Search
669 articles for “structural properties”
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Enhanced Mechanical and Tribological Performance of Magnesium–Boron Carbide Composites Fabricated via Stir Casting for Lightweight Structural Applications
Abstract: This study investigates the fabrication and evaluation of properties of magnesium (Mg) matrix composites reinforced with boron carbide (B₄C) for lightweight structural applications. Stir casting was employed to incorporate B₄C particles at varying weight fractions (0%, 3%, 6%, and 9%) into the magnesium matrix. The influence of B₄C on density, porosity, hardness, tensile strength, and wear resistance was systematically examined. Theoretical density increased from 1.74 g/cm³ (pure Mg) to 1.88 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 29–39 Read article
-
Techniques of Atomic Structure Orbit Potential of The Frequency Characteristics of Silicon Element
Abstract: This study explores the technological applications and material integration of semiconductor materials, with a focus on their electronic properties and practical implementations. The investigation primarily addresses four key objectives: analyzing the electronic band structure and density of states (DOS) of semiconductor materials, evaluating the band alignment in heterojunctions, and integrating these materials into practical technological applications. Using a simplified tight-binding model, we compute and plot the electronic band structure of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 16–32 Read article
-
Synthesis and Evaluation of MgO-Supported Activated Carbon for Carbon dioxide Capture
Abstract: Carbon dioxide (CO₂) capture has emerged as a critical strategy for mitigating greenhouse gas emissions and addressing global climate change. In this study, a series of MgO-supported activated carbon adsorbents containing 2, 4, 6, 8, and 10 wt% MgO were successfully synthesized using the impregnation method to evaluate their CO₂ adsorption performance. The structural, chemical, and surface properties of the prepared materials were characterized using powder X-ray diffraction (PXRD), Fourier-transform …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 3, 2026 Read article
-
Kinetic Analysis of Structural Acrylic Curing by DSC: Polymerization and Phase Transition Optimization
Abstract: Differential Scanning Calorimetry (DSC) was used to analyse the thermal properties and curing behaviour of a structural acrylic adhesive at heating rates of 5, 10, and 15 °C/min. The study focused on the curing kinetics, glass transition temperature (Tg), specific rate (k), and activation energy (Ea) of the polymerization reaction. The material is tested according to ASTM 3418 standards. Results showed that increasing the heating rate shifted the endothermic curing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 726–733 Read article
-
Enhancement of Gas Sensitivity of Composites of Carbon Derived from Rubber Tree and SnO2 to Detect Ethanol Vapor at Room Temperature
Abstract: Films of composites of activated carbon powder prepared from saw dust derived from core of rubber tree (Hevea Brasiliensis) and tin oxide (SnO2) were fabricated using the doctor blade method. Carbon powder was activated using phosphoric acid at 500°C for 45 minutes. The weight ratio carbon/SnO2 varied from 0 to 12% in steps of 2. The structural, optical and morphological properties of films were investigated using XRD patterns, UV-visible spectrums …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 31–44 Read article
-
Polymer Composite-Enabled UAV Platform for Edge AI-Based Precision Agriculture: A System-Level Evaluation
Abstract: This study investigates the system-level role of commercially available polymer composite materials in enabling lightweight and energy-efficient unmanned aerial vehicle (UAV) platforms integrated with edge artificial intelligence for real-time agricultural monitoring. Rather than developing or experimentally characterizing new composite materials, the work evaluates fiber-reinforced polymer (FRP) composites and epoxy-based laminates as enabling structural components whose established properties support UAV performance in precision agriculture. Their high strength-to-weight ratio, corrosion resistance, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 218–240 Read article
-
Polymer Phase Change Materials: Innovations, Applications, and Future Directions
Abstract: Polymer-based phase change materials represent a significant advancement in energy storage and thermal management technologies due to their ability to absorb, store, and release heat during phase transitions. This article reviews recent innovations in polymer phase change materials, focusing on the synthesis, characterization, and performance enhancement techniques. The development of polymer composites with enhanced thermal conductivity, improved phase change enthalpy, and extended thermal cycling stability is discussed. Additionally, the integration …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 11, Issue 2, 2024 · pp. 1–7 Read article
-
Performance Enhancement of Microstrip Patch Antenna Using Metasurface
Abstract: Performance enhancement of microstrip patch antenna using metasurface provides a thorough analysis of how a metasurface integration technique might improve the performance of a microstrip patch antenna. The 4×4 array of square components metasurface measuring 51.6 × 51.6 × 3.1016 mm is merged with the microstrip patch antenna, which has dimensions A=13.5 mm, B=12 mm, and C=1.2 mm. The radiation box dimensions (100 mm × 100 mm × 55 mm), …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 20–27 Read article
-
Synthesis of Lawsonia Inermis (Henna) Carbon Supported AgO Nanocomposite, Characterizations and Photocatalytic Activity Studies
Abstract: Synthesis of Carbon supported AgO nanocomposite is reported for first time. Henna carbon was successfully synthesized from henna leaf. Bare AgO and C-AgO nanocomposites are effectively made using precipitation method. The synthesised composites structural, morphological, and optical properties are assessed using FT-IR, XRD, FE-SEM, UV-DRS, and PL techniques. FT-IR analysis proved that specific functional groups of synthesized materials. The uniform distribution of the composites is revealed in the FE-SEM. XRD …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 749–760 Read article
-
Advancements in Thin Film Coatings for High-Efficiency Electronics and Communication Devices
Abstract: Thin film coatings have become integral to the development of high-efficiency electronics and communication devices, offering enhanced performance, miniaturization, and multifunctionality. This review delves into recent advancements in thin film technologies, focusing on their applications in semiconductors, optoelectronics, and communication systems. We explore various deposition techniques, including atomic layer deposition (ALD), chemical vapor deposition (CVD), and solution-based methods like spin coating, highlighting their impact on device efficiency and scalability. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 2, 2025 · pp. 19–24 Read article
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Nanostructure-Induced Thermoelectric Enhancement in Bi₂Te₃ Nanorods Design, Analysis, and Performance Evaluation
Abstract: Thermoelectric materials capable of efficient energy conversion near room temperature are critical for waste heat recovery applications. In this work, solution-grown Bi₂Te₃ nanorods were synthesized via a trioctylphosphine-assisted thermal decomposition route, and the influence of surfactant-induced nanostructuring on their thermoelectric properties was systematically investigated. Structural analysis using X-ray diffraction and Rietveld refinement confirmed the formation of rhombohedral Bi₂Te₃ with the emergence of Bi₂Te₃–BiTe nanocomposites at higher surfactant concentrations. Electron microscopy …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 34–44 Read article
-
Synthesis, characterization, and antibacterial activity of silver nanoparticles with expired minocycline as reducing agent: proposed as a recycling technique
Abstract: In this research, expired minocycline, a broad-spectrum tetracycline antibiotic, was employed as both a reducing and stabilizing agent for the eco-friendly synthesis of silver nanoparticles. This sustainable method avoids the use of toxic chemical reducing agents, providing a greener alternative for nanoparticle production. The synthesized silver nanoparticles were analyzed using several characterization techniques, such as UV-Vis’s spectroscopy, scanning electron microscopy, transmission electron microscopy, and Edex analysis, to assess their structural, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 30–43 Read article
-
Heavy Metal Removal from Textile Industrial Effluent using Banana Exocarp Derived Cellulose Acetate Graphene Nanocomposite Membranes
Abstract: The disposal of textile effluent is responsible for serious human health concerns and above all environmental concerns to all kind of species. This indicates that there is immediate and urgent need of emerging, efficient with sustainable recycling technologies. In this paper, banana exocarp as agriculture-based waste, in terms of substrate was utilised as major raw material. The extracted cellulose from the substrate with homogeneous acetylation process, transformed into cellulose acetate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 51–62 Read article
-
Semiconducting Materials for Emerging Electronics and Technological Applications
Abstract: Semiconducting materials are important for emerging electronic and photovoltaic technologies because their structural, optical and electrical properties can be tailored for specific device applications. In this study, a TiO₂-based composite photoanode is considered as a polymer-assisted semiconducting thin-film system in which inorganic TiO₂ nanoparticles are processed with organic film-forming components to produce a porous layer for dye-sensitised solar cell application. Nanocrystalline TiO₂ nanoparticles were synthesised from titanium isopropoxide using a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 36–50 Read article
-
Copper Sulfide Semiconducting Nanoparticles for Antibacterial Applications: Synthesis Strategies, Mechanisms and Performance – A Review
Abstract: Copper sulfide nanoparticles (CuS NPs) have drawn growing attention as a next-generation antibacterial platform, owing to their tunable structural, optical, and catalytic properties. This review consolidates current evidence on CuS NP synthesis, mechanisms, and antibacterial performance, comparing chemical and green synthesis routes alongside the effects of morphology, doping, and surface modification. Mechanistically, CuS NPs act through several overlapping pathways, including reactive oxygen species generation, bacterial membrane disruption, ion release, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Modeling of ZnO Based Nano Sensor Device for Evaluating Electronic Interaction with NO2 Pollutant: Combining Multiphysics Simulation and DFT Study
Abstract: This study focuses on the designing and modeling of a sensor device employing zinc oxide (ZnO) nanowires (NWs), and the evaluation of the chemical response of the same in the presence of nitrogen dioxide (NO2), which is an acute harmful pollutant for human health and environment. Experimentally synthesized ZnO nanostructures were used as the basis for modeling of the ZnO NWs based sensor device along with a single ZnO NW, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 211–219 Read article
-
Study of Electrically Conductive Polymer for Antistatic and Sensor Application
Abstract: Electrically conductive polymers (ECPs) are a unique category of smart materials that integrate the mechanical flexibility and ease of processing characteristic of conventional polymers with the electrical conductivity typically associated with metals or semiconductors. In recent years, they have attracted considerable interest due to their promising potential in advanced technological applications, especially in antistatic coatings and electronic sensing devices. The unique ability of these polymers to conduct electricity arises from …
Published in International Journal of Minerals · Vol. 3, Issue 1, 2026 · pp. 46–51 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article