Search
222 articles for “Nano-reinforcement”
-
Recent Advancements and Layering Techniques in Nanoparticle-Reinforced Hybrid Composites: A Comprehensive Analysis
Abstract: This review examines the advancements in nanoparticle-reinforced fiber composites, focusing on natural fibers, synthetic fibers, hybrid composites, and fiber metal laminates (FMLs). Nanoparticles such as SiO₂, TiO₂, Al₂O₃, and graphene, introduced at 0.5–3% volume, have significantly enhanced mechanical, thermal, and wear properties. Comparative studies reveal that hybrid composites reinforced with 1–2% nanoparticles show a 20-30% increase in tensile strength and a 15-25% improvement in thermal stability compared to non-reinforced composites. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 83–89 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Dynamic Vibration and Damping Analysis of Sustainable Nano-Reinforced Polymer Composite Elements for Vehicle Suspension Applications
Abstract: This paper presents an analytical investigation into the dynamic vibration characteristics of nano-reinforced polymer composite elements intended for vehicle suspension applications. A single-degree-of-freedom (SDOF) quarter-car model is employed to derive fundamental expressions for natural frequency, damping ratio, logarithmic decrement, and displacement transmissibility. The primary contribution lies in establishing explicit analytical linkages between material-level viscoelastic properties specifically storage modulus and loss modulus and system-level suspension parameters including stiffness and damping coefficients. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 561–570 Read article
-
Dielectric Behaviour of Nanosilver and Silver-CNT Hybrid Reinforced Nanocomposites
Abstract: The present study concerns study of the dielectric properties of Ag-CNT vis-à-vis Ag reinforced unsaturated polyester matrix composites. The Ag-CNT hybrid was prepared by mechanical milling. Variation of the dielectric properties has been attributed to the morphological features and the degree of dispersion of the fillers. It has been found that dispersion of Ag-CNT hybrid particle is beneficial for improvement of the dielectric properties.
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 22, Issue 2, 2020 · pp. 30–36 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
A Review on the Fabrication Techniques of Carbon Nanotube Reinforced Aluminium Metal Matrix Composites
Abstract: AbstractThe recent trend towards the use of composites is increasing in the ongoing research and islikely to continue rapidly in the future. Nowadays, aluminium (Al) and aluminium alloy basedcomposites are gaining importance in the upcoming fields of engineering. Metal matrixcomposites (MMC`s) with carbon nanotubes (CNTs) reinforcements give superior mechanicaland physical properties. Aluminium Metal Matrix Composites (AMMC`s), sought over otherconventional materials in the field of automobile, aerospace, defense, sports, electronics, biomedicaland …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 7, Issue 2, 2017 · pp. 1–6 Read article
-
Nanoparticle Reinforced Base Material Thermal Properties Using Numerical Model: A Review Paper
Abstract: Present paper deals with the review of the analysis of base materials thermal properties. Nanoparticles are reinforced into the base material to analyse their thermal properties using different numerical models. Mixture rule and Maxwell model are considered to analyse the thermal properties of Al6061/Al7075 base material thermal properties reinforced with silicon carbide, aluminium oxide and copper nanoparticles. From the analysis, it has been found that addition of the nanoparticles into …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 9–11 Read article
-
Fabrication, Interfacial Characterization, and Superparamagnetic Properties of Fe₃O₄@γ-Fe₂O₃ Core/Shell Nanoparticle-Reinforced Chitosan Biopolymer Composites
Abstract: Magnetite/maghemite core/shell nanoparticles were prepared by alkaline co-precipitation of Fe(II) and Fe(III) precursors followed by controlled thermal oxidation at 350 °C and subsequently incorporated into chitosan at 1, 3, and 5 wt% loadings by solution casting. The resulting films were evaluated by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), high-resolution transmission electron microscopy (HR-TEM), vibrating-sample magnetometry (VSM), thermogravimetric analysis (TGA), and tensile testing. XRD showed the characteristic cubic spinel reflections …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigation of Microstructural and Tensile behaviour of stir-casted Al5052-based Composites with nano-reinforcements
Abstract: Aluminium-based composites have gained popularity in the aviation, automotive, and marine sectors as a result of their exceptional strength-to-weight ratio and also due to resistance to wear and corrosion. The current investigation involves the examination of the microstructural and tensile behaviour of stir-casted Al5052-based composites. The nanoparticles of 1% titanium diboride and 1% zirconia were added as reinforcement materials. To better understand the microstructure of the composite specimens, scanning electron …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 1–7 Read article
-
The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites
Abstract: AbstractThe present work is to investigate the thermal, electrical and dry sliding wear behaviour of a aluminium matrix composite reinforced with dissimilar particle size (≤ 200 nm and 2 μm) of titanium carbide particles. An aluminium matrix composite with 0, 5, 10 and 15 vol.% TiC reinforcement was prepared by using powder metallurgy. A pin-on-disc apparatus was broadly used to investigate the wear behaviour of the Al/TiC nano composites. Wear …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 19, Issue 2, 2017 · pp. 28–41 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
Characterization of Nano-Clay Reinforced Polymer Composites: Enhancing Performance for Extreme Applications
Abstract: This study investigates the mechanical, thermal, water absorption, and chemical resistance properties of nano-clay-reinforced polymer composites and polymer concrete. The incorporation of 1-5 wt% nano-clay resulted in a significant enhancement across all properties. Mechanical testing revealed a 42.86% increase in tensile strength (35 MPa to 50 MPa), 40% improvement in flexural strength (50 MPa to 70 MPa), and 46.67% rise in compressive strength (75 MPa to 110 MPa), attributed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 105–114 Read article
-
AI-Optimized Nano-Silica Reinforced PCM Composites for Predictive Solar-Thermal Energy Storage Networks
Abstract: This study presents an AI-optimized nano-silica reinforced polymer composite phase change material (PCM) for predictive solar-thermal energy storage networks. The proposed composite combines paraffin wax, high-density polyethylene (HDPE), and uniformly dispersed nano-silica particles to improve thermal conductivity, structural stability, leakage resistance, and long-term cycling performance. The composite was fabricated through melt blending and ultrasonication-assisted nanoparticle dispersion, followed by comprehensive morphological, chemical, thermal, and thermophysical characterization using scanning electron microscopy (SEM), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Effect of Functionalization on glass transition temperature of Carbon Fiber reinforced Epoxy Nanocomposites using MD Simulation
Abstract: As we all know that the mechanical characterization of any material plays a vital role in performance of the material throughout its life cycle. One of the major parameters in calculating the mechanical properties of carbon fiber reinforced nanocomposite is glass temperature. Understanding glass transition behaviour of polymer nanocomposites are crucial for optimizing their mechanical properties and performance. We used “Molecular dynamics simulations” to calculate sequel functionalization effect on glass …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 1–8 Read article
-
Investigating The Synergistic Effects of Micro and Nano Particle Reinforcements in Powder Metallurgy-Processed Aluminum Metal Matrix Composites for Enhanced Mechanical Performance
Abstract: The ever-growing demands of modern mechanical applications necessitate the development of materials with superior mechanical properties. In this research, we delve into the creation and evaluation of Aluminum Metal Matrix Composites (Al MMCs) made via the powder metallurgy route, reinforced with both micro and Nano-scale particles. The key aim is to investigate the possible cooperative effects of this dual reinforcement approach on the mechanical behavior of the composite. Traditional aluminum …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 220–229 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Mechanical and Morphological Characterization of Halloysite Nanotube (HNT) Reinforced Urethane Dimethacrylate (UDMA) Dental Composites
Abstract: Dental resin composites are widely used in restorative dentistry because of their excellent aesthetics, conservative cavity preparation, and satisfactory mechanical properties. However, their long-term clinical performance is limited by polymerization shrinkage, wear, microcrack formation, water absorption, and degradation in the oral environment. This study investigates the mechanical and morphological characteristics of Halloysite Nanotube (HNT)-reinforced Urethane Dimethacrylate (UDMA) dental composites to enhance the structural performance and durability of restorative materials. UDMA-based …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical Properties of MWCNT Reinforced Aluminium Nano Composites Synthesized Through Powder Metallurgy
Abstract: Multi-wall carbon nanotubes (MWCNTs) reinforced aluminium nano composites were synthesized using powder metallurgy technique and then cold extruded as secondary process. CNTs were added by 0.5wt%, 1wt%, 1.5wt% with aluminium powders and ball milled to obtain homogeneous mixture. The effects of carbon nano tubes (CNTs) on the mechanical properties of Al were investigated. The effect of mixing through ball milling, sintering temperature and extrusion process on the microstructure is explored. …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 2, Issue 1, 2012 · pp. 1–5 Read article
-
Development and Thermal-Soiling Performance Evaluation of Boron-Nitride Reinforced Polymer Nanocomposite Coatings for Solar Photovoltaic Applications
Abstract: Surface heating, dust buildup, and weakening triggered by ultraviolet (UV) light all have a vast effect on the long-term performance of solar photovoltaic (PV) modules. These issues all lower power conversion efficiency in real-world open-air circumstances. A nanocomposite coating built on fluoropolymer (FEP) that is reinforced with hexagonal boron nitride (h-BN) nanoparticles is invented by this study to enhance thermal dissipation, optical transmission, and resistance to dirt at the same …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 218–223 Read article