Search
123 articles for “Friction”
-
Experimental Analysis of Wear Characteristics in Natural Fibre Composite Materials
Abstract: In mechanical systems, energy loss and material degradation due to attrition are frequently the consequences of sliding contacts, which frequently lead to premature system failure. In this study, at 50°C, 80°C, and 110°C, the hardness was tested; the results showed that the values were 350.7, 422.5, and 455.5 HV, respectively. After conducting a high-temperature wear test, the mass loss of the as-deposited composite coatings was assessed by an electrochemical approach …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 444–450 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Red Mud Particles' Impact on the Mechanical Properties and Microstructure of AA6005 Composites for Brake Rotor Applications
Abstract: There is increasing focus on utilizing industrial waste as reinforcement in metal matrix composites, driven by the demand for eco-friendly and cost-effective materials in automotive applications. With an emphasis on their possible use in braking rotors, this study examines how red mud particles affect the microstructure and mechanical characteristics of AA6005 aluminum alloy composites. Red mud, a byproduct of the Bayer process, is a good low-cost ceramic reinforcement because it …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 573–581 Read article
-
Comparative Analysis of Disc Brake Using Eco-Friendly Material
Abstract: Brakes are crucial components for slowing or stopping the vehicle. Almost all vehicles use disc brakes. The working of a disc brake is simple; when the brake pedal is pressed, braking pads are forced mechanically against the rotor or disc on both surfaces. The friction generated between the rotor and brake pads slows down the vehicle. The design and materials of disc brakes play a significant role in their performance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 532–544 Read article
-
Numerical Investigation of AA5053 Through Equal Channel Angular Pressing Technique: An Overview
Abstract: Equal channel angular pressing is recognized as the predominant method for bulk severe plastic deformation processing and has been employed for refining the grain structure in numerous metals and alloys. This study utilized finite element analysis to examine the processing of metallic billets through simple shear deformation. For the study, the die channel angle was chosen based on achieving the minimum energy consumption to induce maximum uniform strain. Among the …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 40–47 Read article
-
Energy-Efficient Design Strategies for Sustainable Machine Tool Development
Abstract: The design of energy-efficient machine tools is essential for promoting sustainable manufacturing, as it addresses the significant energy consumption and carbon emissions generated by these tools in industrial settings. This study investigates innovative design approaches that enhance energy efficiency, with a focus on lightweight materials, improved drive systems, smart control frameworks, and methods for recovering energy. Implementing lighter structural materials allows machine tools to operate with less force, which in …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 30–34 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
DC Motor Control using Deep Reinforcement Learning for Enhanced Robustness and Precision
Abstract: DC motors remain the workhorse of industrial automation and mobile robotics, but achieving simultaneous high-speed transient response and negligible steady-state error under variable load conditions continues to challenge classical Proportional-Integral-Derivative (PID) controllers. These model-dependent systems often require extensive tuning and struggle to maintain optimal performance when confronted with parametric uncertainties, non-linear friction, or sudden voltage fluctuations. This study presents a novel, model-free control paradigm utilizing Deep Reinforcement Learning (DRL)—specifically, a …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 3, Issue 2, 2025 · pp. 22–29 Read article
-
Deploying Fuzzy Logic for Self-Tuning Regulator Design for Motion Control in Modern Electrical Machines
Abstract: Modern electrical machines require sophisticated motion control systems capable of adapting to varying operating conditions, load disturbances, and parameter uncertainties. Traditional self-tuning regulators (STR) based on classical control theory often struggle with nonlinearities, time-varying dynamics, and complex operational environments characteristic of contemporary electric drives. This article presents a comprehensive framework for deploying fuzzy logic in self-tuning regulator design to address these challenges in motion control applications. Fuzzy logic controllers leverage …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 3, Issue 2, 2025 · pp. 11–21 Read article
-
Modeling of MHD Hybrid Nanofluid Flow with Radiation and Chemical Reaction Effects for Advanced Composite and Energy Applications
Abstract: Hybrid nanofluids reinforced with polymer-based matrices and nanoparticles have emerged as promising working fluids for advanced composite processing and thermal management systems. Their superior thermo-physical properties enable efficient cooling and energy transport, making them suitable for applications in polymer extrusion, composite curing, thermal insulation coatings, solar energy devices, electronic packaging, and nuclear system cooling. In this study, we investigate the heat and mass transfer behavior of magnetohydrodynamic (MHD) hybrid nanofluid …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 648–660 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 25–36 Read article
-
MHD-Assisted Flow Regulation of Viscoelastic Polymer Fluids for Industrial Cooling and Composite Fabrication with Isotherml Plates
Abstract: This study investigates the magnetohydrodynamic (MHD) regulation of viscoelastic polymer fluid flow over a permeable plate, emphasizing its relevance to industrial cooling and composite fabrication. An incompressible, electrically conducting viscoelastic fluid is analyzed under a transverse magnetic field with Hall and ion-slip effects to capture electromagnetic alterations in polymer transport. The governing non-dimensional equations for momentum, temperature, and concentration are solved analytically using the perturbation method. The results show that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 851–866 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Experimental Investigation into MRR of Polished Zinc Plate with Ultrasonic Vibrations Using Single Pole Magnetic Abrasive Finishing Process
Abstract: The present research examines the material removal rate (MRR) in finishing zinc plates on the experimental framework called Single Pole Magnetic Abrasive Finishing Process (SPMAFP) by inducing ultrasonic vibrations. By means of a Flexible Magnetic Abrasive Brush (FMAB) composed of 40% alumina and 60% iron elements, the investigation estimates the effect of key process parameters on surface finishing excellence. An L-16 factorial study design was applied to examine the FMAB …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 428–438 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Thermal Interaction Analysis Between Flexible Magnetic Abrasive Brush and Aluminium Alloy During Single-Pole MAF
Abstract: Magnetic Abrasive Finishing (MAF) is a precision surface‐finishing approach that employs magnetic abrasive particles (MAPs) within a managed magnetic field to eliminate micro-level material and enhance surface condition. In the finishing process, the friction created between the workpiece and the flexible magnetic abrasive brush (FMAB) leads to heat accumulation, which may badly affect the surface integrity. This study focuses on investigating the temperature distribution at the FMAB–workpiece interface to decrease …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1906–1918 Read article
-
Experimental and CFD Investigation of an Epoxy-Based Thermally Conductive Polymer Composite U-Tube Shell-and-Tube Heat Exchanger: A Lightweight Alternative to Conventional Metal Systems
Abstract: Shell-and-tube heat exchangers continue to play a critical role in industrial thermal systems; however, their conventional design based on fully metallic materials often leads to challenges related to weight, corrosion, and cost. In recent years, thermally conductive polymer composites have emerged as promising alternatives, offering improved corrosion resistance and design flexibility. In this study, the thermo-hydraulic performance of a U-tube shell-and-tube heat exchanger is investigated by partially replacing conventional metallic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 685–700 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
A Study on Fracture Sem Analysis by Optimization of FSW When a Composite Material Al 6061 Mixed with Fly Ash is Done with Cooper Using Anova Method
Abstract: The current study aims to examine how different parameters in friction stir spot welding influence hardness and tensile strength, while identifying the most suitable parameter combinations to enhance the overall quality of the fabricated components. The experimental work involves joining dissimilar materials, where one specimen consists of Aluminum alloy 6061 reinforced with 10% fly ash, and the other is a copper alloy. Various process conditions are altered during testing to …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 1–5 Read article