Search
215 articles for “Bend”
-
Evaluation of J-Integral and Fatigue Crack Growth Rate of Semi-elliptical Crack in Compressor Blade
Abstract: Gas turbine compressor blades are subjected to centrifugal, gas bending and vibratory loads. This repeated loading and unloading can reduce the life of compressor blades. This research aims at the estimation of fatigue crack growth rate of various three-dimensional cracks in a compressor blade considering the J-integral calculations for a semi-elliptical crack, subjected to centrifugal loading. Static stress analysis was carried out to ascertain the critical region or crack zone …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 39–46 Read article
-
Sign To Speech Converter For Hard To Hear And Speech Impaired People
Abstract: An enormous populace in India alone is of the hard of hearing and disabled individuals. So the framework is dealing with a glove based gadget which will be utilized for change of communication through signing to discourse. The gesture-based communication glove comprise of a straightforward hand gloves fitted with flex sensors which is being utilized for the checking how much curve on the fingers. Flex implies bend, this is the …
Published in Journal of Microcontroller Engineering and Applications · Vol. 9, Issue 2, 2022 · pp. 42–47 Read article
-
A Watch E-cut shape Textile Antenna for WB Application
Abstract: AbstractIn this article, a Watch E-cut shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable Jeans substrate is used. The return loss of Watch E-cut shaped antenna is -54 dB at 6.3 GHz resonant frequency. It covers the bandwidth from 5 GHz to 7 GHz. In this paper simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 29–32 Read article
-
Two Parabolic Shape Microstrip Patch Antenna for Single Band Application
Abstract: AbstractIn this article, a two parabolic shape Microstrip textile antenna has been simulated under CST Software using bending material i.e. Jeans. The dielectric constant of Jeans material is 1.7. For antenna to be wearable, Jeans substrate is used. The return loss of Two Parabolic shaped patch antenna is –43 dB at 7.618 GHz resonant frequency. It covers the bandwidth from 5.386 to 8.971 GHz. In this paper, simulated results like …
Published in Journal of Microwave Engineering and Technologies · Vol. 5, Issue 1, 2018 · pp. 33–36 Read article
-
Short Review on the Probability of Carbon Nanotube Based Nanofluidics in Fluid Mechanics
Abstract: In this short review, author has briefly introduced the subject named as nanofluidics. Also, author has provided a short review on passive (surface-driven) capillary flow related to microfluidics. The effects of channel aspect ratio, surface wettability, liquid viscosity, effective viscosity, centrifugal force, and bend angle, are described to control the passive capillary flow in microfluidic devices and systems. Author has demonstrated the difference between leaky-device and non-leaky device in microfluidics. …
Published in Journal of Microwave Engineering and Technologies · Vol. 7, Issue 3, 2020 · pp. 14–17 Read article
-
Critical Review of Fatigue Properties of Friction Stir Welds of Aluminum Alloys
Abstract: Friction Stir Welding (FSW) is a solid state welding technique being developed for various metals and alloys. It allows joining of high strength aluminum alloys which is generally difficult to weld with conventional welding techniques. This joining technique is energy efficient, environment friendly, and versatile. FSW is considered to be the most significant development in metal joining in a decade. It is expected to have various weld properties to meet …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 1, 2014 · pp. 1–6 Read article
-
Numerical Prediction of Shear Modulus of Multi-Layer PUF Cored Sandwich Composites
Abstract: The present numerical investigation was mainly concerned with the evaluation of apparent shear modulus (Gc) of multi-layered polyurethane foam cored sandwich beams using a novel approach through the medium of general purpose program i.e. FEM/ANSYS. Aiming to the goal, three-point bending analysis was performed on sandwich beam models made up of composite face sheets and multi-layer polyurethane foam cores of different layer densities. Finite element models of sandwich beams were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 53–61 Read article
-
Infrared Spectroscopic Studies on Multiwalled Carbon Nanotubes Reinforced Acrylonitrile Butadiene Styrene Composites
Abstract: AbstractFourier Transformed Infrared (FT-IR) Spectroscopic analysis is an effective technique to captures the response of the molecular motions such as stretching, bending and torsional vibrations of materials. In this study, FTIR analysis has been done on two different grades of multiwalled carbon nanotubes (MWCNT) C100 and NC7000. NC7000 grade MWCNT has a higher degree of crystalinity and shows 60% higher absorbance in the wavelength range of 600-3600 cm-1. These two …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 15–22 Read article
-
Studies on Modelling of Mechanical Properties of Polyester-based Semi-rigid Polyurethane Foams
Abstract: This paper describes the mechanical behaviour of castor oil based semi rigid polyurethane foams with relative density below 0.05moulded by varying isocyanate index (Isocyanate equivalent/hydroxyl equivalent) from 1:1 to 1:2. Mechanical properties of polyurethane foam mainly compressive strength is measured experimentally and the values were compared using three widely referred theoretical models namely: (i) the Empirical model (ii) Gibson and Ashby approach widely used for foam description and (iii) modified …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 77–86 Read article
-
Development of Refractory Synthesized from Waste Ceramic Fiber and Chamotte
Abstract: Research on refractory materials is always essential in thermal engineering to ensure both heat savings and environmental protection. Raw materials used initially have a great influence on the production process and product properties. In addition, the refractory products are tested under conditions of high temperature and varying intensity, such as tests of thermal shock resistance. In this study, new refractory composites were prepared by mixing waste ceramic fibers with chamotte …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 101–109 Read article
-
Study the Mechanical Properties of Epoxy Resin Reinforced with Metal OxideNanoparticles
Abstract: In this research the additive effect of (Magnesium Oxide (MgO), Zirconium Oxide (ZrO2), Copper Oxide (CuO)) nanoparticles to epoxy resin as a matrix have been studied, in addition tomanufacturing hybrid composites from the same nanoparticles which are (CuO/ZrO2, MgO/ZrO2) to epoxy resin as a matrix too. The hand lay-up method is using to manufacturing the composites from the epoxy resin and the nanoparticles with different weight ratios((0, 3, 6, 9) …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 7–12 Read article
-
Flexibility Analysis of Refinery Piping System
Abstract: Piping systems in downstream refineries and process plants experience a great thermal strain due to the difference between ambient and operating temperatures of process and utility fluid flowing through them. This thermal growth causes thermal stresses which leads to failure in piping components like flange leakage, deflection in piping, fractures at nozzle juncture and other fatal errors in piping system. Therefore, these piping structures must be flexible enough to support …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 53–59 Read article
-
Review of Subsea Pipeline for Minimizing Thermal and Pressure Expansion
Abstract: As the offshore oil and gas fields have been exploited in deeper water, subsea pipelines are required to operate at high temperatures and pressures. It causes subsea pipelines to be more subject to movements both in lateral and axial directions due to the loads produced by high temperatures and pressures. Some high temperature pipelines have experienced the cumulative axial displacement of an overall pipeline length over a number of start-up/shut-in …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 10–22 Read article
-
Fabrication of Adaptive Headlamp System
Abstract: According to National Highway Transportation Safety Administration (NHTSA), the percentage of deaths of the pedestrian is high between the hours of 6 pm. to 9 pm. Due to insufficient light conditions. Looking at the current condition it is of great importance to use available techniques to contribute to road safety by increasing the visual image provided by currently used vehicle headlights. The feature of these headlamps is that they turn …
Published in Journal of Production Research & Management · Vol. 11, Issue 2, 2021 · pp. 34–42 Read article
-
Analytical influence of soil-structure-interaction on structural performance by using ETABS
Abstract: Soil conditions have a great deal to do with damage to structures during earthquakes. Hence the study on the energy transfer mechanism from soils to buildings during earthquakes is critical for the seismic design of multi-story buildings and for upgrading existing structures. Thus, the need for research into soil–structure interaction (SSI) problems is greater than ever. Moreover, recent studies show that the effects of SSI may be detrimental to the …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 3, 2018 · pp. 1–13 Read article
-
CODAL COMPARATIVE ANALYSIS OF PSC BOX GIRDER WITHIRC AND AASHTO CODE
Abstract: The design and analysis of bridge is most critical due to standards and criteria. The bridge is widely used for transport purpose for heavy loaded vehicle. The safety as well as economy of bridge is important due to large amount of material and steel. This paper discusses comparative analysis of bridge for Trapazoidalbox girder and Rectangular box girder for economy using IRC and AASHTO code. The parametric study create model …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 3, 2018 · pp. 14–20 Read article
-
SIESMIC ANALYSIS OF MULTISTOREY BUILDING WITH FLOATING COLUMN UNDER EARTHQUAKE EXCITATION WITH AND WITHOUT CONSTRUCTION SEQUENCE ANALYSIS CONSIDERING P-DELTA EFFECT
Abstract: Rapid urbanization and population increase has led to the design of high rise buildings with varied amenities in the recent construction practices. These buildings now no more has the old same configuration on each floor, but but a range of different combinations on floors. This has made the use of floating columns an unavoidable structural element. As the storey height rises the scale to which the bending moments are transferred …
Published in Journal of Structural Engineering and Management · Vol. 6, Issue 1, 2019 · pp. 55–78 Read article
-
Design of Modified North Light Roof Trusses: Comparative Study
Abstract: The study of north light truss and modified trusses by analyzing and designing has been carried out and submitted the comparative study of the same in the form of tables, graphs and charts, which highlights the forces, deflections, optimum steel requires, actual steel requires as per grouping. STAAD.Pro V8i software also used to analysis and design of such models. Solar panel loads also considered on the truss. Limit State Method …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 27–35 Read article
-
Comparison of RCC and Steel Composite Structure subjected to Static and Dynamic Loads
Abstract: Steel has long been used for the construction projects but the use was limited to a certain height because of the buckling and bending becomes critical after a particular height.The RCC structure after extensive use and research proved to be much more economical and concrete as a construction material covered the whole urban jungle as we witness today. The hustle for the betterment of the construction industry particularly to provide …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 1–4 Read article
-
Semi-Elliptical Load Thick Beam Analysis Using 5th Order Shear Deformation Theory
Abstract: A 5th order shear deformation theory considering transverse shear deformation effect is presented for static flexure analysis of isotropic beams with built in ends. The considered displacement field accounts for non-linear variation of in-plane displacements as well as transverse displacement through the thickness of beam. The condition of zero transverse shear stresses on the top and bottom surface of beam is fulfilled. Governing equations and boundary conditions of the theory …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 9–22 Read article