Search
1971 articles for “conduction” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Machinability Studies of Chrome Steel in Turning Operation: An Experimental Investigation
Abstract: Studies on Machinability aspects are important from the standpoint of optimizing the parameters setting during the machining operations. This paper adds value to the knowledge base of machinability aspects. A report on the experimental investigation conducted, to study the effects of machining parameters on Surface Finish and Material Removal Rate (MRR) during the turning operation is presented. The current experimentation was carried out using two grades of chrome steel namely …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 2, 2016 · pp. 10–18 Read article
-
Parameters Optimization of EDM of AISI 316 Stainless Steel Material using RSM
Abstract: In this paper, cutting of SS316 material using electro discharge machining (EDM) with a copper electrode using RSM technique is discussed. Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes [1]. These methodologies are used to analyze the effect of each parameter on the machining characteristics and to predict the optimal choice for each EDM parameter such as peak current, gap voltage and pulse on time. It …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 2, 2016 · pp. 23–29 Read article
-
Optimization of Process Parameters in EDM Machine with AISI 304 Stainless Steel using TOPSIS
Abstract: The effective solution based on TOPSIS approach to determine the optimal process parameters in die sinking electrical discharge machining. Taguchi L9 orthogonal array is used to gather information regarding the process with less number of experimental runs. Experiments have been conducted using three process parameters such as peak current, gap voltage, pulse on time, with three levels are selected to optimize the multiple objectives. AISI 304 stainless steel as a …
Published in Journal of Industrial Safety Engineering · Vol. 3, Issue 3, 2016 · pp. 33–38 Read article
-
Removal of Toxic Metals from Industrial Wastewater by using Natural Adsorbent
Abstract: Heavy metal pollution has become one of the most serious environmental problem nowadays. Numerous investigation have been conducted for removing heavy metals by utilizing agricultural waste which have caught more attraction for its advantages and removal efficiency. Treatment process for removal of toxic metals include Bioadsorption, Precipitation, Ion Exchange, Reverse osmosis, Electrochemical treatment, Membrane Filtration, Evaporation, Flotation, Oxidation. Instead of using commercial materials, we have worked on inexpensive materials such …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 2, 2020 · pp. 35–40 Read article
-
Labor Productivity in Construction Worksite: Impacting Factors and Measures for Improvement
Abstract: The study aims to identify the influencing factors affecting labor productivity, measure its impact level and ranking of these factors using Relative Important Index. Also, certain measures are suggested for enhancing labor productivity at worksite. Five categories and twenty-eight factors affecting labor productivity were identified through literature survey. Questionnaire survey was also conducted to assess the factors influencing labor productivity at worksite and the same was evaluated through five point …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 1, 2021 · pp. 1–9 Read article
-
Noise Sources, Exposure, health effects and Control in Iron & Steel Foundry
Abstract: Foundries are one of the oldest industries and the most basic of all metallurgical processes, with two main procedures performed in a foundry: molding and metal casting. Workers are exposed to a wide range of hazardous compounds in the workplace due to the variety of materials and procedures performed in this industry, which can lead to chronic exposure to hazardous substances (physical and chemical). Noise is a major physical hazard …
Published in Journal of Industrial Safety Engineering · Vol. 8, Issue 2, 2021 · pp. 20–28 Read article
-
Evaluation of the Impact of Organizational and Human Factors on Employee’s Behavior in a Petroleum Refinery
Abstract: According to the WHO, 2.9 billion workers worldwide are exposed to different hazards at workplace. Researchers have focused a lot of emphasizes on work-related illnesses, fatalities, and injuries, which has raised awareness of event causation in the workplace. It is speculated that workers' at-risk behaviors, which can be decreased through behavior modification, are what lead to the bulk of workrelated accidents. A study was conducted to analyze the organizational and …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 2, 2022 · pp. 11–16 Read article
-
COMPARATIVE ASSESSMENT OF FIRE RESISTIVITY OF WALLING MATERIALS IN ONITSHA MARKETS IN NIGERIA
Abstract: Nigeria has been facing the problem of frequent fire outbreaks in markets and they are very regular in Onitsha markets in Anambra State. To minimise this problem, a research was conducted on the three major markets in Onitsha with the aim of comparatively assessing the fire resistivity of their walling materials, so as to generate guidelines for designing walls of market buildings in Nigeria. The research employed desktop study as …
Published in Journal of Industrial Safety Engineering · Vol. 9, Issue 3, 2022 · pp. 20–25 Read article
-
Transforming Waste into Construction: Innovations in Plastic-Soil Brick Production
Abstract: This study aims to develop an eco-friendly alternative building material by incorporating waste plastic and quarry dust into the production of plastic-soil bricks. Plastic waste, particularly polyethylene terephthalate (PET), is utilized alongside laterite quarry waste and M-sand, supplemented with bitumen and gypsum. Experimental results demonstrate that plastic bricks exhibit superior compressive strength and lower water absorption compared to conventional clay bricks. For instance, plastic bricks with 70% plastic content by …
Published in Journal of Industrial Safety Engineering · Vol. 10, Issue 3, 2023 · pp. 14–20 Read article
-
Fracture Characterization of Glass-Sheep Wool Fabric Reinforced Epoxy Hybrid Composite using Stacking Sequence
Abstract: AbstractFibre-reinforced composites are advance market share in structural applications, but further growth is restricted by their lack of toughness. Fibre hybridization is a hopeful approach to toughen composite materials. By combining two or more fibre types, these hybrid composites offer a better balance in mechanical properties than non-hybrid composites. The research and advancement in the area of natural fiber composites (NFC) are gaining more importance due to its eco-friendly, biodegradable, …
Published in Journal of Instrumentation Technology & Innovations · Vol. 8, Issue 3, 2018 · pp. 8–14 Read article
-
Nanostructured Cr-WS2 Solid Lubricant Coating for Space Applications
Abstract: Abstract Tungsten disulphide (WS2) is one of the widely used intrinsic low friction materials, which is commonly used in the form of coating. WS2 offers very low coefficient of friction only in non humid conditions. Presence of humidity destroys this property and restricts its utility. Modifying the structure of WS2 by adding certain metals helps in overcoming this limitation and in addition improves the mechanical properties. Further, deposition technique and …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 12–18 Read article
-
Modelling and Simulation DFIG based Wind power generator System
Abstract: AbstractThis system allows a variable speed operation over a large range. The converter compensates the difference between the mechanical angular frequency and grid frequency by injecting a rotor current with a variable frequency. Both during typical activity and deficiencies the conduct of the generator is in this manner administered by the power converter and its controllers. The power converter consists of two converters, the machine-side converter and grid-side converter, which …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 3, 2019 · pp. 1–7 Read article
-
Review on Generation Sources of Electrical Power
Abstract: AbstractElectricity generation is the progression of creating electric power of bases of primary energy. Designed for utilities from the electric power industry, it is the step prior to its delivery to end operators (transmission, distribution, other) or its storage (consuming, like the pumped-storage process). Electric energy is generated via the movement of electrons, often termed "current," via a conductor, like a wire. The sum of electric energy generated be determined …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 3, 2019 · pp. 8–15 Read article
-
Contract and Feature Extraction of CBIR Method Using Soft Computing Techniques in Machine Learning
Abstract: There is expansion in size of picture securing and information capacity strategies and furthermore there is expansion in data set of pictures. Prior text-based depiction and manual comment of pictures were utilized for recovery of pictures that was a tedious errand. The need of great importance is to deal with the huge assortments through proficient frameworks called content-based picture recovery frameworks. For this situation visual items in the picture like …
Published in Journal of Instrumentation Technology & Innovations · Vol. 12, Issue 1, 2022 · pp. 17–26 Read article
-
Cryptocurrency Price Prediction Using Python and ML
Abstract: Predicting the price of crypto currencies is one of the popular case research in the information technological know-how community. Over the last two years, geopolitical and economic problems have risen, global currency values have fallen, stock markets have slumped, and investors have lost their wealth. This has created a new interest in digital currencies. Cryptocurrencies, one of the most well-known digital currencies, are in the limelight as investors want some …
Published in Journal of Instrumentation Technology & Innovations · Vol. 12, Issue 2, 2022 · pp. 36–41 Read article
-
Optimization of Process Parameters in Wire EDM of HCHCrD2 using RSM-based Multi-objective Genetic Algorithm
Abstract: While precision is of paramount importance in machining of high strength conductive materials, Wire Electrical Discharge Machining (WEDM) is preferred. In the present work, experimental study has been carried to identify the appropriate process parameter settings for wire electrical discharge machining of high carbon high chromium D2 steel (HCHCrD2). The process parameters such as pulse peak current, pulse duration, pulse-off time, wire feed, wire tension and flushing pressure are considered. …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 1, 2018 · pp. 6–10 Read article
-
A Study on Chatter Marks in Crankshaft Pin Grinding Process Using Taguchi Technique
Abstract: Crankshaft pin grinding is a vital machining process in automotive industry. It is a finishing operation to the crankshaft of the engine, which if neglected could lead to a significant cost to the manufacturer of warranty claims. The study aims at identifying significant process parameters that are influencing the chatter marks and also setting the process parameters of the machine to get a good quality product. Chatter marks are the …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 1, 2018 · pp. 1–5 Read article
-
Optimization of WEDM Process Parameters Using a Hybrid Multi-Criteria Decision Making Approach
Abstract: The effectiveness of the manufactured parts is typically measured by more than one performance characteristics. Hence the manufacturing engineers frequently experience the difficulty in optimizing the multiple responses at a time. The present work is to explore the effect of wire electrical discharge machining (WEDM) process parameters in machining of Aluminum metal matrix composite (AMMC). The multiple performance characteristics of material removal rate (MRR) and surface roughness (Ra) are optimized …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 3, 2018 · pp. 24–30 Read article
-
Effect of welding speed on aluminium alloy(2024) to copper welded joint produced by friction stir welding
Abstract: Friction stir welding has a very high importance in the field of thermomechanical processing. The materials which are used to weld by this process are mainly aluminium alloys which are easily available in the market. Since copper has been the material used for decades in the field of power supply due to its good conductivity it is still being used, need and reliability of the joining or connecting the two …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 3, 2018 · pp. 17–23 Read article
-
Experimental Study on the Effect of Nose Radius for Multiple Responses in Turning of EN24 Using Grey Analysis
Abstract: The present work is to study the effect of turning process parameters on the multiple responses of material removal rate (MRR) and surface roughness (Ra). The experiments were carried out on EN24 a medium carbon steel which has a wide range of applications in the field of aircraft and automotive and mainly use in components such as gears, shafts, studs and bolts, connecting rods, propeller or gear shafts and aircraft …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 3, 2018 · pp. 10–16 Read article