Search
1934 articles for “RMSE of 0.052” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Dynamic Characteristic of Permanent Magnet Assisted Self Excited Synchronous Reluctance Generator
Abstract: AbstractThe use of self-excited synchronous reluctance generator is gaining interest due to its simplicity and inexpensiveness in terms of manufacturing. The problem of this machine which is best suited in a standalone application is that it has poor power factor. This paper presents a comparative study of a PM assisted synchronous reluctance generator with a regular reluctant generator. The machine was studied using rotor rotating frame and embedded MATLAB was …
Published in Journal of Instrumentation Technology & Innovations · Vol. 10, Issue 1, 2020 · pp. 1–11 Read article
-
Optimization of Multiple Responses in Turning of AA7075 Using Taguchi’s Quality Loss Method
Abstract: The present work is to explore the affect of turning parameters, speed, feed and depth of cut on the multiple performances of Material Removal Rate and Surface Roughness characteristics. AA7075 is considered as the work piece as it has extensive applications in the field of aerospace and marine sectors. The experiments are carried out using tungsten carbide tool of 0.4 nose radius and as per the standard Taguchi’s L9 Orthogonal …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 1, 2018 · pp. 31–37 Read article
-
Experimental Study on the Effect of Nose Radius for Multiple Responses in Turning of EN24 Using Grey Analysis
Abstract: The present work is to study the effect of turning process parameters on the multiple responses of material removal rate (MRR) and surface roughness (Ra). The experiments were carried out on EN24 a medium carbon steel which has a wide range of applications in the field of aircraft and automotive and mainly use in components such as gears, shafts, studs and bolts, connecting rods, propeller or gear shafts and aircraft …
Published in Journal of Mechatronics and Automation · Vol. 5, Issue 3, 2018 · pp. 10–16 Read article
-
Design of Pressure Vessel as Per ASME Standard and its Thickness Optimization
Abstract: The main aim of that paper is design of pressure vessel as a storage tank. Design and calculation considering as per ASME (American Society of Mechanical Engineering) standard code. Internal design pressure of vessel 3.6 MPa that pressure more than 100 psi pressure so all calculation considering ASME section VIII, division 2. Vessel internal radii 650 mm and calculated thickness 22 mm. analysis of vessel operating pressure 2 MPa at …
Published in Journal of Mechatronics and Automation · Vol. 6, Issue 1, 2019 · pp. 23–30 Read article
-
Design and Analysis of Microstrip Band Stop Filter with Modified Circle and Dumbbell Shape Ground Structure
Abstract: In this proposed paper the performance of Band stop filter with modified ground structure is analyzed in this specific work; the modified ground structure includes a circle and dumbbell etched shapes in ground plane. Parameters of the proposed configuration were calculated at the cut off frequencies of f1=1 GHz, f2=1.62GHz and also proposed designs having substrate height of 1.6 mm, loss tangent of 0.02 and dielectric constant of 4.4. Results …
Published in Journal of Microwave Engineering and Technologies · Vol. 2, Issue 2, 2015 · pp. 26–31 Read article
-
An Experimental Study on the Effect of Tensile Properties and Hardness of AA6082-T6 under the Heat Treatment Conditions
Abstract: AbstractIn the present study, the experiments were performed to investigate the effect of heat treatment parameters viz. soaking time and temperature on the tensile properties and hardness of Aluminium alloy (AA) 6082-T6 sheet. The sheet was heat treated and cut the standard tensile specimen ASTM E8M-04tofind out the tensile properties and hardness value at different temperature with respect to different soaking time. Air circulation oven type electric furnace was used …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 3, 2018 · pp. 36–41 Read article
-
Surface roughness prediction in the turning operation by using experimental results and equation.
Abstract: This paper was discussed the values of surface roughness prediction models for turning EN24/817M40T steel (277 BHN) by using equation and experimental results. A factorial design technique has been used to study the effects of the main cutting parameters such as cutting speed, feed, and depth of cut, on surface roughness. The tests have been carried out using uncoated.A first-order prediction model within the speed range of 80-180 m min-1 …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 1, 2019 · pp. 27–30 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Parametric Optimization of Tool Wear Rate in Side Flushing form of Die Sink EDM of EN-31 Die Steel
Abstract: Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal processes for manufacturing geometrically complex or hard material parts that are extremely difficult to machine by conventional machining process. EDM researchers have concentrated on achieving faster and more efficient metal removal rate coupled with a reduction in tool wear and improved surface characteristics. In this paper, the operating performance measures of side flushing type of electrical …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 72–80 Read article
-
Structural, Mechanical, Electrical and Magnetic Properties of Mn–Zn Substituted Ca-hexaferrites
Abstract: In the present investigation, the samples with chemical composition Ca(CoTi)0.5(MnZn)x/2Fe11–xO19 with (x = 0 to 1.0) have been synthesized using perfect stoichiometric proportions of reacting oxides by standard ceramic technique. The pellets of 15 mm diameter were prepared and sintered at 1313 K in air atmosphere for 106 h and characterized by using XRD and SEM. XRD studies of the samples showed hexagonal magnetoplumbite (M) structure with unit cell dimensions …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 99–111 Read article
-
Study on Hot Working Characteristics and Deformation Response of as Cast AZ91 Mg Alloys
Abstract: The deformation response of magnesium alloy AZ91 was investigated by means of hot compression tests. The flow curves were obtained in the temperature and strain rate range of 300–500°C and 0.001–1 s-1, respectively. The processing maps of the studied material were obtained by interpreting them on the basis of the dynamic material model. The activation energy maps were developed based on Lyapounov’s function and the safe processing zones were confirmed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 112–122 Read article
-
Investigation on pitting corrosion rate of Micro Plasma Arc Welded Titanium (Ti-6Al-4V) alloy sheets in KBr solution using TOPSIS
Abstract: Titanium is having good anti-corrosion properties in both basic and acidic medium. However, when it is subjected to severer heating processing like welding, there is a possibility of corrosion formation at the weld joint. In the present work Pulsed current MPAW is used for joining 0.5 mm thick Titanium (Ti-6Al-4V) alloy sheets. Peak Current, Base Current, Pulse Rate and Pulse Width are considered as input parameters and fusion zone corrosion …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 37–53 Read article
-
Analysis of Heavy Metal in Industrial Soil Through Atomic Absorption Spectroscopy and its Relationship with Some Soil Properties
Abstract: The disease of soil is a premise of peril to the strength of individuals at diverse stages as well as towns and urban areas. Overwhelming metals unconstrained as poisonous effluents from smelters are dumped into close by biological system and are connected with wellbeing danger. Modern industrialization is main root to release different overwhelming metals which spreads to the dirt as aero soils, particulate issue, residue, effluents and strong waste. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 2, 2021 · pp. 29–37 Read article
-
Computational Modeling on Behavior of Annular Stone Column with Variation of Parameters in Stratified Soils
Abstract: Many studies made reports on the soft soil improvement by the application of stone columns.Ordinary stone columns are installed by vibro-replacement method in the field to be get compacted. The material requirement will be based on diameter of column and encasement around the column can be provided to get more loading ability. In this study, the modification of stone column by changing its structure from solid stone column to hollow …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 3, 2022 · pp. 9–17 Read article
-
Characterization of a Single-Ended Schmitt-Trigger based 9T SRAM Cell
Abstract: Data stability is a prime concern in submicron regime. This work presents a single-ended Schmitt- trigger (ST) based 9T static random-access memory (SRAM) cell. Proposed design provides enhanced read stability as it uses ST based inverters. Low power dissipation is achieved by employing just a single bit line. Simulation is carried out on gpdk 180nm CMOS technology on Cadence. Proposed design offers 1.36x improvement in read static noise margin (RSNM) …
Published in Journal of Microelectronics and Solid State Devices · Vol. 6, Issue 2, 2019 · pp. 26–31 Read article
-
Response Surface Modelling of Energy Harvester
Abstract: This paper explains the application of response surface methodology on piezoelectric circular disc transducer by considering the three independent variables such as voltage constant, applied force and the total thickness of circular transducer. The dependent variables are voltage and power. For optimizing the voltage and power through energy harvester parameters such as voltage constant, total thickness of transducer plays a main role. The maximum voltage is recorded as 0.161 V …
Published in Journal of Microelectronics and Solid State Devices · Vol. 4, Issue 1, 2017 · pp. 1–6 Read article
-
Criticality Risk Assessment during Transportation and Storage of MTR Spent Fuel Elements
Abstract: Abstract This study aims to evaluate the criticality condition during transporting the spent fuel elements from the temporary storage to the permanent storage by using a Latin American cask. The cask was developed to transport the material testing reactor (MTR) fuel element type. MCNP5 code was used to calculate the criticality, expressed in terms of the neutron multiplication factor (k-effective), for normal and accidental situations using 21 fresh fuel elements. …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Hazards of Power Production-A comparative study
Abstract: Nuclear energy has played a major role in reducing the world's use of oil for electricity generation over the past decades. Current estimates are that uranium resources will last some 400 to 500 years at the present rate of use. This resource base could, furthermore, last some 50 times longer if breeder reactors are introduced. Of the main energy sources, namely coal, hydro and nuclear, nuclear can be even considered …
Published in Journal of Nuclear Engineering & Technology · Vol. 11, Issue 1-2, 2021 · pp. 1–20 Read article
-
ISOLATION OF CELLULOSIC NANOPARTICLES FROM COIR FIBRE FOR THE PREPARATION OF NATURAL RUBBER COMPOSITES
Abstract: Coir fibre and natural rubber are renewable and sustainable agro-resources that can be harnessed for the production of finished rubber articles on industrial scale. In this research, coir fibres extracted from coconut husk were subjected to alkaline-peroxide delignification. The delignified fibres were further transformed into coir fibre cellulosic nanoparticles (CFNP) with particle size distribution of 68–311 nm and a polydispersity index (PDI) of 0.371 through friction homogenization. These particles were …
Published in Journal of Polymer & Composites · Vol. 6, Issue 1, 2018 · pp. 9–16 Read article
-
Enhancement of anticorrosion performance on aluminium substrate by novel nanocomposites of PANI/Bi2O3.CO.ZnO/CNT
Abstract: PANI/Bi2O3.CO.ZnO nanocomposites were prepared in presence of bismuth cobalt oxide nanoparticles at 25oC using ammonium persulphate as an oxidant in an in situ polymerisation with aqueous solution of camphor sulphonic acid (SDBS). These nanocomposites were characterized by XRD, FTIR, TEM, UV and SEM. The performance of PANI, PANI/Bi2O3.CO.ZnO nanocomposites and PANI/Bi2O3.CO.ZnO/CNT nanocomposites as anticorrosion protective coating on Al in 0.5 M HNO3 was studied by using potentiodynamic polymerisation technique and …
Published in Journal of Polymer & Composites · Vol. 6, Issue 2, 2018 · pp. 31–41 Read article