Search
110 articles for “Fibre composite”
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Impact of Chemical Conditioning on the Mechanical Performance of Pine Fibre-Reinforced Composites
Abstract: The study examines the effects of treatments like alkaline, silane, and acetylation on enhancing the mechanical strength and reducing water absorption in pine fiber-reinforced composites. Natural fibres, while eco-friendly and sustainable, present challenges in fibre-matrix adhesion due to their hydrophilic nature, impacting composite performance. Chemical treatments were employed to modify fibre surface characteristics, enhance interfacial bonding, and thereby improve mechanical properties. Silane-treated composites exhibited the highest tensile and flexural strengths, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 140–150 Read article
-
A Study of Nacl Alkali Treated Muntingia calabura fibre Reinforced Composites
Abstract: Natural fibre reinforced composites are more commonly used in various applications due to their biodegradability, low cost, available in nature and less harmful to the environment than synthetic fibres. In the present study, NaCl alkali treated MuntingiaCalaburafibres(MCF) reinforced composites are developed using hand layup technique and evaluated the mechanical properties of the composites. The increase of the NaCl content (up to 20 percent) and the fibre weight is maintained constant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 500–507 Read article
-
Integrated DIPlib and OpenCV Framework for Precise Geometric Characterisation of Woven Fibre-Reinforced Polymer Composites
Abstract: The mechanical properties of woven fibre-reinforced polymer (FRP) composites stem entirely from the geometrical regularity inherent in their reinforcement structure. Changes in the size of the unit cell, fibre tow separation, weave angle, and fibre tow spacing will have an immediate effect on the stiffness and shear modulus of the material. In this paper, a combined machine vision system that incorporates both the OpenCV and DIPlib libraries is proposed for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 158–171 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Comparative Analysis of Natural and Synthetic Fibre-Reinforced Composites: Mechanical Properties, Processing, and Sustainability Considerations
Abstract: The development of fibre-reinforced composites has significantly advanced engineering applications due to their excellent strength-to-weight ratio, corrosion resistance, and versatility. Synthetic fibres such as glass and carbon provide superior mechanical performance, but their production is energy-intensive and environmentally harmful. Natural fibres, including jute, flax, banana, and hemp, offer biodegradability, lower cost, and sustainability benefits, though they often fall short in strength and durability. Hybrid composites frequently demonstrate improved performance by …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 77–95 Read article
-
Mechanical Performance Evaluation of Brachyuran Shell Particle-Infused S-Glass Fibre Epoxy Polymer Composites
Abstract: Epoxy composites bio-filled with brachyuran crab shell powder and reinforced with S-glass fibres at different loadings (2%, 4%, and 6%) are tested for their mechanical properties in this work. Using modest amounts of filler significantly improved hardness, ultimate tensile strength, and flexural strength in the empirical data. The largest increase in hardness was 64.42% at 4% filler, up from 26.22% at 2%; however, there was a dramatic decrease to 13.11% …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 500–507 Read article
-
Characterization of Polymer Based Natural Fibre Clay Nano Composites
Abstract: Research on biocomposites is gaining significant attention due to the growing emphasis on sustainable and environmentally friendly materials. Biocomposites offer a promising alternative to traditional synthetic materials, such as plastics, which have environmental concerns like non-biodegradability and pollution. Natural fibers are often more affordable than synthetic materials, potentially leading to cost-effective products. Natural coir and jute biocomposites can be used in various industries, including automotive, construction, packaging, and textiles. Coir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 398–404 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article
-
Acalypha Indica Root Fibre in Polymer Composite: Mechanical Characterization
Abstract: The mechanical characteristics of Acalypha Indica root fibre reinforced epoxy resin composites, including tensile strength, tensile modulus, percentage of elongation, flexural strength, and impact strength, were studied. Composites were fabricated using epoxy glue and randomly oriented fibres of 3 mm length in varying weight ratios of 10%, 20%, 30%, and 40%. The hand layup method was followed by compression moulding to construct the composites. The study aimed to determine the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 512–522 Read article
-
Effect of Carbon Nanotube on Mechanical Properties of Jute Fibre Reinforced Polyester Composite
Abstract: The current study studies how carbon nanotubes affect the mechanical characteristics of polyester composites reinforced with jute fiber, both treated and unprocessed. Alkali was used to cure jute textiles. Composites with treated and untreated jute fibre with 5%, 10% and 15% jute fibre loading with and without carbon nanotube were prepared using hand lay-up process. Carbon nanotubes varied from 0.2%, 0.4% and 0.6%. Tensile, flexural, and strength of impact all …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article
-
Adhesively Bonded Patch Repair in Polymer Composites: Effects of Reinforcement Configuration and Post-Cure Temperature
Abstract: Adhesive patch repair technique has been identified as an effective and economical approach to repair damaged polymer composite structures that are used in aerospace, automotive, marine, wind energy, and many other high-performance engineering applications. Adhesive bonding offers superior stress distribution, reduced stress concentration, less structural weight and fatigue resistance, and thus increases the lifetime of the repair of composite structures when compared to the traditional mechanical attachment approaches. Performance and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 991–1001 Read article
-
Experimentation and Investigation of E - Glass Fibre/ Polyester Composites Laminates
Abstract: This paper centres on the autoclave moulding technique, offering a comprehensive analysis of the specimen fabrication process. The advanced composite manufacturing process involves the use of high temperatures and pressures during the curing step. This results in composite specimens that have a higher density and are devoid of any voids. Polyester, E-glass fibre, and SiC powder are the material components that make up the composite in this study. It is …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 477–487 Read article
-
Mechanical Characterization of Prosopis Juliflora Fibre-Reinforced Epoxy Composites for Sustainable Automotive Applications
Abstract: This study investigates the potential of Prosopis juliflora (PJ) fibre as an eco-friendly, economical, and mechanically efficient reinforcement for epoxy-based polymer composites. Composite samples were produced using the compression moulding technique with epoxy-to-fibre weight ratios of 90:10, 85:15, and 80:20. Mechanical tests, including tensile, flexural, impact, and hardness evaluations, were conducted in accordance with relevant ASTM standards. The incorporation of PJ fibre resulted in significant improvements in the mechanical behaviour …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1720–1728 Read article
-
Characterization of Bamboo-Fiber Reinforced Geopolymer Composites
Abstract: In this project, we plan to produce and assess a new, eco-friendly composite made from geopolymer (from a combination of fly ash and GGBFS), strengthened with chemically treated bamboo fibres for retrofitting earthquake-resistant buildings. Geopolymer is produced by activating a mixture of fly ash and GGBFS with sodium silicate and sodium hydroxide solutions. We have produced and analyzed bamboo fibre-reinforced geopolymer composites as potential materials for seismic retrofitting of structures …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1007–1025 Read article
-
Development and Evaluation of Sodium Hydroxide-Treated Jujube Pit Reinforced Epoxy Composites
Abstract: The automotive sector has experienced a tremendous transformation, propelled by the increasing demand for materials that provide a balance between mechanical performance, economic efficiency, and environmental sustainability. In accordance with worldwide sustainability goals, the trend has moved toward the utilization of lightweight, recyclable, and biodegradable materials in modern vehicle architecture. Natural composite materials, which are derived from renewable resources such as seeds, leaves, and tree barks, have gained considerable attention …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 494–501 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article