Search
135 articles for “adhesion”
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Mechanical Behavioral Analysis of Sugarcane Bagasse, Coconut Fiber and Kevlar Fiber Reinforced Composite with Micrographs
Abstract: Asbestos and alloys are materials that are frequently used as brake pads; however, because these materials pose risks to human health and the environment, including lung cancer, it is necessary to replace the materials used in brake pads. In place of the current brake pads, composite fibers such as kevlar, sugarcane bagasse, and coconut are studied in this study. The procedure of manually laying up composite molding is used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 282–296 Read article
-
Biopolymer-Based 3D Composite Scaffolds for Bone Tissue Engineering: Photothermal-Responsive Systems with Controlled Pt (IV) Prodrug Release
Abstract: Biopolymer-based composite scaffolds have attracted significant attention as multifunctional platforms at the intersection of polymer science, regenerative medicine, and cancer nanotherapy. In this study, a dual-functional scaffold was developed for simultaneous osteosarcoma treatment and bone regeneration using poly (L-lactic acid) (PLLA) reinforced with bioactive glass (BG) and integrated with a glutathione-responsive platinum (IV) prodrug system (PDA@Pt). To improve interfacial adhesion, photothermal conversion efficiency, and tumor-specific activation, the Pt (IV) prodrug …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 351–361 Read article
-
Design and Performance Analysis of Natural Rubber–Silica Nanocomposite Vibration Isolators for Household Appliances
Abstract: Natural rubber (NR) nanocomposites reinforced with surface-modified precipitated silica (SiO2) were synthesized through a two-roll mill compounding and compression-moulding process, then systematically evaluated as passive vibration isolator materials for domestic washing machine applications. Five silica loadings 0, 5, 10, 15, and 20 phr were investigated. A comprehensive characterization suite encompassing tensile testing, Shore A hardness, dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) revealed clear structure–property …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 554–560 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Recent Developments in Polymer Concrete: Considerations for Materials, Performance, and Sustainability
Abstract: In modern infrastructure Growing need of durability and environmental has driven interest in polymer concrete (PC) as an alternative to conventional cement-based materials. This review critically evaluates recent developments in polymer concrete with emphasis on material innovations, performance characteristics, and sustainability aspects. Demonstration of Advanced polymer binders (e.g. epoxy, polyester and vinyl ester resins) shown significant improvements in mechanical strength, adhesion and chemical resistance. Investigation indicates that use of nanomaterials …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 910–920 Read article
-
Polymer Chemistry Solutions for C&D Waste Stabilization and Reuse in Construction Materials
Abstract: The construction and demolition (C&D) waste is among the largest streams of solid-waste in the world, which has posed significant environmental, economic, and resource utility issues. Common waste disposal techniques such as landfill and low-grade recycling contribute to destruction of the material and wasteful characteristics. Polymers as methods of stabilizing mixed C&D waste and converting it into a high-performance construction material have become one of the promising methods in recent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Effect of machining parameters on the tool wear in drilling of 3D PF C/C composite
Abstract: Carbon–carbon (C/C) composites are broadly used in aerospace, defence, shipbuilding, chemical, and nuclear industries owing to their high strength-to-weight and stiffness-to-weight ratios. However, they are brittle, anisotropic and non-homogeneous in nature, making them difficult to machine. Incorrect machining parameters can cause defects such as burrs, delamination, and fibre bundles pullout. This paper aims to study the hole surface and tool wear during drilling of 3D pierced fabric (PF) carbon-carbon (C/C) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 269–281 Read article
-
Generative Design of Bioactive Orthopedic Composites for Fracture Repair Using an Integrated Conditional GAN–Transformer Framework: A Multi-Objective Approach
Abstract: Orthopedic composite implants for fracture repair must simultaneously satisfy conflicting mechanical and biological demands: high fracture toughness, sufficient compressive stiffness, and bioactive surface chemistry enabling osteoblast adhesion and mineralization. Existing design approaches rely on trial-and-error experimentation, yielding sub-optimal trade-offs between these objectives. This paper presents an integrated conditional Generative Adversarial Network–Transformer (cGAN-T) framework for fully computational, multi-objective generative design of hydroxyapatite (HA)-reinforced polymer composite microstructures targeting Orthopedic fracture repair. A …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 21–35 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
Anti-Soiling Coating Technologies for PV Panels Under Dust Storm Conditions
Abstract: Background Deployment of photovoltaics (PV) in arid and semi-arid areas where there is ample sunlight has been increasing quickly because of their great solar irradiation. The rising number of dust storms, as well as depositing particulate matter to the air, have caused a significant decrease in energy production due to reduced transmittance of light through the surface of the PV panel from the dust on the panel’s surface. This has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 2, 2026 · pp. 26–36 Read article
-
Cardanol Glycidyl Ether in Advanced Materials: Recent Progress, Synthetic Strategies, and Future Perspectives
Abstract: Cardanol glycidyl ether (CGE), a bio-based precursor and epoxy derived product has been emerged as a promising sustainable alternative to conventional petroleum-based epoxy materials. Due to the presence of a phenolic hydroxyl group and an unsaturated aliphatic side chain, cardanol can be effectively undergoes glycidylation to produce reactive epoxy monomers that has excellent flexibility, hydrophobicity, low viscosity, and notably good chemical resistance. In recent years, CGE-based systems have attracted remarkable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Dynamic Analysis of Honeycomb Sandwich Laminated Composite Plate using ANSYS
Abstract: A structural sandwich is a peculiar form of a laminated composite comprising of a combination of distinct materials which are bonded together to use effectively the properties of each separate component to the structural advantage of the whole assembly. Two thin, rigid and quite strong faces in the framework are partitioned by a thick, light and weaker core. The faces are attached adhesively to the core to ensure effective load …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Flexural Response and Numerical simulation of Unidirectional Areca–Pineapple Leaf Fiber Hybrid Epoxy Composites
Abstract: The increasing demand for lightweight and environmentally sustainable materials has accelerated the development of natural fiber-reinforced polymer composites for engineering applications. In the present study, unidirectional areca and pineapple leaf fiber (PALF) reinforced hybrid epoxy composites were fabricated using a simple hand lay-up process. Before fabrication, the fibers were chemically treated to improve fiber–matrix adhesion and enhance the mechanical performance of the laminates. Four different stacking sequences (A8, A7P1, A6P2, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Self-Healing Structural Polymer Composites Incorporating Bio-Inspired Nanofillers
Abstract: Self-healing polymer composites become an attractive family of intelligent materials that are capable of autonomously repairing damage, which will enhance their durability, reliability and service life in extreme engineering applications. The materials are based on the principles of nature, using the nanofillers that are derived from biological systems to improve mechanical properties and self-healing capabilities by utilizing hierarchical structures and multifunctional interface interactions. The recent developments on the formulation of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article