Search
152 articles for “load combination”
-
Fluid-Structure Interaction Simulation of Parachute by Eulerian-Lagrangian penalty method
Abstract: In general, modeling and simulation of a model consisting of fluid and solid combinations has been considered difficult, and it has become impossible in terms of computer dependencies and accuracy to be analyzed by Fluent or other programs. The parachute evaluation process, which is historically based on a large amount of experimental data, necessitates many falling experiments. These tests can be costly and time-consuming, and they don't always allow for …
Published in Recent Trends in Fluid Mechanics · Vol. 11, Issue 2, 2024 · pp. 15–22 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Self-Powered Piezoelectric Nano-Polymer Networks with Embedded Wireless Nodes for Distributed IoT Sensor Platforms
Abstract: Self-powered sensing systems are emerging as a promising solution for next-generation distributed Internet of Things (IoT) platforms, where lightweight, flexible, and low-maintenance devices are required for continuous monitoring. In this work, a self-powered piezoelectric nano-polymer network based on poly-vinylidene fluoride (PVDF) reinforced with BaTiO₃ nanoparticles and multiwalled carbon nanotubes (MWCNTs) was developed for flexible wireless sensing applications. The composite was designed to combine mechanical flexibility, enhanced piezoelectric response, and real-time …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Recyclable Vitrimer-Matrix Carbon Fibre Composites for Aerostructures: Reprocessing Efficiency and Retention of Mechanical Performance
Abstract: To begin, carbon fiber reinforced polymers (CFRP) have become an important part of the structural loading in many modern aircraft; however, due to their permanent cross-linking in thermosets, they cannot easily be restored after being retired. Vitrimers have been proposed as a solution since their Covalent Adaptable Networks (CANs), rearranged by associative exchange, may be reshaped, welded, repaired or dissolved without damaging the CFRP fibers. This paper reviews whether the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Seismic Retrofitting of Floating Column Building with Fluid Viscous Dampers and Structural Bracings by using Fast Non-linear Time History Analysis
Abstract: In some of the building structures, even in the newly constructed one, floating columns are used to achieve an aesthetic view or to satisfy the space requirement criteria of building areas like reception lobbies, parking spaces, conference rooms in malls etc. With the use of proper design considerations, buildings built with floating columns, which otherwise are not advised by the codes, can withstand vertical loads, i.e., gravity loads and live …
Published in Journal of Offshore Structure and Technology Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
Recent Advancements and Current Status of Hydrogen Fuel Cells: Materials, Systems, Applications, and Commercialization Prospects
Abstract: In the transportation, stationary electricity, and industrial sectors, hydrogen fuel cells have become a crucial clean-energy technology that can help achieve worldwide decarbonization. Significant progress has been made in catalyst design, membrane engineering, stack architecture, system optimization, and hydrogen generation pathways throughout the last ten years (2018–2025). Platinum group metal (PGM) loading has been significantly reduced, single-atom and transition-metal-nitrogen-carbon (M-N-C) catalysts for oxygen reduction have been developed (Wu et al., …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 2, 2025 · pp. 6–24 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
ML-Enhanced Self-Healing Fiber-Reinforced Polymer Composites with Embedded IoT Sensors for Damage Prediction
Abstract: Fiber-reinforced polymer (FRP) composites are widely used in aerospace and structural systems; nevertheless, the potential for microcracking and fatigue-induced performance degradation remains an obstacle with respect to improved service life. Traditional self-healing methods, while performing well on a chemical level, often lack real-time diagnostic awareness and adaptive control. To circumvent this, we developed a machine-learning augmented self-healing FRP composite, in which a DCPD–Grubbs catalytic matrix was combined with IoT sensor …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 188–208 Read article
-
An Experimental Investigation on the Characterization of Al6061-Polymer Adhesive Joint by Design of Experiment
Abstract: Aluminium alloys and polymers are the light-weight materials extensively used in structural, aero-space, automobile and marine applications. Al6061 alloy and nylon 6 were joined through the adhesive bond and their characteristics were analyzed. However, joining of these dissimilar materials for the evolution of hybrid engineering structures were complex because of their difference in physical, chemical and mechanical behaviours. The Taguchi’s, Design of Experiment were conducted on the various mixture of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 206–219 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Effect of Hybridization on Tensile and Flexural Strengths of Carbon, Glass and Steel Fiber Composites: A Comparative Study
Abstract: Fiber reinforced polymer composites are widely recognized for their high strength-to-weight ratio, excellent corrosion resistance, and design flexibility making them ideal for various engineering applications. Despite their numerous advantages, traditional composites possess significant limitations such as restricted mechanical performance under diverse loading conditions. To address this, hybrid fiber polymer composites are developed while enhancing material performance. In the present study, synthetic (carbon, glass) and metallic (steel) fiber reinforced composite materials …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 621–635 Read article
-
Composite Fabrication by Stir-Cast for Al C355.0 With Particulates Hematite Reinforcements at Different Weight Percentages in Copper Chills with and Without Water Circulation for Mechanical and Fatigue Performance
Abstract: This study investigates the fabrication of aluminum matrix composites using the stir casting method to analyze the mechanical characterization and fatigue behavior of Al C355.0 composites reinforced with varying weight percentages of hematite particulates. The hematite content was systematically adjusted from 0 wt. % to 12 wt. % in 3 wt. % increments, with the presence of constituent elements confirmed through Energy Dispersive Spectroscopy (EDS). The incorporation of hematite reinforcement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 324–336 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Damage Evolution and Delamination Resistance in Polymer Matrix Functionally Graded Laminates
Abstract: Functionally graded laminates (FGLs) in polymer-matrix systems represent a promising pathway to enhance damage tolerance and delay delamination in advanced structural composites. In this study, we explore the mechanisms of damage initiation, propagation, and delamination resistance in polymer matrix functionally graded laminates (PM-FGLs) through a combined experimental–computational approach. Laminates with linear, exponential, and bio-inspired gradation profiles were fabricated using vacuum-assisted resin transfer molding (VARTM) and additive manufacturing techniques. Comprehensive mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 321–337 Read article
-
Material-Integrated Energy Management: Role of Advanced Polymers and Composites in Smart Homes
Abstract: The article discusses the possibility of improving the performance as well as the sustainability of smart-home-based energy management systems (EMS) by applying advanced polymeric and composite materials. Smart homes today are placing greater requirements on lightweight, thermally stable, high durability, and electrically conducting compounds in such important aspects of the devices as batteries, substrate layers in solar panels, thermally resistant enclosures, and high efficiency thermal insulation on intelligent appliances. Such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1361–1374 Read article
-
Next-Generation Biodegradable Polymer Composites: Enhancing Mechanical and Thermal Performance through Green Reinforcements
Abstract: Next-generation biodegradable polymer composites, combining compostable matrices such as polylactic acid (PLA), polyhydroxyalkanoates (PHAs) and starch-based polymers with green reinforcements (e.g., nanocellulose, lignin, agricultural residues and other bio-fillers), offer a pragmatic route to reconcile high performance with end-of-life sustainability. This paper examines recent advances in the design, processing and interfacial engineering of such composites to enhance mechanical stiffness, strength, toughness and thermal stability while preserving—or intentionally controlling—biodegradation pathways. Emphasis is …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1780–1794 Read article