Search
302 articles for “Composite Fabrication”
-
Bending and Single Edge Notch Bending Test (SENB) Investigation of Natural Fiber- Reinforced Epoxy Composites using Machine Learning
Abstract: The present study aims to determine the behavior of hemp fiber-reinforced epoxy composites in terms of bending behavior and fracture toughness under bending load resembles the substitutive behavior of existing synthetic composites. The fabrication was carried out by hand lay-up assembly of hemp fiber with Lapox-12 epoxy resin volume fraction of 60:40 fiber: matrix volume. Flexural testing revealed an average strength of 93.5 ± 2.8 MPa and SENB testing revealed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 59–69 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Thermally Regulated Polymer-PCM Composites for Efficient Solar Energy Harvesting and Storage
Abstract: This study investigates the development of high-performance; shape-stabilized polymer composites infused with phase change materials (PCMs) for thermal energy storage in solar energy applications. Polyethylene glycol (PEG-6000) was employed as the core PCM due to its high latent heat and suitable melting point, while high-density polyethylene (HDPE) served as the supporting polymer matrix to provide structural stability. One of the primary limitations of PEG-based PCMs is their inherently low thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–163 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
MXene-Infused Conductive Nano-Polymers for Edge-Computing Enabled Flexible Environmental Monitoring Devices
Abstract: MXene-infused conductive polymer composites have emerged as highly promising materials for next-generation flexible environmental monitoring devices because they combine electrical conductivity, mechanical flexibility, analyte sensitivity, and compatibility with low-power electronics. In this work, a Ti₃C₂Tₓ MXene–TPU/PVA conductive nano-polymer composite was developed as a multifunctional sensing platform for edge-computing enabled environmental monitoring. The composite was fabricated by dispersing MXene nanosheets into a thermoplastic polyurethane/poly(vinyl alcohol) (TPU/PVA) matrix, coating the conductive precursor …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Graphene Based Electronic Skin for Wearable Health Monitoring and Human– review on Machine Interaction, Materials, Structures and AI Integration
Abstract: Graphene-based electronic skin (e-skin) has emerged as a transformative technology for next-generation wearable health monitoring and advanced human–machine interaction (HMI). Owing to its outstanding electrical conductivity, mechanical flexibility, atomic-scale thickness, and biocompatibility, graphene enables the fabrication of ultrathin, conformal, and multifunctional sensors capable of mimicking the sensory functions of natural human skin. Over the past decade, research in this domain has progressed rapidly across four interconnected fronts: material synthesis and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Progressive Developments in Cold Metal Transfer Welding Technique: A Review and Trends
Abstract: This comprehensive review paper examines the Cold Metal Transfer (CMT) welding process and its wide- ranging applications across various industries. With a focus on elucidating the fundamental principles, process characteristics, and recent advancements, the paper offers a comprehensive overview of CMT welding's versatility and effectiveness. The review delves into the intricate mechanics of the CMT welding process, highlighting its unique metal transfer modes like CMT-P, CMT advanced, CMT pulse rose, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 235–245 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Microneedles: An Innovative Drug Delivery System
Abstract: Microneedles represent a groundbreaking innovation in drug delivery systems, offering a transformative alternative to conventional hypodermic needles and transdermal patches. This advanced technology combines the precision and efficacy of needle-based delivery with the convenience and pain-free nature of patches, creating a minimally invasive platform that addresses many limitations of traditional drug administration. Microneedles are designed to penetrate the stratum corneum – the skin’s outermost layer – without reaching pain-sensitive nerves …
Published in Research & Reviews: A Journal of Drug Design & Discovery · Vol. 12, Issue 2, 2025 · pp. 60–67 Read article
-
Superplasticity Behavior of Aluminium Alloys Through FSP: A Review
Abstract: Friction Stir Processing (FSP), an advanced modification of Friction Stir Welding (FSW), has emerged as a highly effective technique for fabricating surface composites with superior mechanical and metallurgical properties. FSP enhances the microstructure and superplastic behavior of materials, particularly aluminium alloys, by subjecting them to high strain rates at relatively low temperatures. This review paper critically examines the development and optimization of FSP for aluminium alloys, emphasizing key factors such …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 65–77 Read article
-
Wear Performance of Cylindrical Shaped Alumina Nanoparticles Filled Epoxy Composite
Abstract: Low cost high specific strength epoxy LY 556 and alumina nano filler is utilized in current research for developing a epoxy composite. A liquid dispersion method was adopted for fabricating epoxy alumina composite having 0.50 wt% of alumina reinforcement. For uniform and homogenous dispersion of reinforcement, ultra-sonification of 120 W is adopted. To study the effect of particle behavior, unfilled epoxy and 0.5 wt.% cylindrical alumina oxide filled epoxy composite …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 94–100 Read article
-
Synthesis and Characterization of Forsterite Incorporated HDPE Composites for Microwave Substrate Application
Abstract: High Density Polyethylene (HDPE) combined with dispersed forsterite (Mg₂SiO₄) powder was utilized to fabricate polymer matrix composites (PMCs) aimed at high-frequency microwave substrate applications. Forsterite powders were synthesized using the mixed oxide method, and their phase purity was confirmed by X-ray diffraction (XRD) analysis. The dispersion and morphology of the ceramic filler within the HDPE matrix were examined through Scanning Electron Microscopy (SEM), ensuring a homogeneous distribution essential for optimal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 109–120 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Additive Manufacturing of Polymer-Based Advanced Composites: Mechanical Properties and Performance Evaluation
Abstract: Fabrication of large-scale and geometrically complex polymer-based advanced composites via fused deposition modelling (FDM) has been shown to be a promising technology for the production of such materials, however there are challenges in using short carbon fibre-reinforced polylactic acid (CF-PLA) which include obtaining high mechanical performance and maintaining dimensional accuracy with dynamic robot motion and complex interactions occurring between process parameters. The conventional approaches are mostly static feed rates or …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1326–1335 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article