Search
15 articles for “IE3D (simulation software)”
-
Analysis of a Dual Band Stacked Patch Antenna with Multiple Notches
Abstract: This paper presents the design and analysis of compact dual band stacked microstrip patch antenna for various applications. The designed antenna structure represents the dual frequency band operation and it covers the S band, frequency applications such as Wi-Fi, surface ship radar, weather radar, broadcasting in the range from 2.31GHz to 3.77GHz frequency band, radar, satellite based digital audio radio service (DARS) communication and some communication satellites. The parameters of …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 23–28 Read article
-
Compact Microstrip Band-pass Filter Using Open-loop Square Shaped DGS
Abstract: This paper presents to implement a compact microstrip band-pass filter with open-loop square dumbbell-shaped defected ground structure (DGS). This filter is designed at 2.1 GHz center frequency. The prototype filter is with defected ground structure to provide higher order quasi-elliptic filtering and it reports the return loss of 39 dB with a 3 dB fractional bandwidth of 880 MHz. The bandwidth of the band-pass filter can be easily controlled by …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 1, 2013 · pp. 11–14 Read article
-
Microstrip Planar Broadband Yagi-Uda Antenna for X-Band Communication
Abstract: In this paper, a planar Yagi-Uda antenna based on classic Yagi-Uda dipole antenna is accessible which is very useful for microwave wireless applications. This antenna provides relatively high gain and more directive radiation pattern at X frequency band with proper impedance matching. This antenna has been developed at supporting dielectric constant of 4.4, supported substrate thickness of 1.6 mm and loss tangent of 0.02. The proposed antenna is completely compatible …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 60–63 Read article
-
E-Shaped Microstrip Patch Antenna for High Speed Wireless Local Area Network (WLAN) Applications
Abstract: A microstrip antenna consisting of E-shape radiating patch having low profile, probe-fed is designed and proposed for wireless local area networks (WLAN) applications. All countries use different WLAN, as the antennas available are not able to cover all the standards. This study aims to design a smallest antenna with better polarization covering all high speed WLAN standards ranging from 4.47 to 5.82 GHz. The patch antenna designed on low cost …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 1–5 Read article
-
Design and Analysis of I-Slotted Rectangular Microstrip Patch Antenna for Wireless Application
Abstract: AbstractThis paper presents a novel design of an I-slotted patch antenna with compact nature and the study of various antenna parameters. The antenna is fed by the inset-feeding technique. The proposed patch antenna is designed and simulated on IE3D simulation software (Zeland program manager 9.0). The main aim of the proposed work is to design a large-bandwidth antenna with compact size. The proposed microstrip antenna has a wide bandwidth covering …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 3, 2013 · pp. 36–40 Read article
-
Vector Arrow Shape Microstrip Antenna for WiMAX Application
Abstract: AbstractIn this paper dual band microstrip patch antenna is presented which is used for personal communication system and wireless local area network. The two bands which ranges are 1.721-2.031 GHz with bandwidth of 16.53% and 2.964-3.202 GHz with bandwidth of 7.72%. The glass epoxy material is used as a substrate to design anticipated antenna and simulated with IE3D Zeland software. The simulation results like reflection coefficient, VSWR and smith chart …
Published in Journal of Electronic Design Technology · Vol. 8, Issue 3, 2017 · pp. 30–33 Read article
-
Design of a Microstrip Patch Antenna with an Array of Circular SRR Using Left-Handed Metamaterial
Abstract: In this paper, the design of a patch antenna with a metamaterial composed of circular SRR is proposed. The proposed antenna design is fabricated on FR4 substrate and the experimental results obtained are in good agreement with the simulated results. By using the circular SRR structure the return loss of the conventional patch antenna has been improved from -11.5dB to -18.5dB. influence of metamaterial designed on another layer characteristics of …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 24–28 Read article
-
Development of Bandwidth Enhanced Microstrip Patch Antenna for UMTS Application
Abstract: In this article, a low-profile microstrip patch antenna for UMTS application is presented. A wideband coaxial probe-fed slotted microstrip patch antenna has been simulated on IE3D software to give a wide bandwidth of 31.34% and tested successfully. The simulated and measured results in terms of return loss show good agreement.
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 1, 2015 · pp. 14–20 Read article
-
Design and Implementation of Microstrip Line Fed Rectangular Patch Antenna
Abstract: AbstractThis paper presents a high-performance microstrip line fed rectangular patch antenna with resonance frequency of 2.75GHz. The antenna has been simulated using IE3D software as well as HFSS. The return loss of the patch antenna found to be 24dB through IE3D simulation tool. From the results obtained, it is clear that harmonics exists at 3.75GHz which successfully minimized by removing a part of microstrip conductor with dimensions in accordance to …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 1, 2020 · pp. 1–4 Read article
-
Analysis and Design of Microstrip Antenna for Applications in Energy Harvesting
Abstract: AbstractThis paper focuses on design and analysis of wide band antenna for the use of energy harvesting. The design parameter for achieving optimal operation of the antenna is also analyzed. The presented antenna design has been simulated by IE3D software which is suitable for wide band applications at resonant frequency 3.23 and 4.25 GHz.Keywords: Wireless communication, LC filter, RF power, Schottky diodeCite this ArticleHira Sultan, Neha Sen, Vinod Kumar Singh, …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
Rectenna Design with Defect Ground Structure at 2.16 GHz
Abstract: AbstractThis paper presents the rectenna design for Wireless Power Transmission. The design would receive and convert microwave of 2.16 GHz to DC. Proposed rectenna is a combination of microstrip patch antenna, followed by stepped impedance filter and then matching circuit and rectifier circuit. A low-pass filter (LPF) at the input port of the rectifying circuit is used to suppress the high order harmonics. The IE3D software is used for the …
Published in Journal of Communication Engineering & Systems · Vol. 3, Issue 1, 2013 · pp. 16–18 Read article
-
A Neural Network Approach to Study the Bandwidth of C-Shaped Microstrip Antenna
Abstract: This paper presents the use of artificial neural network for the estimation of frequency band and bandwidth of a line feed C-Shaped Microstrip patch antenna. The results obtained by using ANNs are compared with IE3D simulation and found quite satisfactory. The designed antenna operates in the frequency range (1.735 to 1.945 GHz). The antenna is designed using glass epoxy between the ground plane and patch and simulated on the Zeland …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 2, Issue 3, 2015 · pp. 24–30 Read article
-
Design of a Multiband Antenna with Rectangular and Circular Slots for 5G Mobile Technology
Abstract: AbstractThis paper presents a microstrip patch antenna for 5G mobile communication. Requests for mobile communication arise because of rapid growth in mobile users. So, users need more features like high data rate, good communication and reduced traffic on their mobile phones. These requirements can be met using 5G technology. 5G technology offers very high bandwidth, reduced latency, broadband spectrum, improved QoS and a better capacity. 5G operates from 24 GHz …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 2, 2020 · pp. 30–34 Read article
-
Compact Pseudo-interdigital Bandpass Filter for L-Frequency Band
Abstract: In this paper, a different kind of microstrip bandpass filter is presented which is small in size and easy in fabrication. This microstrip filter is pseudo-interdigital bandpass filter at the operating mid-band frequency of 1.75 Ghz, which is in L-frequency band (1–2 Ghz). Unlike the conventional interdigital bandpass filters, in which we use short circuit connection by a via hole, this filter is simple and compact and its design is …
Published in Journal of Electronic Design Technology · Vol. 4, Issue 1, 2013 · pp. 15–18 Read article
-
Radio Frequency Energy Harvesting Using Microstrip Antenna
Abstract: In this paper, an antenna for energy harvesting in radio frequency range has been studied. The presented microstrip antenna gives good return loss obtained for wide range of applications in RF region ranges from 2.33 to 6.68 GHz. The anticipated antenna is best suitable to receive the RF energy from the environment that can be used to charge the electronic devices. The simulations of the proposed antenna were carried using …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 3, 2017 · pp. 12–15 Read article