Search
304 articles for “fabrication methods”
-
Heavy Metal Removal from Textile Industrial Effluent using Banana Exocarp Derived Cellulose Acetate Graphene Nanocomposite Membranes
Abstract: The disposal of textile effluent is responsible for serious human health concerns and above all environmental concerns to all kind of species. This indicates that there is immediate and urgent need of emerging, efficient with sustainable recycling technologies. In this paper, banana exocarp as agriculture-based waste, in terms of substrate was utilised as major raw material. The extracted cellulose from the substrate with homogeneous acetylation process, transformed into cellulose acetate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 51–62 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Comparative Analysis of using Rubber isolator and Friction isolator in G+8 Building by SAP 2000
Abstract: Base isolation technique has become most popular that improves resistant quality during a seismic earthquake. These bases seclude moves under high pressure and they soak up an earth tremor smash by minimizing oscillating and trembling of ground. Adaptive base solitude system includes the separation system is Lead Rubber Bearing, Friction Isolators, channel Method, Laminated Rubber Bearing. Base separation is the broadly accepted seismic protected skeleton employed in any edifice in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 479–487 Read article
-
Computational investigation of the influence of process parameters of 3D printed PLA material
Abstract: This study uses numerical simulation to examine the relationship between critical process parameters say, feed rate, layer height, and raster angle, on residual stresses and distortions and on the achievable density of FFF prints to identify the optimal input parameter combinations for ISO 527-2 type 1A. Methods of additive manufacturing that are utilised widely used to manufacture thermoplastic parts is fused filament fabrication. High residual stresses are one of the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 259–269 Read article
-
Advancements in Heat Exchanger Design for Improved HVAC System Efficiency
Abstract: Due to their direct impact on usage of energy, operational effectiveness, and environmental sustainability, heat exchangers have become vital components of the air conditioning, ventilation, and heating (HVAC) systems. The growing demand for energy-efficient HVAC solutions has driven extensive research and development efforts aimed at improving heat exchanger performance. Traditional designs, such as shell-and-tube and fin-and-tube heat exchangers, have long been utilized in HVAC applications. Nevertheless, these traditional types frequently …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 1, 2025 · pp. 44–52 Read article
-
A Comparative Study of the Structure–Property Relationships in CAD/CAM Milled vs. 3D-Printed High-Performance Polymers: Impact of Molecular Orientation on Abrasive-Wear Resistance
Abstract: Background: The transition from subtractive to additive manufacturing in prosthetic dentistry has introduced significant variations in the macromolecular architecture of high-performance polymers. While CAD/CAM milling utilizes high-density, industrially polymerized blocks, 3D printing (Additive Manufacturing) relies on layer-by-layer deposition, which may induce anisotropic molecular orientation. This retrospective study investigates how these distinct manufacturing “thermal histories” influence the long-term abrasive-wear resistance of PEEK and PEKK restorations. Materials and Methods: Data were retrospectively …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 133–140 Read article
-
AUTOMATED MULTIPLE HACKSAW CUTTING MACHINE
Abstract: The significant and prominent manufacturing process that takes place in the industry is cutting. Cutting is an everyday manufacturing process that is used to attain work pieces of desired shape and size. This project is intended to automate the methods of cutting as much as possible. Therefore, this project is all about ideation, design and fabrication of an automated hacksaw machine that can cut four work pieces simultaneously, using four …
Published in Journal of Mechatronics and Automation · Vol. 9, Issue 3, 2022 · pp. 14–26 Read article
-
Effect of silicon carbide on the mechanical properties of the rice husk, corn cob polymer matrix composites
Abstract: Throughout the world there have been alarming concerns over the use of non renewable resources during manufacturing of goods and associated environmental legislations. Therefore, the use of natural materials and fabrication of composites there from, particularly, development of natural fibre reinforced polymer composites is gaining significant attention. Although natural fibre reinforced composites (NFRCs) show strong application prospects, various materials and processing related challenges needs to be addressed to achieve long-term …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 39–45 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Design and Fabrication of an Arduino based Automatic Waste Segregator
Abstract: AbstractToday waste has become one of the biggest problem in the ecosystem due to the way people dispose it. Garbage is usually buried or burnt. These methods of disposal further worsen the state of environment. The solution to this problem can be recycle and reuse. Segregation is the most important step for the waste treatment. Diverse waste materials have to be treated in different ways. It can be segregated as …
Published in Recent Trends in Sensor Research & Technology · Vol. 6, Issue 3, 2019 · pp. 1–5 Read article
-
Flame-Retardant Polymeric Materials: Recent Advances and Future Directions
Abstract: This review explores essential flame-retardant polymers that play a vital role in various industries such as electrical & electronics, automobile, manufacturing, and firefighting. This review also highlights the latest progress in the design and synthesis of flame-retardant polymers, highlighting novel approaches such as the incorporation of nanomaterials, bio-based flame retardants, and the use of intumescent systems. Recent advancements include high-throughput screening, computational design, bio-based and sustainable flame retardants, self-healing materials, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 125–132 Read article
-
Development of Compact RF Filters for Modern Wireless Communication Systems
Abstract: Modern wireless communication systems such as 5G, 6G, Internet of Things (IoT), satellite communication, radar systems, and smart wireless networks require compact and highly efficient RF filters for reliable signal transmission and interference suppression. RF filters are important components that allow desired frequency signals to pass while rejecting unwanted frequencies and noise. With the rapid growth of wireless devices and limited spectrum resources, the demand for miniaturized, low-loss, multi-band, and …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Characteristics of Novel Geopolymer Composites Synthesized from Red Mud and Diatomaceous Earth in Autoclave Conditions without Using Alkaline Activators
Abstract: The geopolymer-based materials have been studied and developed since the last decades of the 20th century and applied in many fields of life. The production of geopolymer also has many different levels of technology from low to high technology which depends on quality and the applied fields of products. The geopolymer composites are also considered as friendly environmentally products related to low energy consumption production technology; reuse industrial wastes as …
Published in Journal of Polymer & Composites · Vol. 8, Issue 3, 2020 · pp. 81–91 Read article
-
Study on the Method of Prediction of Complete Inflation Time of Parachute
Abstract: In general, the parachute test is a long test period, expensive, and difficult to measure with accuracy, which makes it a very laborious and laborious task due to the strong nonlinearity of the fabric of the parachute. Therefore, attempts have been made to overcome this by using a parachute testbed or by simulation, but in our country, there is no numerical simulation of the parachute, and no research has been …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 25–31 Read article
-
Review of Thermal Performance of Solar Air Heaters: Influence of Composite Materials and Advanced Thermal Storage Techniques
Abstract: Solar air heaters (SAHs) are essential devices for capturing solar energy and converting it into heat, finding applications in steam generation, refrigeration, agricultural drying, and space and water heating in residential and commercial environments. However, the thermal performance of SAHs is often limited by the low heat transfer coefficient of air and the absence of solar energy during nighttime, impacting efficiency and reliability. To address these challenges, this study explores …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 488–506 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
An Experimental Investigation of Machining Parameters on Aluminum Composites
Abstract: The need for a material with good mechanical, thermal, and wear resistant properties is satisfied by aluminum composite. However, the biggest obstacle to substituting it with alternative materials is the machining challenges. For this kind of hard-to-cut material, electric discharge machining is a very efficient method. Thus, using a Taguchi-based method, an attempt has been made to determine the most advantageous amount of input parameters for EDM of Al composite. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 8–13 Read article
-
Extraction of Natural Dye from Red Rose Flowers
Abstract: In this research work, locally available red flowers of the red rose are selected for the extraction of anthocyanin. Ethanol solvent was used to extract anthocyanin from flowers. Different methods are used to obtain natural dyes from flowers. FTIR, pH, and UV tests were performed to characterize the extracted anthocyanin. The pH differential method was used to measure the total anthocyanin content in red rose flowers. The color of the …
Published in Research & Reviews : Journal of Herbal Science · Vol. 14, Issue 3, 2025 · pp. 14–23 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article
-
Optimization of Process Parameters for AISI 304 Using Micro-EDM Drilling Process Through Response Surface Method
Abstract: The increasing demand for micro-parts in high-tech products, such as micro-electromechanical systems (MEMS) applications and micro-electronic devices, has driven significant advancements in micromachining technologies. Among the various micromachining processes, the fabrication of accurate microholes and pins is critical for the performance and reliability of miniature components. Micro-hole drilling plays a vital role by enabling the production of deep holes with excellent straightness, roundness, and surface quality. It is widely used …
Published in International Journal of Manufacturing and Production Engineering · Vol. 3, Issue 1, 2025 · pp. 37–47 Read article