Journal of Instrumentation Technology & Innovations
Modelling and Simulation DFIG based Wind power generator System
Abstract
AbstractThis system allows a variable speed operation over a large range. The converter compensates the difference between the mechanical angular frequency and grid frequency by injecting a rotor current with a variable frequency. Both during typical activity and deficiencies the conduct of the generator is in this manner administered by the power converter and its controllers. The power converter consists of two converters, the machine-side converter and grid-side converter, which are controlled independently of each other.Keywords: DFIG, Wind Parameters Modelling, VSC, RSC, PMSGCite this ArticleMegha Kharkhate, Ashish Kumar Singhal. Modelling and Simulation DFIG based Wind power generator System. Journal of Instrumentation Technology & Innovations. 2019; 9(3): 1–7p.References (27)
- “Worldwide energy report,” Conf. World wind energy Renew. Energy Exhib. , WWEA, Cairo, pp.6-8, 2010.
- “Global wind Re port: Annual market update,” Global Wind Energy Council, pp.18-19, 2010.
- A. D. Hansen, L. H. Hansen, “Market penetration of wind turbine concepts over the years,” European Wind Energy, EWEA, vol. 10, pp. 81-97, 2007.
- R. Pena, J. C. Clare, G. M. Asher, “Doubly fed induction generator using back-to-back PWM converters and its application to variable-speed wind -energy generation,” IEEE Proc. Elect. Power Appl. , vol. 143, no. 3, pp. 231-241, 1996.
- S. Soter, R. Wegener, “Development of induction machines in wi nd power technology,” 2007 IEEE International Electric Machines & Drives Conference , 2007. Antalya, Turkey.
- W. Leonard, “ Control of Electrical Drives,” Springer, 3rd Edition. New York, 2001.
- N. Mohan, T. M. Undeland, W. P. Robbins, “Power Electronics: Converters, Applications and Design, ” Clarendon Press, Oxford, UK, 1989.
- S. R. Jones, R. Jones, “Control strategy for sinusoidal supply side convertors,” IEEColloq. Developments in real time control for induction motor drives , 1993 , London, UK.
- G. A. Smith, K. Nigim, A. Smith, “Wind - energy recovery by a static Scherbius induction generator,” IEE Proc. C Generation, Transmission and Distribution. vol. 128, no.6, pp. 317 -324, 1981.
- Jaimala Gambhir, Tilak Thakur, Puneet Chawla, “Modelling and Analysis of DFIG based wind power system using instantaneous Power components ,” International Journal of Electrical and Computer Engineering, 9(8), pp. 908-913 , 2015.
- R. Wu, S. B. Dewan, G. R. Slemon, “Analysis of an ac to dc voltage source converter using PWM with phase and amplitude control,” IEEE Trans. Ind. Elect. vol. 27, no. 2,pp. 355-364, 1991.
- O. S. Ebrahim, P.K. Jain, G. Nishith, “New Control Scheme for the Wind -Driven Doubly Fed Induction Generator under Normal and Abnormal Grid Voltage Conditions,” J. Power. Electron. vol. 8, no. 1, pp.10-22, 2008.
- O. Abdel -Baqi, A. Nasiri, “A Dynamic LVRT Solution for Doubly -Fed Induction Generators” IEEE Trans. Power. Electron. vol. 25, no. 1, pp.193-196, 2010.
- Y. Zhou, P. Bauer, J.A. Ferreira, J. Pie rik, “Operation of Grid -Connected DFIG Under Unbalanced Grid Voltage Condition” IEEE Trans. Energy Conversion., vol. 24, no.1, pp.240 -246, 2009.
- P. Rodriguez, A. Luna, R. Teodorescu, F. Blaabjerg, “Fault ride -through capability implementation in wind turbine converters using a decoupled double synchronous reference frame PLL,” Proc. Euro. Conf. Power Electron. Appl. , 2-5 Sept. 2007. Aalborg, Denmark
- P. N. Enjeti, S. A. Choudhury, “A new control st rategy to improve the performance of a PWM AC to DC converter under unbalanced operating conditions,” IEEE Trans. Power Electron., vol. 8, no. 4, pp. 493–500, 1993.
- A. Nicastri, A. Nagliero, “Comparison and evaluation of the PLL techniques for the design o f the grid connected inverter systems,” Proc. IEEE Int. Symp. Ind. Electron. 2010, Bari, Italy.
- T. Sun, Z. Chen, F. Blabejerg, “Flicker study on variable speed wind turbines with doubly fed Induction Generators,” IEEE Trans. Energy Convers. , vol. 20, no. 4, pp.896-905, 2005.
- M. G. Simoes, B. K. Bose, R.J. Spiegel, “Fuzzy logic based intelligent control of a variable speed cage machine wind generation system,” IEEE Trans. Power Electron., vol. 12, no. 1, pp. 87-95, 1997. Journal of Instrumentation Technology & Innovations Volume 9, Issue 3 ISSN: 2249-4731 (Online), ISSN: 2347-7261 (Print) JoITI (2019) 1-7 © STM Journals 2019. All Rights Reserved Page 7
- F. A. Bhuiyan, A. Yazdani, “Multimod e control of a DFIG based wind power unit for remote applications,” IEEE Trans. Power Del., vol. 24, no. 4, pp. 2079 -2089, 2009.
- O. A. Lara, N. Jenkins, J. Ekanayake, P.Cartwright, M. Hughes, “ Wind energy generation: Modeling and Control ”, John Wiley and Sons, UK, 2009.
- L. Holdsworth, X.Wu, J. B. Ekanayake, N.Jenkins, “Comparison of fixed speed and doubly-fed induction wind turbines during power system disturbances,” IEE Proc. Gen. Transm. Distrib. vol. 150, no. 3, pp. 343–352, 2003.
- R. J. Lee, P. Pillay, R .G. Harley, “D, Q reference frame for simulation of induction motors,” Electric power systems research , vol. 8, pp.15-26, 1985.
- B. K. Bose, “ Modern Power Electronics and AC Drives ,” Prentice-Hall, Inc., New Delhi, 2002.
- F. Blaschke, “The principle of fiel d orientation as applied to the new transvector closed loop control system for rotating field machines,” Siemens Review, vol. 34, pp.217-220, 1972.
- Ashish Kumar Singhal, Rakesh Narvey. Psim and Matlab based Simulation of PV Array for Enhance the Performan ce by using MPPT Algorithm; International Journal of Electrical Engineering. Volume 4, Number 5 (2011), pp. 511-520.
- Ashish Kumar Singhal, Jitendra Singh Kirar. Matlab Based Modelling of PV Array at Different Irrediation Level Using MPPT Technique ; I nt J. of Electronics Communication and Computer Engineering, Volume 4, Issue 1, 2013, 44- 47p. Cite this Article Megha Kharkhate, Ashish Kumar Singhal . Modelling and Simulation DFIG based Wind power generator System . Journal of Instrumentation Technology & Innovations. 2019; 9(3): 1–7p.