Search
1966 articles for “ADMETlab 3.0” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Structural, Mechanical, Electrical and Magnetic Properties of Mn–Zn Substituted Ca-hexaferrites
Abstract: In the present investigation, the samples with chemical composition Ca(CoTi)0.5(MnZn)x/2Fe11–xO19 with (x = 0 to 1.0) have been synthesized using perfect stoichiometric proportions of reacting oxides by standard ceramic technique. The pellets of 15 mm diameter were prepared and sintered at 1313 K in air atmosphere for 106 h and characterized by using XRD and SEM. XRD studies of the samples showed hexagonal magnetoplumbite (M) structure with unit cell dimensions …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 99–111 Read article
-
Physical and Optical Properties of Gum Arabic Sugar doped
Abstract: In this paper a different amount of sugar (0.1, 0.2, 0.3grams) were added to four types of Gum Arabic, namely (hashab, talha, cacamot and neem), then carefully, thoughtfully and thoroughly their physical properties were studied using Ultraviolet-Visible Spectroscopy (UV-Vis) and Fourier Transformation Infrared Spectroscopy (FTIR) devices; referring to the experimental implications, it had been observed and monitored that, the value of energy gap was increasing accordingly, to doping affectedness, and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 38–50 Read article
-
Effect of Time Exposure on Human Blood by Laser Flash Photolysis
Abstract: Diffuse reflectance laser flash photolysis has been used in blood sample to measure transient triplet spectra of free radical or reactive oxygen species (OH, O2, H2O2) generated in free cell systems was investigated using laser flash photolysis and electronic absorption spectra. In all cases, triplet–triplet absorption spectra with the application of this technique to studies concentration of normal human blood sample. The concentration of normal human blood sample is reduced …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 15–20 Read article
-
Analysis of Heavy Metal in Industrial Soil Through Atomic Absorption Spectroscopy and its Relationship with Some Soil Properties
Abstract: The disease of soil is a premise of peril to the strength of individuals at diverse stages as well as towns and urban areas. Overwhelming metals unconstrained as poisonous effluents from smelters are dumped into close by biological system and are connected with wellbeing danger. Modern industrialization is main root to release different overwhelming metals which spreads to the dirt as aero soils, particulate issue, residue, effluents and strong waste. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 29–37 Read article
-
Performance Analysis of Complimentary Pass Transistor Logic Based Multiplexer Using Dual-gate FinFET Technology
Abstract: AbstractThis paper presents the design and analysis of double gate FinFET complimentary pass transistor logic (CPL) multiplexer. The circuit of multiplexer (MUX) using CPL is used for comparison of performance parameters like average power consumption, rise/fall time, delay, slew rate, PDP and EDP. Multiplexer is a digital circuit, it has inputs and select line; select lines are used for select input lines to transfer data to the output end. The …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 1, 2018 · pp. 41–48 Read article
-
BMI and Nutritional Level Classification using Bioelectrical Impedance Analysis
Abstract: AbstractThis paper is based on the study of improve the cutoff point and nutritional classification and status of overweight/obesity based on the EMI. Study was conduct on more than 1000 individual on both genders age between 18 and 60 years. The subjects underwent measurement of weight and height and bioelectrical impedance analysis. Instrumentation for the measurement of bioimpedance is simple, cost effective for mass production and is easy to use. …
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 3, 2019 · pp. 18–27 Read article
-
Response Surface Modelling of Energy Harvester
Abstract: This paper explains the application of response surface methodology on piezoelectric circular disc transducer by considering the three independent variables such as voltage constant, applied force and the total thickness of circular transducer. The dependent variables are voltage and power. For optimizing the voltage and power through energy harvester parameters such as voltage constant, total thickness of transducer plays a main role. The maximum voltage is recorded as 0.161 V …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 1, 2017 · pp. 1–6 Read article
-
Effect Analysis of Different ETL Layer Thickness in Perovskite (CH3NH3PbI3) Solar Cell Using CuSCN as Hole Transport Layer
Abstract: Thickness of Electron Transport Layer (ETL) shows an important role in terms of stability and efficiency of perovskite solar cells. In this paper, numerical simulation and detailed modeling on perovskite solar cell was carried out using perovskite material such as methyl ammonium lead iodide (MAPbI3, MA= CH3NH3) at various thickness’s of ETL layer using the SCAPS tool. The electrical properties of the “MAPbI3 material” used as active layer for different …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Reinforcement of Natural Rubber with Sisal/Sugarcane Hybrid Nanofiller
Abstract: AbstractNatural fibres are attracting attention from researchers for the manufacture of polymer composites due to their eco-friendly nature and sustainability. The hybrid effects of Sisal/sugarcane Bagasse based nanofiller on the physico-mechanical properties of natural rubber matrix have been investigated. In the experiment, nanofiller were prepared from alkaline-peroxide treated sisal fibre and sugarcane bagasse through shear and friction homogenization. The nanofiller were hybridized using a single ordinate loading of 30 parts …
Published in Journal of Polymer & Composites · Vol. 6, Issue 3, 2018 · pp. 35–42 Read article
-
Effect of Nature of Short Fibers/Carbon Black on Curing Characteristics and Physico-Mechanical Properties of Ethylene Propylene Diene Monomer Rubber Composite
Abstract: AbstractIn this research work, ethylene propylene diene rubber (EPDM) composites were prepared by incorporating the various types of short fibers like cellulose, polyester, p-aramid, m-aramid, cotton short fibers and carbon black on a 2 roll mill. The effect of different short fibers content on the curing characteristics and physico-mechanical properties of EPDM composites were studied. When the loading of carbon black was fixed, it was found that carbon black content …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 34–43 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Study of Mechanical and Thermal Properties of Unsaturated Polyester/CuO Nanocomposites
Abstract: AbstractThe CuO nano particles were synthesized from copper sulfate pentahydrate aqueous solution under the low hydrothermal condition at 80°C. The size of the CuO nanoparticles was calculated from TEM. FTIR spectra confirmed the formation of the CuO nanoparticles. Nanocomposites of unsaturated polyester resin with different loading of nano CuO fillers were prepared by casting method. The mechanical properties of the composites such as tensile behavior, flexural behavior, impact strength and …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 35–42 Read article
-
Study of Mechanical Behaviour of Sal Wood Flour based Polypropylene Composites
Abstract: AbstractIn this paper mechanical parameters of polypropylene (PP) and SEBS up to 10 wt% of copolymer are investigated. The PP/SEBS blend with 10 wt% of copolymer is further modified up to 10, 15, 30 and 50 wt% of sal wood. The tensile properties such as modulus, strength, and impact strength are studeid. The effect of salt spray on these properties is also the part of study. The results were found …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 35–38 Read article
-
Test Investigation on Mechanical Properties of Palmyra Bract Fiber Composite
Abstract: AbstractBiological concerns have brought about replenished enthusiasm for regular materials regarding their mechanical applications and principal examination. Recyclability and ecological security are getting to be progressively vital to the presentation of characteristic materials and items. Petroleum based items, for example, gums in thermo set plastics are poisonous and non- biodegradable. The saps and filaments utilized as a part of green composites are biodegradable when they are dumped, disintegrated by the …
Published in Journal of Polymer & Composites · Vol. 3, Issue 1, 2015 · pp. 33–36 Read article
-
Mechanical and Tribological Characterization of CaCO3 and CaSO4 Filled CSM-E-Glass Fiber Reinforced Vinyl Ester Composites
Abstract: AbstractIn this paper, mechanical and tribological behavior of the composites under dry sliding wear of vinyl ester matrix reinforced with chopped strand mat (CSM)-E-glass fiber and fillers CaSO4 and CaCO3 sliding against smooth stainless steel counterface (Ra = 0.07 µm) using Taguchi experimental design has been presented. The effects of sliding velocity (1.57, 2.62 and 3.67 m/s), normal load (20, 40 and 60 N), filler content (0, 10 and 20 …
Published in Journal of Polymer & Composites · Vol. 1, Issue 3, 2013 · pp. 13–31 Read article
-
STUDIES ON MECHANICAL, OPTICAL AND BARRIER PROPERTIES OF LOW DENSITY POLY ETHYLENE WITH MICRO CLAY
Abstract: LDPE (Low density Poly ethylene) was melt blended with micro clay (0.5, 1, 3 & 5 wt%) by using a twin screw compounding extruder. Tubular blown film was taken using a tubular blown film extruder. Mechanical, optical and barrier properties were evaluated. The following trend was observed as the micro clay concentration was increased: The tensile strength was increased by 18% in machine direction (M/D) and decreased by 36% in …
Published in Journal of Polymer & Composites · Vol. 7, Issue 2, 2019 · pp. 23–31 Read article
-
Enhancement of healing capability of polyurethane with Bis-propargyl-succinate
Abstract: This study focuses on a preliminary healing ability consisting of a healing agent (bis-propargyl-succinate, BPS) injected into a curing polymer (glycidyl azide polymer-based polyurethane, GAP-based PU) via “azide-alkyne” click. The preliminary healing behavior of BPS injected GAP-based PU is investigated. The stress at break of BPS injected GAP-based PU is in the range of 0.169 – 0.218 MPa comparing with 0.244 MPa of GAP-based PU, and the highest preliminary healing …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 68–77 Read article
-
Studies on Mechanical, Optical, Barrier Properties and Characterization of LDPE-PLA Blend Films with Micro Clay
Abstract: Low density poly ethylene (LDPE) and Poly lactic acid (PLA) in the ratio of 70:30 wt% were blended along with ethylene glycidyl meth acrylate (EGMA) as compatibilizer (2.5%), benzophenone as photodegradable additive (1%) and microclay (1,3,5%) as filler. Blending took place in a twin-screw extruder and then the resulting blend was processed into a film using blown film extrusion. Mechanical, optical, barrier and degradative properties of film were tested as …
Published in Journal of Polymer & Composites · Vol. 9, Issue 3, 2021 · pp. 56–66 Read article
-
Chemical and Electrocoagulation for Chromium (VI) Removal from Galvanic Effluents
Abstract: Industrial effluents usually contain 10 to 500 mg/l Cr(VI); that according to internationalenvironmental rules must be set at permissible levels before being discharged into the environment.The upper permitted levels of chromium are 0.5 mg/l for effluent discharge and 0.01 mg/l for drinkingwater respectively. Hexavalent chromium is a very toxic heavy metal moiety occurring in variousindustrial wastewaters, such as electroplating, anodizing, tanning and dyeing effluents. Industrialeffluents may contain hundreds of mg/l …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 49–55 Read article
-
An Optimize Formulation to Synthesis of size Controlled Hydrophobic Starch Acetate Nanoparticles using Box-Behnken Design
Abstract: The best way to improve the overall performance of native starch is by chemical modification. In recent years, hydrophobically modified starch has attracted considerable attention for the design and manufacture of novel nanoparticulate drug delivery carriers. The purpose of this research was to synthesize hydrophobic starch nanoparticles (NPs) and to optimize process factors through the use of response surface methodology (RSM). The corn starch acetate (CSA) NPs was synthesized using …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 32–54 Read article