Search
692 articles for “composite performance”
-
Assessing the Mechanical, Structural and Thermal Performance of Boehmeria Nivea and Agave Sisalana Fiber Reinforced Polymer Composite by using Seashell Powder as a Filler Material
Abstract: Natural fiber composites have replaced plastics and have been used to the maximum extent. Hybridization of natural fibers with filler materials has achieved higher tensile, impact, and flexural strength compared to single fiber composites. In this research, the mechanical properties were investigated with the ramie and sisal hybrid fiber reinforced with seashell powder as filler material. Filler material can enhance the flexural property of the natural fiber. Hybrid composite plates …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 355–369 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Interfacial Performance and Structural Stability of Repaired vs. Replaced Polymer-Based Composites: A 3-Year Retrospective Analysis of 'Patch-up' Restorative Engineering
Abstract: Objective: This retrospective study aimed to evaluate the clinical longevity and interfacial success of repairing aged polymer-based composites versus complete replacement, focusing on the integration between the existing polymer matrix and the new restorative material. Materials and Methods: A retrospective clinical audit was conducted on 50 cases (n = 50) of posterior restorations with localized defects. The sample was categorized into: Group A (n = 25), where defective sites were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 180–187 Read article
-
Evaluation of Mechanical Properties of Terminalia Chebula and Teak Wood Sawdust Reinforced Polymer Hybrid Composites
Abstract: This study examines the mechanical characteristics of polymer hybrid composites augmented with sawdust from teak wood and Terminalia chebula (Kadukkai). To examine their effects on mechanical performance, the composites were made with different percentages of biofiller (10%, 20%, 30%, 40%, and 50%) while keeping the proportions of the two reinforcements same. Tensile, flexural, and impact tests were performed to assess their strength properties. The findings showed that flexural strength varied …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 469–476 Read article
-
Thermal and Microstructural Evaluation of Natural-Glass Fiber Hybrid Composites: Sustainable Alternatives to Synthetic Materials
Abstract: The scope of engineering requirements for composite materials, which mix features from several elements engaged in engineering applications to enable greater performance, cannot be adequately understood in this way. The most recent of these materials are hybrid composites, which combine synthetic and natural fibers, particularly glass fibers, and are anticipated to create new, promising materials in terms of their ties to cost, performance, and consistency. From the perspective of their …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1275–1285 Read article
-
Alkylimidazolium Chloride Ionic Liquids as Green Additives in Rubber Composites: A Comprehensive Review
Abstract: The growing emphasis on sustainable and environmentally friendly materials has underscored the use of ionic liquids (ILs) as green additives in polymer science. Alkylimidazolium chloride ionic liquids (ACLs) have emerged as viable possibilities for improving the performance of rubber composites while minimizing the environmental impact of conventional processing aids. This research conducts a thorough examination of the function of ACls in rubber technology, focusing on their physicochemical features, interaction mechanisms …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 1–13 Read article
-
Performance Analysis of Biogas Production from Onion Leaves and Cow Dung Compositions
Abstract: Biogas could be obtained from agricultural byproducts; and onion leaves and cow dung is agricultural byproduct abundantly available in Aliero Northwestern Nigeria. This study entails biogas production from onion leaves, cow dung and their mixtures. The onion leaves and cow dung at equal proportions and the sum of their half (Mixture) were poured into three 25 l digesters for experimental investigations. The optimal biogas yields, the component composition of gases …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 16, Issue 1, 2025 · pp. 1–9 Read article
-
Enhancement of Mechanical and Tribological Properties of Aluminum-Titanium Carbide (Al-TiC) Metal Matrix Composites via Powder Metallurgy
Abstract: Metal matrix composites (MMCs) have emerged as a result of the increasing need for sophisticated lightweight materials with exceptional mechanical and tribological qualities. For structural and wear-critical applications, aluminum-based composites supplemented with ceramic particles such as titanium carbide (TiC) have shown great promise. In this work, aluminum-TiC composites made by powder metallurgy a process that guarantees even particle dispersion, regulated porosity, and the creation of near-net shapes are fabricated, mechanically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 366–374 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Thermo-hydraulic Performance of Annular-Finned Double-Pipe Heat Exchanger: Numerical and Experimental Investigation of Metallic and Polymer Composite Tube Wall Materials
Abstract: Double-pipe heat exchangers are central to the process industries — dependable, easily maintained, and straightforward to fabricate. Their conventional form relies on metallic tube materials, most often copper or stainless steel. Both metals conduct heat well, but they are dense, prone to corrosion in aggressive service environments, and increasingly at odds with the light-weighting goals that drive modern system design. Fibre-reinforced polymer composites, epoxy-based materials, and thermally enhanced thermoplastics such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 891–909 Read article
-
Comprehensive Performance Assessment of Silane-Treated Bio-Extracted Husk Fiber Reinforced Composites for Sustainable Construction Applications
Abstract: This research project is an extensive experimental study on bio-extracted husk fiber polymer composites with a focus on silane surface treatment. Bio-extracted rice husk fibers underwent an alkali-enzymatic hybrid extraction process followed by a 3-aminopropyltriethoxysilane (APTES) treatment for improved interfacial adhesion and matrix compatibility. Resin composites with treated and untreated fibers were fabricated with a weight ratio of 10%, 20%, and 30% via hand lay-up methods. A battery of mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 229–241 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Seismic Response Characterization of Vertically Irregular Multi-Storey Buildings Incorporating Mass and Stiffness Variations Using E-TABS Software
Abstract: The increasing demand for innovative architectural designs has led to the widespread use of vertically irregular configurations in high-rise reinforced concrete (RC) buildings. However, such irregularities significantly influence structural performance under seismic loading conditions, leading to complex structural behaviour and stress concentration at specific levels This study focuses on evaluating the seismic behaviour of vertically irregular multi-storey buildings using nonlinear time history analysis, which provides a realistic representation of structural …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 3, 2026 Read article
-
Optimizing MEMS-Based Energy Harvesting with Piezoelectric and Thermoelectric Polymer Composites
Abstract: This research explores the development and performance of polymer-based composites, particularly Polyvinylidene Fluoride (PVDF) and Electro active Polymers (EAPs), in MEMS-based energy harvesting systems. PVDF, a flexible piezoelectric material, is combined with ceramic powders such as lead zirconatetitanate (PZT) to enhance its piezoelectric response while retaining mechanical flexibility. EAPs, including ionic polymer-metal composites (IPMCs) and dielectric elastomers, are investigated for their ability to generate electrical power from mechanical deformations, offering …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 221–237 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Modelling -Based Evaluation of Hybrid Natural Synthetic Fiber Polymer Composites for Sustainable Energy Applications
Abstract: The growing need of lightweight, high-performance, and green energy system materials has increased the research on hybrid polymer composites. This paper gives a modelling-based evaluation of polymer matrix composites which are reinforced using natural fibers like jute, sisal, bamboo in a combination with synthetic glass fibers to be used in sustainable energy sources. An analytical model has been used to assess the effect of hybrid fiber composition on mechanical, thermal, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 682–688 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article