Search
14 articles for “Layered metal–polymer”
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Performance Improvement of Polymer and Silicon Solar Cells Using Transition Metal Oxide Interfaces
Abstract: Fossil fuels are running out, which is contributing to greenhouse gas emissions and climate change due to the world's growing energy demand. Renewable energy, which is environmentally friendly, is crucial for balancing the demand and supply of energy in our society.The non-traditional energy source with the fastest rate of growth is solar cells, which use photovoltaic technology to convert sunlight into electrical power.Conjugated polymers and large molecules are used in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 66–75 Read article
-
Machine Learning Framework for Optimizing Polymer–Metal Oxide Composites as Charge Selective Layers in Perovskite Solar Cells
Abstract: To achieve high-performance and stability of perovskite solar cells (PSCs), it was important to incorporate innovative interfacial materials to tune the balanced charge extraction, low recombination, and enhanced operational lifespan. On this note, polymer composites with metal oxides have been proposed as promising candidates as charge selective layers (CSLs), whereby they present a rare combination of tunable energy levels, improved film forming abilities, and better interface engineering capabilities. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1073–1098 Read article
-
Performance Analysis of GLARE Composites in Aerospace Engineering
Abstract: The fuel consumption of an aircraft is largely governed by its payload, which emphasizes the continuous demand for advanced lightweight structural materials to enhance the lift-to-weight ratio and improve overall fuel efficiency. Fiber Metal Laminates (FMLs) have emerged as a novel class of hybrid materials that combine alternating layers of thin metals with fiber-reinforced polymer composites, thereby offering mechanical properties superior to those of the individual constituents. Among the different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 771–779 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Fabrication of Low-Cost and High-Efficiency Crystalline Silicon Solar Cells Using Polymeric Carrier Selective Contacts
Abstract: Crystalline silicon (c-Si) solar cells are the leading choice in the photovoltaic market due to their dependability and long-term stability, but lowering production costs and increasing efficiency remain key issues. Organic semiconductors use carrier-selective contacts based on doped amorphous silicon layers and transition metal oxides to simplify and lower the production costs of efficient crystalline silicon solar cells. Polymers are rapidly being used in photovoltaics as flexible substrates, photoanode films, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 124–131 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Design and Development of Additive Manufacturing Machine
Abstract: Rapid prototyping, commonly referred to as 3D printing or additive manufacturing (AM), is the process of creating three-dimensional objects by layer-by-layer addition of material. It is very different from subtractive and conventional forming techniques. The goal of this special issue is to gather research and advancements in additive manufacturing (AM), with an emphasis on novel manufacturing techniques and substitute products and materials for feedstock. Although metal and polymer-based materials have …
Published in International Journal of Electrical Power and Machine Systems · Vol. 1, Issue 1, 2023 · pp. 1–7 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Hybrid Material Systems for Flexible Electronics Electro-Mechanical Performance and Future Prospects
Abstract: Flexible electronics are transforming the landscape of modern electronic systems, enabling devices that are lightweight, stretchable, and adaptable to complex surfaces. These technologies are particularly impactful in applications such as wearable health monitors, soft robotics, energy harvesting systems, and implantable biomedical devices. At the heart of this evolution are hybrid material systems—engineered composites that combine organic polymers and inorganic nanomaterials to achieve synergistic electro-mechanical properties. These materials address the limitations …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 1, 2025 · pp. 7–12 Read article
-
Advancements in Nanostructured Membranes for Gas Separation: A Comprehensive Review
Abstract: Gas separation is vital in petrochemical, pharmaceutical, and environmental industries, yet traditional methods like distillation and cryogenic separation are energy-intensive and inefficient. Nanostructured membranes present a promising alternative, utilizing nanomaterials such as titanium dioxide, silica, carbon nanotubes, zeolite, and metal-organic frameworks to enhance separation efficiency and selectivity while reducing energy consumption. These membranes fall into various categories: polymeric nanostructured membranes, including mixed matrix and thin-film composites; inorganic membranes, such as …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 31–36 Read article
-
Machine-Learning-Assisted Development of Polymer-Biochar Composite Adsorbents for the Removal of Heavy Metals from Gomti River Water
Abstract: Rapid urbanization, industrial discharge, and agricultural runoff pose a significant threat to freshwater sustainability and public health. Within these ecosystems, polymer pollutants—such as microplastics, nanoplastics, synthetic fibres, and additive residues—have emerged as persistent vectors capable of adsorbing and transporting toxic heavy metals. Because these polymeric contaminants dynamically interact with conventional aquatic parameters to alter pollutant mobility and ecological risk profiles, there is an urgent need to transition from passive environmental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 72–95 Read article