Search
24 articles for “MWCNT”
-
Multifunctional Lignin-Modified Jute/Bio-Epoxy Composites with MWCNT-Based Piezoresistive Self-Sensing for Sustainable Housing Applications
Abstract: This study develops a multifunctional natural-fibre-reinforced polymer composite based on alkali-treated jute fabric, bio-based epoxy, kraft lignin and a small amount of multiwalled carbon nanotubes (MWCNTs), with particular emphasis on polymer-matrix modification, fibre–matrix interfacial behaviour and intrinsic damage sensing. Kraft lignin was incorporated at 0, 2, 4 and 6 wt.% to examine its influence on polymer-chain mobility, interfacial morphology, thermal stability and mechanical response, while 0.5 wt.% MWCNTs was introduced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
An Aggregate-Breakage Percolation Model and ANN-Based Internal Validation for Curvature-Dependent Electrical Conductivity of MWCNT/TPU Nanocomposites
Abstract: Strain-dependent percolation models are mostly built and tested for uniaxial tension, yet many flexible sensors and stretchable devices work mainly in bending, where the outer fibre is stretched, the inner fibre is compressed and the strain changes with thickness. This study extends an aggregate-breakage percolation model, originally formulated for uniaxial strain, to through-thickness bending of a multi-walled carbon nanotube/thermoplastic polyurethane (MWCNT/TPU) nanocomposite. The local strain is taken as ε(y) = …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Wear Attribute of Aluminium Metal Matrix Composite Reinforced With MWCNT, Produced By FSP, On A Vertical Milling Machine
Abstract: The exceptional properties of Aluminium metal matrix composites (AMMCs) like good hardness, specific strength, enhanced wear rate made huge demand in the automobile and aerospace industries. The classical methods of manufacturing AMMCs leave problems at the interface of matrix and reinforcement segregation, like an agglomeration of reinforcements, wettability etc. To overcome this, an alternate, innovative method of fabricating aluminium matrix surface composites has been invented, which is termed friction stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 525–539 Read article
-
Characterization of Glass Fiber/Epoxy Laminates Modified with MWCNT–Al₂O₃ Hybrid Nanofillers
Abstract: Enhancing the performance of fibre-reinforced polymer composites increasingly involves the integration of nanoscale additives that can improve strength, toughness, and overall durability. In the present investigation, woven E-glass/epoxy laminates were modified using a hybrid nanofiller system consisting of multi-walled carbon nanotubes (MWCNTs) and aluminium oxide (Al₂O₃) nanoparticles. The two nanomaterials were combined in a 2:4 proportion and introduced into the epoxy matrix at total loadings of 1%, 3%, and 5% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 350–368 Read article
-
Enhancement of Dielectric Properties of PVDF Composites with MWCNT and GCNF Fillers
Abstract: The paper discusses the role of multiwalled carbon nanotube (MWCNT) and graphitized carbon nanofibre (GCNF) in Polyvinylidene fluoride (PVDF) composites prepared by melt mixing method. Analytical studies were carried out using X-ray diffraction analysis (XRD) and Fourier transform infrared spectroscopy (FTIR) for understanding the role of fillers. Formation of β phase crystalline structure with a relative increase in β phase content is observed and is maximum at 5 wt.% of …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 43–52 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Effect of Multiwalled Carbon Nanotubes on Compressive Strength of Concrete
Abstract: The objective of the suggested study was to examine the possible application of multi-walled carbon nanotubes (MWCNTs) as nano reinforcement to improve concrete's compressive strength. Single-walled carbon tubes (SWCNTs) and multi-walled carbon tubes (MWCNTs) are two groups of cylindrical-shaped carbon allotropes known as carbon nanotubes (CNTs). Tests are carried out 7, 14, and 28 days after the MWCNTs are reinforced in M20 grade concrete at 0.02% and 0.025% (by weight …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 2, 2024 · pp. 01–08 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Advanced Polymer Composite Coating for Thermal Performance and EEE Improvement of a Solar Energy Harvesting System
Abstract: The integration of carbon-based nanomaterials with polymer matrices presents a promising route toward advancing solar energy harvesting technologies. In this study, nanoparticle-blended polymer composite coatings are examined to evaluate the performance of FPSC, utilizing an unconventional collector setup and a multiple-carbon-based nanoparticle-blended paint polymer. Nanomaterial provides a crucial alternative for enhancing their thermal efficiency. The research findings reveal that the deformation of nanomaterials improves the heat efficiency of solar collectors. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1197–1222 Read article
-
Experimental Exploration of Crack and Damage Dynamics of Hybrid FRP Nano Composites
Abstract: Fiber-reinforced polymer (FRP) composites have become essential materials in modern engineering structures because of their excellent strength-to-weight ratio, corrosion resistance, and adaptability in design. Among different fracture modes, Mode I interlaminar fracture where cracks propagate under tensile opening stresses is one of the most critical forms of damage in layered composites. Since delamination occurs within the matrix-rich regions between plies, improving the matrix properties plays a key role in enhancing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 220–232 Read article
-
Fabrication and Characterization of Zinc-based Alloy for Bio-implants
Abstract: Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical properties with Zinc. Implants, due to their intricate geometries are difficult to fabricate by conventional manufacturing techniques. Therefore, they are usually fabricated by Additive manufacturing and Powder metallurgy techniques. In the present work, Zinc, Magnesium, manganese and titanium are alloyed using powder metallurgy technique. Vickers micro-hardness, UTM, Zeiss microscopy and Corrosion testing using …
Published in Journal of Polymer & Composites · Vol. 11, Issue 7, 2023 · pp. 1–13 Read article
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Comparative Analysis of 3D-Printed and Molded Shape-Stabilized Phase Change Composites
Abstract: Thermal energy storage (TES) has become essential for efficiently storing and utilizing thermal energy across applications like industrial heating, power plants, batteries, medical devices, food preservation, and aerospace technology. Because of their high energy density, affordability, and environmental friendliness, phase change materials, or PCMs, are employed extensively. However, challenges like poor thermal conductivity and leakage limit their performance. To address these issues, 3D printing has emerged as a powerful tool …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 184–192 Read article
-
Solar-Responsive Photo-Thermal Polymer Composites with Carbon Nanostructures for On-Demand Water Purification
Abstract: The development of solar-responsive polymer nanocomposites offers a sustainable pathway for water purification. In this work, polyvinyl alcohol (PVA) films reinforced with graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) were fabricated and systematically investigated for their mechanical, thermal, viscoelastic, and thermal transport properties. Neat PVA displayed moderate tensile strength (~38 MPa) and high elongation (~165%), whereas 1.0 wt% nanofiller loading enhanced tensile strength to ~52 MPa and modulus to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 199–209 Read article
-
Evaluation of CI Engine Performance and Emissions Using WB10CNT90: A CNT-Reinforced Biodiesel Blend Approach and its Marketing Prospects for sustainable fuel Commercialization
Abstract: The experimental and analytical evaluation of the WB10CNT90 blend—a combination of 10% waste biodiesel derived from Madhuca longifolia, 90% conventional diesel, and 100 ppm Multi-Walled Carbon Nanotubes (MWCNTs)—demonstrates its potential as an efficient and eco-friendly alternative to conventional diesel. The Brake Thermal Efficiency (BTE) of the engine increased by approximately 15%, indicating enhanced energy conversion efficiency during combustion. Simultaneously, the Brake Specific Fuel Consumption (BSFC) showed a reduction of nearly …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 741–759 Read article