Search
142 articles for “interfacial mechanics”
-
Characterization and Fabrication of Particle Board from Banana Fiber and Sawdust as A Hybrid Composite
Abstract: The current global landscape emphasizes the search for eco-friendly and regenerative materials. Utilizing environmentally available fibers in conjunction with polymeric resins through efficient manufacturing processes offers a cost-effective solution with high-quality standards. Polymer matrix composites with fiber reinforcements possess several advantages, including low production costs, ease of fabrication, and improved material properties, making them applicable in a wide range of industrial contexts. This paper emphasizes the creation of Particle boards …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 192–200 Read article
-
Multi-Layer Aluminum–Polymer Hybrid Structures for Improved Automotive Impact Performance
Abstract: Layered metal–polymer hybrid laminates have emerged as promising candidates for lightweight automotive structures requiring high impact resistance and structural reliability. In this study, aluminum/glass–epoxy hybrid laminates were fabricated using a symmetric stacking sequence through hot compression molding to evaluate their mechanical and energy absorption performance. Density analysis revealed an average measured density of 2.34 g/cm³, closely matching the theoretical value of 2.36 g/cm³, with a deviation of approximately 1.02%, indicating …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 42–53 Read article
-
Recycling and Reinforcement of Retired EV Battery Materials in Polymer Composites for Sustainable Engineering Applications
Abstract: The rapid proliferation of electric vehicles (EVs) has led to a substantial increase in lithium-ion battery waste, necessitating sustainable strategies for material recovery and reuse. This review explores the valorization of retired Electrical Vehicle batteries within polymer and composite systems, highlighting second-life applications as a promising pathway toward circular material utilization. Batteries retaining 70–80% of their original capacity remain suitable for extended use; however, beyond conventional energy storage, their constituent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 362–371 Read article
-
A Hybrid Multi-Physics Ensemble Deep Learning Framework for Simultaneous Prediction of Thermal and Electrical Conductivity in Functional Polymer-Based Nanocomposites
Abstract: Polymer-based nanocomposites have become promising materials for applications in energy storage, flexible electronics, biomedical devices, aerospace components, and advanced engineering because of their tunable thermal and electrical properties. Reliable prediction of these properties is essential for accelerating material design; however, existing analytical models and conventional machine learning techniques often fail to represent the complex interactions among filler characteristics, polymer matrices, processing conditions, and interfacial transport phenomena. This work presents HMEP-Net, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1062–1082 Read article
-
Digitally Tunable Dual-Phase Polymer–PCM Composites for IoT-Based Adaptive Thermal Management in Smart Buildings
Abstract: This study presents the design and development of digitally tunable dual-phase polymer–phase change material (PCM) composites for advanced thermal management in smart building applications. The composite is based on a hybrid polymer matrix comprising thermoplastic polyurethane (TPU) and a crosslinked polyvinyl alcohol (PVA) gel, reinforced with paraffin microencapsulated PCM and hydrated salt PCM to achieve multi-stage thermal energy storage. The polymer composite architecture enables enhanced structural integrity, high encapsulation efficiency …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 147–157 Read article
-
Evaluation of Chemical Application as Pilot to Improve Oil Production from High Viscous Oil in Sandstone Reservoir
Abstract: Chemical injection stimulation is one of worldwide proven technologies for viscosity reduction and mobility enhancement. The principle mechanism is to reduce heavy oil viscosity by injecting of active chemical agent solution into reservoir as huff and buff practice, the agent solution is act at near wellbore area by remove plugging of heavy organic material, Energy support due to large quantity of stimulation liquid being injected into the formation, viscosity reduction …
Published in Journal of Petroleum Engineering & Technology Read article
-
AI-Driven Inverse Design of Functionally Graded Bio-Nanocomposites for Sustainable High-Barrier Packaging
Abstract: Multilayer plastic packaging realizes high barrier performance through laminated heterogeneous structures, but the heterogeneous structure has severe end-of-life challenges caused by the interfacial incompatibility of materials and the poor recyclability. This study proposes the inverse design of functionally graded PLA-nanoclay composite films by reinforcement learning as a monolithic alternative to traditional multilayer systems. Twin-screw extrusion is designed as a continuous control Markov decision process, and proximal policy optimization (PPO) is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1547–1564 Read article
-
Experimental Study on the Tensile Performance of Carbon Fiber Composites Reinforced with Titanium
Abstract: This research investigates the influence of titanium incorporation on the tensile and flexural behavior of carbon fiber‑reinforced polymer (CFRP) composites, with the goal of advancing their overall mechanical performance. This study investigates the effect of titanium incorporation on the tensile behavior of carbon fiber‑reinforced polymer (CFRP) composites to enhance their overall mechanical performance. The work aims to improve the structural efficiency of CFRP laminates by introducing titanium as a filler …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1729–1737 Read article
-
Thin Film Technology in Sensor Manufacturing – A Technical Discussion
Abstract: Thin‑film technology has become the cornerstone of modern sensor manufacturing, enabling the convergence of miniaturisation, multifunctionality, and cost‑effective mass production. This paper surveys the latest advances in deposition techniques—ranging from magnetron sputtering and chemical vapour deposition to atomic‑layer deposition (ALD) and ink‑jet‑printed sol‑gel processes—and examines how their unique material‑control capabilities translate into performance gains across the sensor spectrum (chemical, physical, and bio‑sensing). By integrating nanoscale thickness control (≤ 10 nm) …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 48–58 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article
-
Development and Assessment of Mechanical Characteristics in Sisal-Glass Fiber Reinforced Epoxy Composites
Abstract: In many different fields, including tensile strength, reduced thermal expansion, and an amazing strength-to-weight ratio, fiber-reinforced polymer composites are gradually replacing conventional materials. This work mostly addresses the development and evaluation of the mechanical characteristics of epoxy composites improved with glass fibers and sisal. Among the benefits are biodegradability, lower weight, and more specific strength. Sisal polymer composites are included under natural fiber composites. Including sisal strands into glass fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 708–719 Read article
-
Wear and Tribological Characteristics of Novel Metal Matrix Composites
Abstract: The development of advanced metal matrix composites (MMCs) with enhanced tribological performance has become increasingly important due to the premature failure of critical engineering components operating under severe wear conditions in automotive, aerospace, marine, defense, and power generation systems. Conventional composites such as Copper–Alumina and Aluminium–Silicon Carbide have demonstrated improved mechanical and wear characteristics; however, their widespread application is often limited by issues including particle agglomeration, non-uniform reinforcement distribution, porosity …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1346 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Polymer-Based Transparent Conductive Composites for Flexible Solar Panel Coatings
Abstract: This study investigates the fabrication and characterization of polymer-based transparent conductive composites (PTCCs) tailored for flexible solar panel coatings using poly(methyl methacrylate) (PMMA) and poly(ethylene terephthalate) (PET) matrices reinforced with silver nanowires (AgNWs), multi-walled carbon nanotubes (MWCNTs), and PEDOT:PSS. The composites were synthesized through a solution blending and doctor-blade casting method followed by post-treatments to enhance interfacial bonding and conductivity. Optical transmittance values above 85% were achieved across all composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 99–110 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Ag₂S–Ag Nanocomposites: A Bottom-Up Approach to Enhance Thermoelectric Power Factor at Near Room Temperature
Abstract: The intrinsic ductility, low toxicity, and naturally occurring abundance of silver sulphide (Ag₂S) have made it a potential thermoelectric material in recent years. However, high electrical resistance severely limits its practical application. Here, we present a thorough analysis of how metallic Ag nanoinclusions affect the structural, electrical, and thermoelectric characteristics of Ag₂S nanocomposites made using a simple bottom-up polyol approach. (Ag₂S)₁₋ₓAgₓ nanocomposites with an Ag content ranging from 0 to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 40–55 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Physicochemical Transitions and Polymerization Dynamics in Multi-Generational Dentin Adhesives: A Critical Review of the Resin-Dentin Composite Interface
Abstract: Adhesive dentistry has undergone a transformative refinement over the past three decades, transitioning from technique-sensitive, multi-step etch-and-rinse protocols to streamlined universal formulations. This narrative review critically synthesizes evidence from thirty peer-reviewed investigations to evaluate the evolution of dentin bonding agents from the fourth through the eighth generations. The analysis places particular emphasis on the physicochemical dynamics of the resin-dentin interface, including interfacial bond strength metrics, marginal integrity, and microleakage behavior. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 209–228 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article