Search
25 articles for “Frictional Force”
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Parameter Identification of Vibrating MIMO Mass-Spring-Damper Mechanical Systems with Coulomb Friction
Abstract: This study presents a time-domain method for identifying parameters in multi-degree-of-freedom (DOF) linear mass-spring-damper systems that include Coulomb friction, where the friction coefficient varies within a limited range, using measurements of position and control force. For mass identification in single-degree-of-freedom (DOF) vibrating mechanical systems with stiffness and no damping but Coulomb friction, the friction term is eliminated by first derivative processing. In addition, the identification of the coefficient of friction …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 20–34 Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Innovative Use of Pressure Relieving Foam Based Garment for Lumbar Pressure Sore
Abstract: Pressure ulcers, stemming mainly from friction and shear forces, manifest as chronic wounds that worsen over time. They commonly afflict individuals who are bedridden or have limited mobility. Our investigation involved a 62-year-old male with a hypertrophic scar on his back resulting from the excision of a carbuncle. Subsequently, he developed a lumbar pressure sore at the scar site. To address this issue, adjustments were made to his pressure garment, …
Published in International Journal of Biomedical Innovations and Engineering · Vol. 2, Issue 1, 2024 · pp. 52–56 Read article
-
Simulation of Electric Vehicles DC Engine Performance
Abstract: This works develops a simulation model to predict the performance of direct current electric motors for electric vehicles (EV), mainly focused on the required power and mechanical torque as a function of the driving conditions. The simulation, therefore, has been based on the dynamic conditions of the electric vehicle to reproduce the current driving in urban routes or intercity travels. The model has been applied to synchronous and asynchronous transmission …
Published in Journal of Automobile Engineering and Applications Read article
-
Hybrid Numerical–Artificial Neural Network Study of Chemically Reactive MHD Nanofluid Flow Incorporating Thompson–Troian Slip and Stefan Blowing
Abstract: Boundary layer behaviour in chemically reactive nanoliquid is significantly affected by surface conditions, magnetic fields, heat and mas transfer mechanisms. However, the combined impact of Stefan blowing and nonlinear Thompson–Troian slip under inclined magnetic fields remains mostly unexplored, particularly in mixed convection flows. In this research work, the flow of a chemically reactive nanoliquid over a permeable surface is investigated by considering the Troian slip, inclined magnetic fields, Stefan blowing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 409–425 Read article
-
Design and Development of an Electromagnetic Propulsion Train
Abstract: The recent advancement of new transportation techniques led to the search for methods of propulsion that were superior to classical mechanical systems. Among these new moments, electromagnetic propulsion (EMP) has attracted attention because this technique allows for motion generation via electromagnetic force without using conventional wheel-based friction processing. The paper describes the conceptual design, principle of working and performance evaluation of a prototype model train to be propelled electromagnetically.The system, …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 19–24 Read article
-
High Efficiency Linear Motion Using Sequential Coil Electromagnetic Propulsion Train
Abstract: The Electromagnetic Propulsion Train project efforts on developing a model that proves linear motion using exactly controlled electromagnetic forces. Dissimilar conventional railway systems that depend on mechanical drives, traction motors, and wheel–rail friction, this model uses a coordinated arrangement of electromagnets positioned along the track to generate attractive and repulsive forces, which together produce the essential propulsion. This method reduces dependence on mechanical movement and highlights the possible of magnetic …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 32–39 Read article
-
Electro Magnetic Force based Train
Abstract: The swift advancement in transportation technology encouraged scientists to seek out faster and eco-friendly propulsion techniques. The majority of transportation systems depend on mechanical engines and wheel-axle setups that generate friction, noise and energy dissipation. Because of these drawbacks there is potential for propulsion approaches. A contemporary technique is propulsion, which utilizes electromagnetic forces rather, than traditional mechanical movement. This research paper addresses the design and operation of a train …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 37–45 Read article
-
Experimental investigation of thermally grown Indium film’s structural and tribological properties
Abstract: Indium thin film growth found numerous applications, such as cold welding of infrared detectors and readout-integrated circuits (ROIC) to form sensor chips. In film is grown on the Si substrate by thermal evaporation. The XRD results indicated the tetragonal bcc phase in the (101) preferential plane. Scanning electron microscopy (SEM) indicated an uniform, continuous film covering the whole surface. The EDS examination confirmed the pure In film. The atomic force …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 58–66 Read article
-
Comparative Analysis of Disc Brake Using Eco-Friendly Material
Abstract: Brakes are crucial components for slowing or stopping the vehicle. Almost all vehicles use disc brakes. The working of a disc brake is simple; when the brake pedal is pressed, braking pads are forced mechanically against the rotor or disc on both surfaces. The friction generated between the rotor and brake pads slows down the vehicle. The design and materials of disc brakes play a significant role in their performance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 532–544 Read article
-
Seismic Analysis of Base Isolation for Protection of Rural Building of Different Shapes
Abstract: India is a developing country, more than 50% of Indian population lives in unreinforced masonry structures. Masonry structures are vulnerable to seismic loading and load acting in it’s out of plane, hence performs poorly and sometimes leads to sudden collapse. Collapse of structure not only damages public property but also costs the lives of people. Base isolation techniques for these types of structure can be proven to be beneficial, in …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 32–43 Read article
-
Experimental Investigation of Aluminum Alloy 8010 by Friction Stir Welding
Abstract: A solid state welding method called friction stir welding (FSW) is used to fuse metals and alloys that are challenging to fuse using traditional fusion welding. The effects of tool pin and shoulder diameter on joining the aluminum alloy Al 8010 were examined in this study. The basis material for combining single butt-welded joints is a plate with a thickness of 6 mm. The welding was carried out on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 14–19 Read article
-
Energy-Efficient Design Strategies for Sustainable Machine Tool Development
Abstract: The design of energy-efficient machine tools is essential for promoting sustainable manufacturing, as it addresses the significant energy consumption and carbon emissions generated by these tools in industrial settings. This study investigates innovative design approaches that enhance energy efficiency, with a focus on lightweight materials, improved drive systems, smart control frameworks, and methods for recovering energy. Implementing lighter structural materials allows machine tools to operate with less force, which in …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 30–34 Read article
-
Wear Performance of Cylindrical Shaped Alumina Nanoparticles Filled Epoxy Composite
Abstract: Low cost high specific strength epoxy LY 556 and alumina nano filler is utilized in current research for developing a epoxy composite. A liquid dispersion method was adopted for fabricating epoxy alumina composite having 0.50 wt% of alumina reinforcement. For uniform and homogenous dispersion of reinforcement, ultra-sonification of 120 W is adopted. To study the effect of particle behavior, unfilled epoxy and 0.5 wt.% cylindrical alumina oxide filled epoxy composite …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 94–100 Read article
-
A Study on Friction Stir Processing Effected on Hardness and Tensile Properties When Single Pass and Double Pass Is Considered Using Al 6061 And Steel Material
Abstract: The principle of friction stir welding was initially employed to build the emerging technology known as friction stir processing, or FSP. FSP has shown to be a successful method of developing face mixes and increasing the material's mechanical parcels. Aluminum blends are among those accoutrements over which the FSP can be performed successfully. The study comprised the careful processing of steel and Al 6061 samples using both single and double …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 16–23 Read article
-
Hybrid Braking System: Electromagnetic + Disc Braking
Abstract: The Hybrid Braking System combines electromagnetic braking and traditional disc braking to enhance vehicle safety, improve braking response, and reduce mechanical wear. This system integrates sensor fusion technologies, including ultrasonic and infrared sensors, to enable adaptive braking based on real-time road conditions. A PID-based control algorithm optimizes braking force distribution, ensuring a smooth and controlled deceleration. Additionally, the incorporation of regenerative braking allows for energy recovery, increasing vehicle efficiency and …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 8–14 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Investigation of Forced Convection Heat Transfer Efficiency Using Cuo/Water Nanofluid in A Concentric Tube Heat Exchanger with Helical Coiled Insert
Abstract: An apparatus that uses nanofluid to transport heat is called a heat exchanger. This uses a nanofluid as the working fluid. One can make nanofluid hanging nanoparticles in liquids such as petroleum products, water, oil, ethylene glycol, fluorocarbons, etc. Forced convection heat transfer using CuO/water as a Nanofluid and distilled water as the base fluid has been examined in a concentric tube heat exchanger with helical coiled insert. Tests on …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 27–41 Read article