Search
16 articles for “Glycerol”
-
Synthesis of Biodiesel fuel additive from Glycerol using Cationic ion exchange resin- A review
Abstract: With the alarming increasing of oil consumption and the number of automotives being instilled, there has been immense research taking place to find a sustainable fuel to replace the current fossil fuels and also not render the current automotives obsolete. The current favorable solution to this is Biodiesel which can be generated either from oil seeds or waste vegetable oils. The selectivity of this process is 90% and the byproduct …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 3, 2019 · pp. 1–8 Read article
-
Effect of Ta2O5 as a Support in Phosphotungstic Acid Catalysts for Vapor Phase Dehydration of Glycerol to Acrolein
Abstract: The Ta2O5 supported phosphotungstic acid (HPA) catalysts were investigated for vapor phase dehydration of glycerol to acrolein and materials were synthesized by impregnation method. The above HPA catalysts were characterized by Raman spectroscopy to identify the Keggin ion and temperature programmed desorption of ammonia to explore the acidity of the catalysts. The findings of Raman spectra shows that the Keggin ion of heteropolyacid intact with support. NH3-TPD results confirm that …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 1–6 Read article
-
Studies on Mechanical, Thermal Properties, Characterization and UV-Accelerated Weathering of HIPS-PLA Blends using Glycerol as Compatibilizer
Abstract: AbstractHIPS (High Impact Polystyrene) was blended with PLA (poly lactic acid) in three formulations as 80:20, 65:35 and 50:50% (wt%) using a twin screw extruder and by using glycerol (4%) as compatibilizer. Test specimens were prepared by using an injection moulding machine and the mechanical, thermal and electrical properties were determined. The tensile strength first decreases and then increases with increasing percentage of PLA, but lower than that of both …
Published in Journal of Polymer & Composites · Vol. 5, Issue 2, 2017 · pp. 1–11 Read article
-
Effect of Softening Agents in the Thermal and Morphological Properties of Starch Based Bioplastics
Abstract: Plasticization of starch with 1,2,3-trihydroxy-propane (glycerol) as a softening agent (plasticiser) can replace the starch-starch bonds to starch-massive glycerol bonds, which offers stability, improved physicochemical and functional properties of starch. This study is an investigation on the thermal and morphological properties of bio plastic samples made of starch with varying plasticiser contents (8, 6.5, 5, 3.5 and 2 ml) and are evaluated by methods like thermogravimetric analysis (TGA), differential scanning …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 15–24 Read article
-
Studies on Mechanical, Thermal, Physical Properties and Characterisation of PLA-EVA Blend with Microclay and Product Development
Abstract: PLA-EVA (70:30 wt. %) with microclay (1, 3, 5 wt. %) was also melt blended using Glycerol (1%) was used as compatibilizer in a twin screw compounding extruder. Then test specimens were prepared by an injection molding machine. Mechanical, thermal and physical properties were evaluated. As microclay content was increased, the tensile strength, elongation at break and tensile modulus were slightly decreased but higher than that of PLA-EVA (30 wt. …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 24–33 Read article
-
Oral Thin Films of Ondanetron Hcl: Formulation and Performance Evaluation
Abstract: This study had the goal to formulate oral polymeric thin film that would dissolve and disintegrate instantly, while also having high mechanical features. These are the most advanced forms of solid dosage forms. Solvent casting was the technique employed to create oral thin films. These are additionally referred to as buccal films/strip, mouth dissolving films, oral thin films, as well as oral strips of paper. These films are suitable for …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 11, Issue 3, 2024 · pp. 1–6 Read article
-
Effect of Formaldehyde Treatment on the Barrier and Mechanical Properties of Oat Protein Films
Abstract: Oat protein 5% with 40% glycerol as a plasticizer was used to prepare edible films, and formaldehyde was chemically added to the film's solution at four concentrations. The films' barrier and mechanical properties were then investigated. The films were characterized by being medium transparency, homogeneous, odorless, and with a thickness ranging between 0.12 and 0.15 mm. It was also observed that the water vapor permeability decreased whenever the concentration of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 1–8 Read article
-
Biochar-Filled Soy Protein Composites: Evaluating Thermal and Mechanical Properties for Sustainable Polymer Applications
Abstract: The growing demand for environmentally sustainable and biodegradable materials has intensified interest in alternative solutions for thermal insulation. This study explores the development of composite materials using mango seed shell biochar (MSSB) and soy protein isolate (SPI) as a biodegradable matrix-filler system. Mango seed shells, an abundant agro-industrial waste, were subjected to pyrolysis at 500°C for 2 hours to produce biochar. The resulting MSSB was incorporated into SPI with glycerol …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 60–71 Read article
-
Critical Overview: Preparation of Bioplastics Using Different Reinforcement Fillers
Abstract: The widespread use of synthetic plastics poses a significant threat to the environment due to their nonbiodegradable nature and reliance on nonrenewable petrochemical sources. Among these, single-use plastics are of particular concern as they are difficult to recycle efficiently. To mitigate this issue, bioplastics offer a promising alternative, as they are derived from renewable sources and are biodegradable. Bioplastics are produced using natural materials, such as plant, animal, and microbial …
Published in Research & Reviews : Journal of Ecology · Vol. 14, Issue 3, 2025 · pp. 18–28 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
CuO/TiO2 Nanocomposites: Effect of Calcination on Photocatalytic Hydrogen Production
Abstract: Hydrothermally synthesized TiO2 nanorods were subjected to calcination from 350 to 550 °C and tested their catalytic performance for hydrogen (H2) production in aqueous glycerol solution under solar irradiation. High rate of H2 evolution ca.300 µmol.h−1.g−1cat was recorded with TiO2 nanorods calcined at 500 °C. The nanocomposites were prepared by varying Cu-loading 0.1 to 2.0 wt% and activated at 350 or 500 °C. About 25 folds enhancement in H2 production …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 13–20 Read article
-
Biocatalytic Process by Biodiesel Production to the help of Environment
Abstract: The synthesis of fatty acid esters using vegetable oils seems to be a crucial process that yields good diesel fuel substitutes and useful oleochemical intermediates. Biodiesel is made from fatty acid methyl esters, which are a mixture of mono-alkyl esters produced from vegetable oils including sunflower oil, soyabean oil, rapeseed oil, peanut oil, cotton seed oil, and animal fats like pig fats and lard. Biodiesel can also be made from …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 3, 2021 · pp. 29–33 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Effects of Plasticizers on Structures of Chemical Functional Groups, Morphologies, Water Vapor Permeability, and Thermal Properties of HPMC/BW Biopolymer Films
Abstract: Food preservation is one of the fields that many researchers are interested in, especially in the epidemic period like COVID-19 today. The better food or agricultural products are preserved for a long time, the more it ensures social stability for state management related to food security for people. This paper introduces one kind of biopolymer films with investigation on effect of plasticizers to its characteristics. In order to produce biopolymers, …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 10–20 Read article
-
Potential of Biodiesel Production from Algae
Abstract: It is necessary to achieve targets for biodiesel production from Algae for the climate change mitigation and economic growth. In this content biodiesel as a biofuel is produced from microalgae, offer the greatest opportunities in the society. This paper consists the current status of microalgae use for biodiesel production, effect of parameters on Biodiesel production, process of transesterification including Lipid extraction and the cultivation, harvesting and processing of algae. During …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 49–60 Read article