Search
833 articles for “Experimental performance”
-
Experimental Investigation on the Performance of Photovoltaic Panel with and Without Phase Change Material Heat Sink
Abstract: AbstractThe future of solar energy conversion into electricity is one of the recognized classes of technology seeing that abundance of a free and clean source of energy in almost every part of continents. The effect of exceeding in temperature on Photovoltaic (PV) cells remains one of the major disadvantages of this technology. In order to improve the power utilization of the PV panel, it is necessary to maintain cell temperature …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 2, 2020 · pp. 15–23 Read article
-
AN EXPERIMENTAL INVESTIGATION OF HIGH PERFORMANCE BY USING STEEL AND POLYPROPYLENE FIBRES
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
An experimental investigation of Prosopis Juliflora Biodiesel’s performance and emission characteristics
Abstract: Fossil fuels are currently in crisis due to their higher cost, their increasing use, and their scarcity. In view of the large number of cars on the road and the emission levels caused by combustion ignition engines, fuel substitutes are sought. Diesel is the most expensive fuel on the market, so biodiesel is a good alternative. Aside from its low toxicity, it reduces greenhouse gas emissions, does not emit sulphur, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 67–75 Read article
-
Experimental Study on Fibre Reinforced High Performance Concrete with Silica Fume
Abstract: This paper presents the effect of silica fume and glass fibre in High Performance Concrete (HPC). In this study, High Performance Concrete mixes with silica fume of 0, 10, and 20% with addition of glass fibre of diameter 14 μ and 12 mm length at various percentages as 0, 0.3, and 0.6% by the volume of cement on M75 grade of concrete. The mix proportions of concrete had a constant …
Published in Journal of Construction Engineering, Technology & Management · Vol. 3, Issue 1, 2013 · pp. 26–30 Read article
-
Study of Experimental and Finite Element analysis of Composite Mudguard for Performance Enhancement with Existing Material
Abstract: Two wheelers sale is creasing in India with drastically level So, this results into increase competition in Competition in this segment has made the two-wheeler OEM to manufacture product at low cost without comprising its performance. Vibration Analysis is modern method to evaluate the life span of components performing vibration, therefore we can manufacture component with alternative material within less time. Front mudguard is a styling component generally made with …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 1, 2021 · pp. 33–42 Read article
-
Experimental Investigation of Double Pipe Heat Exchanger to Improve Thermal Performance, By Using Cerium Oxide (CeO2) Nanofluid
Abstract: Heat exchanger is a device which is very important in every modern industry. Cerium Oxide is used as a nanofluid in this research paper which is made by mixing Cerium Oxide (CeO2) and water. The thermal performance analysis of double pipe heat exchanger is performed by changing the composition of Cerium Oxide nanofluid . At different flow rates (7, 8, 9 litres/min) of nanofluid, flow volume concentration (2%, 3%, 4%) …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 3, 2021 · pp. 24–31 Read article
-
Experimental Study on Micro Silica Amalgamated High Performance Concrete
Abstract: AbstractIn this paper, an endeavour has been made to swot the effect of micro silica (MS) or silicafume with partial replacement of cement (i.e., 0, 5, 10, 15, 20 and 25%) and also with fullreplacement of natural sand by crusher wash sand (CWS) on strength and durabilityproperties for high performance concrete (HPC) of M50 grade with water cement ratio as0.30. Test results indicate that, the use of MS has improved …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 46–52 Read article
-
Smart Solar Tracking System for Maximizing Energy Output
Abstract: This paper presents the design and development of a dual-axis solar tracking system using a stepper motor and light- dependent sensors to maximize solar energy capture. The proposed system continuously aligns the photovoltaic panel perpendicular to the sun’s rays, thereby improving overall power-generation efficiency. A complete prototype was developed and experimentally tested. To assess system performance, experimental testing was carried out in a variety of lighting and environmental settings. When …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 1, 2026 · pp. 21–27 Read article
-
Enhanced Durability and Performance of Reinforced Concrete Beams through CFRP Wrapping: An Experimental Investigation
Abstract: Globally, maintaining and repairing aging reinforced concrete structures poses a significant challenge for the construction industry. Numerous structures built before modern earthquake-resistant design codes lack adequate seismic resilience. Additionally, evolving service requirements often necessitate strengthening existing structures to handle increased loads. While past research explored the effectiveness of various Fiber Reinforced Polymer (FRP) wrappings under specific conditions, limited studies have comprehensively compared the performance of Carbon Fiber Reinforced Polymer (CFRP) …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 37–49 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Polymeric Microfluidic Chips for Rapid Point-of-Care Diagnostic Testing
Abstract: Polymeric microfluidic chips have emerged as promising platforms for rapid point-of-care (POC) diagnostic testing by integrating sample preparation, fluid manipulation, biochemical reactions, and signal detection within compact and potentially low-cost devices. Their compatibility with materials such as polydimethylsiloxane (PDMS), polymethyl methacrylate (PMMA), cyclic olefin copolymer (COC), polystyrene (PS), polycarbonate (PC), and polymer–paper composites provide considerable flexibility in device design and manufacturing. Advances in soft lithography, injection moulding, hot embossing, laser …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Evaluation of Acceleration Signal Frequency Results on Bearing Shell Non-destructive Testing, Ultrasonic Waves, Simulation
Abstract: Bearings are used in many rotary machines. Defects in them can cause car breakdowns, loss of production, and even catastrophic accidents. This makes them difficult to maintain and will make it costly to repair and maintain. Therefore, detecting defects in bearing vibrations is an important issue for the industry. On the other hand, error-related frequencies may be identified as discrete frequency lines, and therefore error characteristics cannot be easily identified.For …
Published in Trends in Machine design · Vol. 8, Issue 1, 2021 · pp. 42–47 Read article
-
Graph Neural Networks for Molecular Scale Property Prediction and Inverse Design of Thermoset Polymer Nanocomposites: A Computational Framework
Abstract: Thermoset polymer nanocomposites exhibit properties that are highly sensitive to molecular scale formulation decisions, yet the vast design space remains largely unexplored because of the high cost of experimental characterisation and fully atomistic simulation. This paper presents TNC GNN, a dual mode graph neural network framework developed for the computational design of thermoset nanocomposite formulations. The forward module employs an attention augmented Message Passing Neural Network with 3D geometric encoding …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Design, Analysis and Experimental Study of Worm and Worm Gear Pair for Plug Valve Application
Abstract: The present work deals with the design procedure, load carrying capacity, mathematical modelling,analysis of worm and worm gear for plug valve application. The plug valves are used in various fluidservices applications. It performs well in slurry applications. It is also used in air, gaseous servicesand oil piping systems and a like applications. In plug valve the main and important function of theworm gear drive is to reliably transmit torque and …
Published in Trends in Machine design · Vol. 8, Issue 1, 2021 · pp. 11–20 Read article
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Study of the Influence of Thermal Tempering on the Bending Behavior of the Silico Soda Lime Glass Material
Abstract: In this contribution, we examine the mechanical behavior of tempered soda-lime-silica glass plates and show that improvements in performance can be achieved through the change of the structural and mechanical properties. Tests of thermal tempering by air jet have been performed on glass plates of different dimensions. Three-point bending tests have been conducted on nontempered and fully tempered float glass plates of four different sizes. A parametric study on the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 160–168 Read article
-
Thermal Performance Enhancement Strategies for a Compact Solar PV-Powered Concentrating Water Heating System Through Integrated Collector Design
Abstract: Solar water heating systems have emerged as one of the most promising renewable energy technologies for reducing dependence on conventional fossil fuels and electricity-based water heating. However, the thermal performance of compact solar water heaters is often limited by inadequate solar absorption, poor heat transfer, and thermal losses within the collector assembly. This study presents a theoretical investigation of thermal performance enhancement strategies incorporated into a compact solar photovoltaic (PV)-powered …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 2, 2026 Read article
-
To Evaluate the Performance of the Selected Hybrid Systems and Validation of Mathematical Model with the Experimental Data
Abstract: The main aim of this paper to evaluate the performance of the PV-Wind hybrid systems and validation of mathematical model with the experimental model. In the research paper, the experimental model of PV-Wind Hybrid system has been installed at a height of 22 meters in the School of Energy and Environmental studies, DAVV, Indore, and M.P., India. The theoretical calculation of the wind generator output has also been compared with …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 2, 2025 · pp. 20–28 Read article