Search
20 articles for “Annealing”
-
Effect of Radiation Dose, Dose Rate and Annealing Temperature on Edible Potato Starch by Spectroscopic Methods
Abstract: Potato starch (PS) is a favorite food choice in different forms. During its storage and applications the PS is exposed to different radiations. In the present study the authors attempt to compare radiation effects (gamma and Electron beam of same radiation dose) in PS by Electron spin resonance (ESR) and Fourier transform infrared (FTIR) methods. ESR spectra of gamma irradiated PS appeared to have resolved shapes than the electron beam …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 198–209 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Quasar: Quantum-Accelerated Sustainable Anomaly Recognition in Climate Systems
Abstract: Accurate detection of climate anomalies is vital for disaster alleviation and policy making in a sustainable manner, but customary detection methods face the challenges of computational inefficiency and physical inconsistency. In this study, we propose a novel approach called Quantum-Optimized Fuzzy Physics-Informed Neural Networks (QFuzzy-PINNs), which integrates quantum computing, fuzzy logic, and physics-informed deep learning. As a first step, we employ quantum annealing for conventional optimization to adjust multiple Gaussian …
Published in International Journal of Climate Conditions · Vol. 2, Issue 2, 2025 · pp. 18–27 Read article
-
Parallelization of Metaheuristics for the Optimization of Permuted Perceptron Problem
Abstract: Parallel computing has found a mainstream backing in graphics processing units (GPUs).These resources have enormous processing capacity, are energy efficient, and are broadly available, unlike grids. Since the advent of CUDA (Compute Unified Device Architecture) developed by NVIDIA that permits GPU programming in C, C++ language, GPUs are now being used in a variety of fields, including scientific computing. This thesis focuses on the optimization of the solution of a …
Published in Journal of Operating Systems Development & Trends Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure
Abstract: Equal channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape of the billet. Researchers have discovered that the level of strain attained through equal channel angular pressing is influenced by factors such as the angle of die, friction conditions, and the implementation of back pressure. These variables significantly impact the microstructure and the irregularity of strain within the billet …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 287–303 Read article
-
Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application
Abstract: Friction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and low-energy. The present study focuses on hardness testing on welded butt joints, introducing the Friction Stir Welding procedure on aluminium alloys Al 5083, which are known for their remarkable performance in severe conditions. It is widely used in naval and marine applications due to its excellent resistance to seawater damage. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 227–236 Read article
-
Synthesis and Functional Group Analysis of Solution Processed Zinc Oxide Thin Film Grown on Polyethylene Terephthalate
Abstract: Flexible electronics field is growing every day. Existing technology is facing issues like brittleness, toxicity, inadequacy. Fabrication cost increases in processing of such materials. In this work, zinc oxide nanoparticles synthesized by solution processing technique were used to grow 120nm thick thin film (TF) on Polyethylene terephthalate (PET). This method reduces the processing cost and Zinc Oxide (ZnO) is cheaper and abundant in comparison to other semiconductors option. Material was …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 56–66 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Optimization of gas sensitivity of CuO/carbon composites with carbon particles synthesized from acacia auriculiformis branches
Abstract: Carbon particles fabricated from the core of acacia tree branches were utilized to synthesize CuO/carbon composite films. The gas sensing properties of these films grown on glass substrates using the doctor blade method were measured in 1000 ppm of methanol vapor at the room temperature. All the films were annealed at 75 0C for 1 hour in air. The structure, the optical band gap and the surface morphology of the …
Published in International Journal of Membranes · Vol. 1, Issue 1, 2024 · pp. 22–30 Read article
-
Optical Along with Magnetic Properties of Doped Nano-Structured Mos2 Nano-Films by Spin Coating
Abstract: The supernatant containing 2D nano-flakes of Molybdenum di-sulphide (MoS2) are synthesized and collected using wet chemical synthesis process. The dispersed MoS2 nano-flakes solution is having strong absorbance values at 627 nm and 690 nm conforming to an energy band gap BG of 1.79 eV and 1.98 eV. Thereafter, MoS2 thin films with and without magnetic doping (cobalt) are deposited on n type silicon by spin coating technique. These samples are …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 297–302 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Designing and Modeling of Giant Magnetoresistance (GMR) Materials based Devices in Electrical Power and Biomedical Systems
Abstract: This paper presents Designing and Modeling of Giant Magnetoresistance (GMR) Devices in Electrical Power and Biomedical Systems and the related materials. The GMR, inverse GMR, and Spin valve using exchange bias have been analytically derived and discussed from the designing point of view for optimizing the performance of the GMR based Devices in Electrical systems. More recently, GMR has been used in sensors, magnetic memory chips, and hard-disk read-heads. The …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 1, 2025 · pp. 22–32 Read article
-
Gas Sensors Fabricated using Carbon Powder Derived from Dried Banana Peels Waste to detect Methanol, Ethanol, Acetone Vapors and Carbon Dioxide Gas
Abstract: Low cost and environmentally friendly activated carbon powder was synthesized using waste banana peels. Phosphoric acid was utilized as activation agent. Doctor blade method was employed to fabricate films of activated carbon on conductive or nonconductive glass substrates. Films were subsequently annealed at 70 0C for 30 minutes in air. According to XRD patterns, single phase of activated carbon was crystallized in thin film form. Carbon prepared from banana peels …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 14–25 Read article
-
Machine Learning Framework for Optimizing Polymer–Metal Oxide Composites as Charge Selective Layers in Perovskite Solar Cells
Abstract: To achieve high-performance and stability of perovskite solar cells (PSCs), it was important to incorporate innovative interfacial materials to tune the balanced charge extraction, low recombination, and enhanced operational lifespan. On this note, polymer composites with metal oxides have been proposed as promising candidates as charge selective layers (CSLs), whereby they present a rare combination of tunable energy levels, improved film forming abilities, and better interface engineering capabilities. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1073–1098 Read article
-
Post-Treatment Methods in Additive Manufacturing: A Review of Mechanical, Thermal, Chemical, and Hybrid Approaches
Abstract: Additive manufacturing, particularly Fused Deposition Modeling (FDM), has become a cornerstone of rapid prototyping and functional part production due to its accessibility and material versatility. However, the inherent layer-by-layer nature of FDM introduces surface roughness, reduced mechanical strength, and anisotropic behavior, which limit its industrial applications. This literature review investigates the impact of chemical post-processing treatments such as solvent vapor smoothing, immersion, and hybrid chemical-thermal methods on the surface quality …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 25–34 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Comparative Study of Structural and Optical Properties of Bismuth Ferrite Nanoparticles for Photovoltaic Applications Synthesized via Different Sol-Gel Methods
Abstract: Pure multiferroic bismuth ferrite (BiFeO3) nanoparticles were successfully synthesized using an energy-efficient, low-temperature sol-gel method, comparing two distinct approaches: auto-combustion and non-auto-combustion. To ensure phase stability, the precursor solution's pH was strictly maintained between 1 and 2 using ammonia solution (NH4OH), while ethylene glycol (C2H6O2) was employed as a chelating agent for the Fe3+ and Bi3+ cations. All samples underwent a final annealing process at 500 °C to promote crystallization. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 83–94 Read article
-
Thin Film Technology in Sensor Manufacturing – A Technical Discussion
Abstract: Thin‑film technology has become the cornerstone of modern sensor manufacturing, enabling the convergence of miniaturisation, multifunctionality, and cost‑effective mass production. This paper surveys the latest advances in deposition techniques—ranging from magnetron sputtering and chemical vapour deposition to atomic‑layer deposition (ALD) and ink‑jet‑printed sol‑gel processes—and examines how their unique material‑control capabilities translate into performance gains across the sensor spectrum (chemical, physical, and bio‑sensing). By integrating nanoscale thickness control (≤ 10 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 48–58 Read article