, a PI controller is used and differential evolution optimization technique is used to optimize the controller parameters. The robust controller parameters are obtained by solving the optimization problem, which consists of objective functions and constraints, using differential evolution method. Here differential evolution is implemented in tuning of a PI …
Published in Journal of Control & Instrumentation · Vol. 3, Issue 1-3, 2012 · pp. 17–26 Read article