Search
91 articles for “Al-Sic”
-
Advancements In Al6061 Metal Matrix Composites: The Role of SiC, Al₂O₃, and Graphite Reinforcements in Enhancing Properties and Applications
Abstract: Al6061-based metal matrix composites (MMCs) reinforced with silicon carbide (SiC), graphite (Gr), and aluminum oxide (Al₂O₃) exhibit a unique combination of mechanical, thermal, and tribological properties, making them highly suitable for advanced engineering applications. SiC enhances hardness, wear resistance, and load-bearing capacity, while Al₂O₃ improves thermal stability and mechanical strength. Graphite provides self-lubricating properties, reduces friction, and lowers the composite's density, improving fatigue resistance. The synergy of combining these reinforcements …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 90–98 Read article
-
Investigation of Physical Characteristics and Machining Parameters of Improved Al-SiC MMC Using Dry EDM Process for Aerospace Industries
Abstract: Aluminium-based composite is widely used in aerospace and automobile industries because it is lighter in weight; but the trouble is that it is easily worn-out and life of the components is decreased. To overcome these problems, aluminium silicon carbide composite material has been developed with good wear-resistance, hardness and lighter weight. Silicon carbide has good mechanical properties like wear resistance, hardness, toughness and high melting point. Silicon carbide weight fractions …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 1, 2018 · pp. 15–32 Read article
-
Wear Analysis of Al-SiC Composite Valve Guide by Using ANSYS: A Review
Abstract: This application of using that can promise for the future growth. To finding a wear rate of the material and comparing to the cast iron basically using in continuous life. First of all aluminum silicon carbide using in aerospace engineering, Then some few year this composite material also can be used in automobile engineering. Aluminum silicon carbide mostly used there excellent properties like high wear resistance, low density, good strength …
Published in Journal of Automobile Engineering and Applications · Vol. 2, Issue 3, 2015 · pp. 23–29 Read article
-
Development and Characterization of Al2O3-SiC Graphite Reinforced Al7075 Hybrid Composite
Abstract: The aim of the present investigation is to carry out a study of mechanical properties of aluminium alloy (7075) reinforced with silicon carbide, aluminium oxide and graphite. This composite is produced by the vortex method. The constituents of the composite are mixed uniformly by stirring action. Due to rotation of a mechanical agitator, hence creating vertex by stirring of molten metal, then by adding ingredients, the product was produced. Then …
Published in Trends in Machine design · Vol. 6, Issue 2, 2019 · pp. 15–21 Read article
-
Improved TOPSIS for Al-SiC Composite Material Selection
Abstract: This paper proposes a novel Multi-Criteria Decision-Making(MCDM) method for attaining accurate and reliable results on Al-SiC composite material selection. Many of the existing researches suggested some methods for determining weights for criteria objectively and dealt with various mathematical models for eliminating inter-criteria correlation. However, they still involve some considerable shortcomings not fitting in the reality. In this paper, in order to determine the weights of criteria, methods for both subjective …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 12–25 Read article
-
Enhancing The Mechanical Performance of Al6061/Graphite Composites Reinforced with Sic and Aluminium Oxide Processed by Stir Casting
Abstract: The study investigates the mechanical properties of aluminum alloy Al6061 reinforced with varying proportions of silicon carbide (SiC) (0 wt%, 4 wt%, 5 wt%, and 6 wt%) and aluminum oxide (Al₂O₃) (0 wt%, 4 wt%, 3 wt%, and 2 wt%), with a constant addition of 1 wt% graphite. The composites were fabricated using the stir casting process, an efficient and economical method for uniformly distributing ceramic reinforcements within the metal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 66–74 Read article
-
Finite Element Analysis of Spur Gear Manufactured of Al7475-SiC Composites
Abstract: The spur gear is used in power transmission systems in industrial and automotive sectors. But sometimes, these gears have problems with their teeth due to excessive stress and wear. Some gears don't work as well, so in the present work better material is used to make them work well. Composite materials, which is known for their optimal strength-to-weight ratio and weight reduction benefits. So, these materials are considered substitutes for …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 279–284 Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Multi Objective Optimization of Aluminium (AA6061-SiC-Flyash) Metal Matrix Composites using TOPSIS Method
Abstract: Metal Matrix Composites (MMCs) have significant interest due to their superior mechanical properties, including improved strength, hardness, and fracture resistance. This study investigates the optimization of the mechanical and fracture behaviour of casted AA6061-SiC-Fly Ash (FA) MMCs using the TOPSIS method. Silicon carbide(SiC) and fly ash (FA) reinforcements, with different weight percentages of 5%, 10%, and 15% were fabricated through sand casting method. Total 10 combinations of composites are prepared …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 459–469 Read article
-
Evaluation of Physico-mechanical Properties of Aluminium-based Matrix Reinforced with SiC and Porcelain for Automotive Components
Abstract: The present study examines an effort to synthesize the composition of the hybrid metal matrix, by using aluminium-based matrix reinforced with silicon carbide and ceramic porcelain material. Weight reduction and reliability of components are the main priorities when developing automotive parts, it is essential to select and use materials with a high strength to weight ratio. It was feasible to identify an appropriate material for automotive applications by using this …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 37–43 Read article
-
Characterization of Aluminum Metal-Matrix Composite with SiC and B4C Reinforcement with Different Weight Percentage
Abstract: Metal Matrix Composites (MMCs) have been prepared by compo casting method. The effect of matrix material on the wettability/compatibility of refinement with matrix is studied. Silicon and boron ceramic particles were used as reinforcement in aluminum matrices. The study of density, micro-hardness and the tensile strength has been done in order to characterize the same. It is found that Al-SiC MMC shows an increase in density with increasing weight percentage …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 1, 2015 · pp. 1–6 Read article
-
Metal Matrix Composites: Materials with the best property combination
Abstract: AbstractMetal matrix composites have been emerging out to be the most sought after materials in the field of Metallurgy and Materials Engineering. The basic driving force behind their wide applications is the fusion of ductile nature of metallic constituent and strong ceramic phases. This combination would always yield a structure with good toughness and longer service life. Aluminum-Silicon Carbide (SiC/Al) is a metal matrix composite that combine the properties of …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 13–18 Read article
-
Fabrication and Multi scale Characterization of Functionally Graded Composites Reinforced with Hybrid Ceramic–Metallic Phases
Abstract: Using composite materials as functionally graded composites (FGM) can improve its excellent material properties. In this work, magnesium peroxide, silicon carbide, and aluminum are used to create four-layer FGMs. The sintering process, which blends the particles of each material using a powder methodology, has been used to complete the fabrication process. Three factors, including sintering time, sintering temperature, and compacting pressure, are taken into account when fabricating FGM. The FGM …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 1–11 Read article
-
Enhancing Mechanical Performance in Reinforced Hybrid Composites using Silicon Carbide and Aluminium Oxide Fillers
Abstract: Hybrid composites are becoming useful because they have better qualities than regular composites. This study examines the conventional properties of composites that utilise SiC and Al2O3 as filler components. Kevlar, S-glass, and sisal fibers at 90° and 0°, followed by additional layers of S-glass and Kevlar. To make sure that the material qualities were the same throughout, the resin and fibre layers were arranged in an alternating pattern. Mechanical testing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 934–945 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Synthesis and Characterization of Al-Mg-Si Alloy based Hybrid Composite Reinforced with SiC and Graphite
Abstract: The present work is carried out to investigate the mechanical properties of Al-Mg-Si alloy matrix based hybrid metal matrix composites (MMCs) using stir casting method owing to its popularity and large scale productions. SiC and graphite reinforcements were added each with 1%, 2%, 3% and 4% respectively to fabricate four composites specimens. X-ray diffractometer and scanning electron microscope were used for phase identification and microstructure characterization (SEM). Density, hardness, compressive …
Published in Journal of Polymer & Composites · Vol. 10, Issue 3, 2022 · pp. 9–19 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Performance Evaluation of Kevlar-Sisal-S-Glass Hybrid Composites with Ceramic Fillers for Structural Applications
Abstract: This study examines the mechanical properties of hybrid composite laminates reinforced with Kevlar, sisal, and S-glass fibers, and incorporating ceramic fillers—silicon carbide (SiC) and aluminum oxide (Al2O3)—within an epoxy matrix. The hand lay-up method was utilized to produce the laminates, ensuring a uniform fiber stacking sequence and including 10% filler material. Two composite variations were synthesized: one incorporating SiC and the other Al₂O₃, and both underwent tensile, flexural, hardness, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article