Search
40 articles for “Microstrip feed”
-
A Hexagonal Sierpinski Gasket Antenna with a Microstrip Feed Line and a Stub for UWB Applications
Abstract: In this paper a Sierpinski gasket hexagonal antenna is proposed with a feed line having a stub attached to it. Three iterations of the proposed antenna geometry were done and with this improved feeding technique for four resonant bands of operation from 2.86 to 3.3 GHz, 3.758–4.313 GHz, 7.514–8.5468 GHz and 12.352–10.976 GHz were obtained. The antenna is suitable for ultra wideband (UWB) and radiolocation applications. The proposed antenna was …
Published in Journal of Electronic Design Technology · Vol. 6, Issue 1, 2015 · pp. 14–18 Read article
-
Two Port Ring Shaped DRA Based MIMO (Multiple Input Multiple Output) Antenna for WLAN Application
Abstract: This paper presents multiple input and multiple output (MIMO) antenna which is based on dielectric resonator with very good isolation. This antenna consists of two hybrid resonator and is fed by microstrip feedline through H-Shaped aperture is cut in ground plane just below the Ring DR. Area of this antenna is 40x50 mm². Impedance bandwidth (S11<-10dB) of this antenna is 5.15 to 6.15 GHz. The radiation efficiency and total gain …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 7, Issue 1, 2019 · pp. 17–24 Read article
-
A Review on Parasitically Coupled and a Direct Coupled Feed for a Microstrip Antenna Array
Abstract: Due to modern electronics, small size electronic systems have been increasing in integrated circuits and the physical size of systems is reduced. Hence, demand of small and low cost antennas has increased. Microstrip or patch antenna provides the lightweight, not expensive, and integration is easy. Microstrip antennas or patch antennas are one of the most attractive antennas for integrated systems and are widely used in wireless communication systems. This paper …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 1, 2018 · pp. 15–18 Read article
-
A Compact Umbrella Shaped Patch Antenna using DGS for Dual/Triple/Quad Band Applications
Abstract: In this paper, a compact Umbrella shaped microstrip patch antenna for Quad band applications specially for X band, Ku band and K band applications is presented. The antenna is simulated using the Ansys soft HFSS simulator. The size of the antenna is 25 mm×25 mm ×1 mm and printed on an FR4 substrate. Defected ground structure in the form of concentric circular rings is used to increase the bandwidth of …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 3, 2015 · pp. 36–44 Read article
-
Wideband Ring Dielectric Resonator Antenna Using C Shaped Parasitic Elements
Abstract: Abstract: This paper presents a Ring Dielectric Resonator Antenna for wideband applications. Ring DRA is excited by annular shaped microstrip feedline. Bandwidth enhancement is achieved by adding the C-shaped parasitic elements on both sides of ring dielectric resonator antenna and removing the central part of a cylindrical DRA to form ring DRA. The operating frequency of proposed DRA lies between 2.054–6.5 GHz. Gain and Radiation efficiency of this proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 32–37 Read article
-
A Review on Quad Band Microstrip Antenna for GSM and GNSS Application
Abstract: Micropstrip or patch antennas are also known as a printed antenna fabricated on printed circuit board (PCB). Microstrip antennas are low cost, have a low profile, low weight and are easily fabricated [1]. They are used atmicrowave frequencies. In this review paper, a survey on quad band operations in patch antenna papers, which have been used by authors for designing of low profile, small compatible patch antenna, have been presented. …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Low profile L5 and S band Microstrip antenna for IRNSS Application Using Coxial Feed
Abstract: In recent aura, navigation is one the most demanding technology. To increase coverage, gain and bandwidth are more important of any wireless communication systems India has developed its own navigational system called IRNSS which work one two frequency band one is L5 (1.176 GHz) and second one is S band (2.482-2.502 GHz) In this paper we proposed 2 different antenna one for L5 band and second for S band antenna …
Published in Journal of Communication Engineering & Systems · Vol. 8, Issue 3, 2018 · pp. 7–17 Read article
-
Design and Analysis of Dual Band Triangular Slotted Microstrip Patch Antenna for GPS and WLAN Application
Abstract: AbstractIn this paper, design of a dual operated microstrip patch antenna is presents. The dual-operation frequencies are chosen for UMTS/GPS and WLAN bands. A microstrip square patch antenna is designed which is excited by a microstrip line feed from the bottom of the antenna. An epoxy glass FR4 material is used as a substrate in the designing of antenna. The antenna is first modified in inverted U-shaped design to operate …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 2, 2019 · pp. 1–5 Read article
-
Effect of Partial Ground Plane on the Microstrip Patch Antenna Performance for Wireless Sensor Networks
Abstract: Wireless sensor networks have a number of tiny nodes. Each node has the ability to communicate with its neighbors. The communication range depends on the type of antenna used. This paper analyzes the performance of microstrip patch antenna which suppresses the surface waves from the edges of the ground-plane of the substrate. The microstrip patch antenna is designed using a substrate of dielectric constant εr = 2.2 and loss tangent …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 3, 2013 · pp. 5–9 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
A Strip Feed Compact UWB Antenna with Triple Band Notched
Abstract: In this paper, a microstrip feed Ultrawide Band (UWB) antenna with triple notch band characteristic has been proposed. The proposed antenna has U-shaped stub on the radiating patch. The proposed antenna reduces the interference between UWB and WiMAX/WLAN/ITU. The propose antenna has a compact size of 26 x 27 mm2. The proposed antenna achieved an operating bandwidth (VSWR<2) from 2.68 to 12 GHz except notch band 3-3.85 GHz (WiMAX), 5-5.9 …
Published in Current Trends in Signal Processing · Vol. 7, Issue 1, 2017 · pp. 1–7 Read article
-
A Strip Feed Compact UWB Antenna with Triple Band Notched
Abstract: In this paper, a microstrip feed Ultrawide Band (UWB) antenna with triple notch band characteristic has been proposed. The proposed antenna has U-shaped stub on the radiating patch. The proposed antenna reduces the interference between UWB and WiMAX/WLAN/ITU. The propose antenna has a compact size of 26 x 27 mm2. The proposed antenna achieved an operating bandwidth (VSWR<2) from 2.68 to 12 GHz except notch band 3-3.85 GHz (WiMAX), 5-5.9 …
Published in Current Trends in Signal Processing · Vol. 7, Issue 1, 2017 Read article
-
Circularly Polarized Microstrip Fed Antenna for Dual Frequency
Abstract: Abstract: The presented antenna is designed for achieving dual frequency characterized circularly polarized behavior. The achievement of dual frequency is done by coupling of the microstrip feed line arrangement with the annular slot shaped with four unequal arms type of slot structure on the patch. The Reflection coefficient, pattern of radiation of the antenna and the Axial ratio are simulated. The impedance bandwidths obtained for lower of (RHCP) is 25% …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 1–5 Read article
-
Circularly Polarized Compact Wide Slot Microstrip-Fed Antenna for Wideband Applications
Abstract: Abstract: This paper presents a circularly polarized (CP) compact wide slot microstrip–fed antenna for wideband applications. Inverted L-shape protruding stub from the ground plane towards the center of slot permits to obtain AR <3dB. Wide slot fed with an offset microstrip feedline at an offset distance d, beneath the protruded stub. Proposed CP wide slot (WS) antenna is designed with compact size of 25 mm x 25 mm. Simulated results …
Published in Journal of Microwave Engineering and Technologies · Vol. 6, Issue 1, 2019 · pp. 6–12 Read article
-
Performance Analysis of Rectangular Patch Antenna with EBG using Quarter Wave Feed Line and Coaxial Feed Line Methods for C-Band Radar Based Applications
Abstract: Microstrip antenna has various attractive features like light weight, low cost, easy fabrication, etc. Microstrip antenna can be fed in a variety of ways. This paper is focused on the enhancement of gain of the rectangular patch antenna with electromagnetic band gap structures at 7.5 GHZ for two different feeds and compares their results. The two types of feeds are coaxial line feed and quarter wave feed. Antenna design has …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 19–25 Read article
-
CPW feed Flexible Antenna for Wireless Applications
Abstract: Flexible Microstrip CPW Feed Antenna using flexible FR-4 substrate is analyzed and presented over here. The Copper is used as conductive material for patch and CPW feed respectively. The performance in terms of return loss, gain, VSWR and radiation pattern is evaluated. The impedance bandwidth and gain of flexible antenna is 20.25% (2.179 GHz-2.665 GHz), 21.44% (3.232 GHz-4.026 GHz) and 1.4 dBi, 0.009 dBi respectively. The flexible property of the …
Published in Research & Reviews: A Journal of Embedded System & Applications · Vol. 6, Issue 3, 2018 · pp. 18–24 Read article
-
Split Ring Resonator Based Dual Frequency Microstrip Patch Antenna For Wireless Applications
Abstract: The objective of the work is to design a compact dual frequency microstrip antenna (MSA) at GSM 1800 MHz and ISM (2.4 GHz). The proposed MSA incorporates a rectangular patch with an inverted U slot printed on the top of RT duroid 5880 substrate with thickness of 0.8mm and dielectric constant of 2.2. The dimensions of the patch are optimized as 45x 54 mm2. It is fed by coaxial feeding. …
Published in Journal of Microwave Engineering and Technologies · Vol. 9, Issue 2, 2022 · pp. 1–14 Read article
-
Design and Simulation of Triple Band Microstrip Patch Antenna for Ku-band, K-band and Ka-band Applications
Abstract: AbstractThis paper represents a microstrip patch antenna for future 5G-communication technology. The proposed antenna designs are simulated and their performances are analyzed for different parameters like lower return losses, higher gain, voltage standing wave ratio (VSWR), current distribution, far field radiation and wide bandwidth performance for the tri-frequency band operation in Ku band (12–18 GHz),K-band (18–27 GHz) and Ka-band (27–40 GHz) as per the specified IEEE standard. The proposed antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 7, Issue 1, 2020 · pp. 26–33 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
A Dipole Circular Patch Antenna for Operation in the X-Band
Abstract: This microwave engineering research paper proposes, designs, calculates, and simulates a novel dipole circular patch antenna for theoretical wideband operations in the X-band (the 8 GHz to 12 GHz frequency range). This proposed microstrip patch antenna was realized using FR-4 as a dielectric (a thickness of 1.5 mm) with copper being used in both the ground plate and the two transmitting circular elements (the so-called patches with a thickness of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 2, 2021 · pp. 1–8 Read article