Search
43 articles for “Non-Uniform”
-
Comparative Study of Uniform and Non-Uniform Beams Resting on Bi-Parametric Foundation Under Harmonic Load with Time Dependent Boundary Conditions
Abstract: In this study, we investigated uniform and non-uniform damped and time-dependent elastic beams resting on bi-parametric foundation subjected to harmonically varying moving load. The beam properties, including moment of inertia and mass per unit length, were assumed to be either constant or varying with position along the beam span in this study. The solution methods were based on Mindlin-Goodman method, Fourier sine transformation, weighted residual method, integral transformation, and theory …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 33–50 Read article
-
Electromagnetic Transients in Strongly Non-Uniform Overhead High Voltage Lines
Abstract: This paper addresses the electromagnetic transients in high strongly non-uniform overhead voltage lines. For their simulation, a novel Laplace-domain approach has been introduced. The voltage and current patterns in terms of location and complex frequency are determined by a set of simultaneous algebraic and partial differential equations. To solve them numerically, an effective Mathematica code is proposed. By contrasting the outcomes of their application to multiple case studies with those …
Published in Journal of Power Electronics and Power Systems · Vol. 15, Issue 1, 2025 · pp. 30–36 Read article
-
Flexural Vibration of Non-Uniform Beam on Bi-Parametric Foundation Under Harmonic Moving Load with Non-Classical Boundary Conditions
Abstract: The dynamic response to harmonically varying moving loads of non-uniform elastic beam resting on bi-parametric foundation with non-classical boundary condition, time dependent in particular is examined in this paper. Here, the beam is considered non-uniform, with the moment of inertia and the distributed mass varying continuously along the span L as functions of the position 𝑥. In order to guarantee a more stable structure and a reduce risk of resonance, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
Time and Frequency Response of Non-uniform Overhead Lines Under Corona
Abstract: This study presents an efficient and direct technique for determining both the time and frequency responses of non-uniform overhead power transmission lines operating under corona conditions. The assumed-line's non-uniformity is due to the conductors’ sag. Expressions will be presented for the location-dependent line surge impedance and the unevenly distributed lines’ electrical parameters. The analysis starts with solving the relevant system of differential and algebraic equations, subject to the boundary conditions. …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 25–33 Read article
-
Direct Determination of the Frequency-Dependent Transmission Constants of Non-Uniform Two-Port Networks
Abstract: Due to space constraints and the expansion of electricity networks, transmission lines that cross close to one another are now commonplace. Power networks also commonly install higher operational voltage lines that share transmission corridors with lower voltage lines. Overhead transmission lines are the primary method for transmitting electrical energy across vast distances. This paper presents an efficient and direct technique for identifying the four frequency-dependent ABCD transmission constants of arbitrary …
Published in Journal of Power Electronics and Power Systems · Vol. 14, Issue 3, 2024 · pp. 1–8 Read article
-
Electromagnetic Transients in Compensated Overhead Lines with Multiple Tower Spans
Abstract: This paper addresses the analysis of the electromagnetic transients developed in an important class of non-uniform high-voltage power lines. It deals particularly with compensated long overhead high- voltage transmission lines composed of several tower spans, which are connected in cascade. The derived mathematical model leads to a system composed of simultaneous partial differential and algebraic equations, which can be solved numerically in terms of parametric functions using the software Mathematica’s …
Published in Trends in Electrical Engineering · Vol. 15, Issue 2, 2025 · pp. 1–9 Read article
-
Analyzing The Electromagnetic Transients and Corona Performance of Long Overhead Lines with Multiple Tower Spans
Abstract: This paper addresses the simulation of the electromagnetic transients developed in an important class of non-uniform high voltage power lines. The resulting information is of paramount importance for the proper planning, design, operation and protection of electric power networks. It deals particularly with long overhead high voltage transmission lines composed of several tower spans which are connected in cascade. The presented approach considers eventually existing localized corona discharges at some …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 1, 2025 · pp. 35–44 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
A Novel and Efficient Transmission System for Harnessing Hydrokinetic Power from Ocean Currents
Abstract: This paper presents the design principles of a novel power transmission system for an indigenous device known as a “Hydro Vortex Power Generator” that harnesses the power of vortices from low-velocity streams of water. The flow-induced motions of an elastically mounted cylinder that is free to oscillate in the crossflow direction are converted to electricity by the power generator. To convert the oscillations with non-uniform amplitude and frequency to uniform …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 3, 2024 · pp. 14–24 Read article
-
Geometrical, Numerical and Materialistic Parameters used for Studying and Reducing Tube-Side Flow Inconsistency in Tube and Shell Heat Exchangers: An Overview
Abstract: A Shell and Tube Heat Exchanger (STHE) exchanges heat between two fluids flowing at different temperatures. More than 60% of the market is occupied by STHE’s out of all the different kinds of heat exchangers. Maldistribution is the uneven fluid flow distribution in the tubes of the STHE. The aim of this study is to provide a detailed review on the various methods used by researchers for reducing the maldistribution …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 603–621 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Firefly Algorithm–Based Optimization of Processing Parameters for Enhanced Performance of Polymer Composite Materials
Abstract: Polymer composite materials are extensively used in aerospace, automotive, and oil & gas applications due to their high strength-to-weight ratio and design flexibility. However, achieving optimal mechanical and thermal performance strongly depends on precise control of processing parameters such as curing temperature, energy consumption, and material utilization. Conventional trial-and-error approaches often lead to excessive energy usage, non-uniform curing, and sub-optimal composite properties. To address these challenges, this paper proposes an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 90–107 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
A Review of Computational Methods for Image Restoration and Noise Reduction Using Reference Images
Abstract: Digital imaging systems play a vital role in numerous application domains, including consumer photography, biomedical imaging, remote sensing, aerial surveillance, and astronomical observation. Despite continuous advancements in imaging hardware and software, the visual data acquired by these systems often suffer from degradation caused by spatially non-uniform blur. This blur may arise due to several factors, such as lens imperfections, atmospheric turbulence, sensor limitations, motion between the camera and the scene, …
Published in Journal of Multimedia Technology & Recent Advancements · Vol. 13, Issue 1, 2026 · pp. 23–30 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Dissipative Particle Dynamics Simulation Study on the Evolution of Photoinitiated Free Radical Polymerization Crosslinked Networks
Abstract: Gradient polymer materials overcome the limitations of conventional homogeneous polymers by integrating multiple distinct functionalities within a single continuous structure. Although photoinitiated free-radical polymerization offers excellent spatial and temporal control, the underlying microscopic mechanisms governing network evolution under non-uniform light fields remain poorly understood. In this study, a mesoscale dissipative particle dynamics (DPD) model was successfully developed to couple free-radical polymerization kinetics—including initiation, propagation, crosslinking, and termination—with exponential light attenuation …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 142–158 Read article
-
Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites with Embedded Memristive Energy Routing for Adaptive Solar Energy Harvesting
Abstract: This dynamic and fast-growing intelligent renewable energy system requires photovoltaic materials that can autonomously adapt to fast-changing environmental conditions. In this study, a novel system is proposed for adaptive harvesting of solar energy based on Neuromorphic Self-Learning Polymer–MXene Photovoltaic Composites (NSPMPCs) with embedded memristive energy routing networks. To boost the charge generation and charge transport in the polymer–MXene heterostructure, the flexibility and processability of conductive polymers are integrated with the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Analysis of Thermoelectric Generator for Automotive Exhaust Energy Recovery
Abstract: Utilizing waste heat from thermodynamic systems has shown to be a successful tactic for reducing environmental emissions and improving overall energy efficiency. About 40% of the chemical energy generated during fuel combustion is rejected by exhaust gases in internal combustion engines. It is possible to increase vehicle fuel efficiency and lower greenhouse gas emissions by harvesting this otherwise lost heat energy and turning it into useable electrical power. A viable …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Properties of Biodegradable Films based on Pectin, Mango Kernel Flour and Unrefined Palm Oil
Abstract: This study allowed to develop biodegradable films based on pectin, incorporating mango kernel flour and unrefined palm oil, whose physical and mechanical properties were investigated. Results highlighted the feasibility of developing of these composite films. The film properties showed variability in color, physical, barrier and mechanical properties, depending to concentration of ingredients. Biodegradable films obtained are homogeneous, non-cracked, uniform, and color is mainly orange. Opacity of films increased with the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 52–62 Read article
-
Advancing Capsule Technology: A Comprehensive Review of Formulation Strategies
Abstract: Capsules are a popular and versatile oral dosage form used in drug delivery, offering benefits such as ease of swallowing, taste masking, and improved stability of active pharmaceutical ingredients (APIs). They can be made from gelatin or non-gelatin materials like Hydroxypropyl Methylcellulose (HPMC), Polyvinyl Alcohol (PVA), and starch, catering to dietary, cultural, and sustainability needs. Capsules can be engineered for controlled, sustained, or targeted release, enhancing bioavailability, particularly for poorly …
Published in International Journal of Antibiotics · Vol. 2, Issue 1, 2025 · pp. 44–56 Read article