Search
219 articles for “Alum”
-
A Review on Evolution of Aircraft Fuselage Materials: From Wood to Composites & Functionally Graded Materials
Abstract: This article presents a comprehensive overview of the evolution of materials for construction of aircraft fuselages, with a focus on the expanding use of polymer composites and functionally graded materials (FGMs) in modern aerostructures. The baseline fuselage design is thought to be from wood, to be followed by metallic systems such as aluminum, titanium, and nickel alloys. All systems improved manufacturability, strength, and longevity, but there was a substantial revolution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 447–455 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Relative Study on Design and Analysis of Iron Box using Different Materials
Abstract: In this study, a steady-state thermal analysis of the soleplate is conducted using four different materials(Aluminium, Stainless Steel, Titanium and Ceramics) using ANSYS Workbench. Also, it ensures that the design adheres to safety standards and promotes efficient energy usage while examining heat distribution. In electric irons, the soleplate is the crucial part, so an analysis is done on this part. Also, a change in design was made to increase safety. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
A Comprehensive Review on Red mud as Construction Material and its Utilization for Environmental Advantage
Abstract: These materials can help to further decrease pollution and disposal difficulties when utilized effectively in civil engineering applications. Red mud, a byproduct of converting bauxite into aluminum, collects and occupies an increasing amount of deforested area because of its high alkalinity. With little chance of being used, an estimated redmud of 116 tons are created year globally, posing a major risk of contamination and pollution. However, because they will be …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 35–40 Read article
-
Extraction of Natural Dye from Red Rose Flowers
Abstract: In this research work, locally available red flowers of the red rose are selected for the extraction of anthocyanin. Ethanol solvent was used to extract anthocyanin from flowers. Different methods are used to obtain natural dyes from flowers. FTIR, pH, and UV tests were performed to characterize the extracted anthocyanin. The pH differential method was used to measure the total anthocyanin content in red rose flowers. The color of the …
Published in Research & Reviews : Journal of Herbal Science · Vol. 14, Issue 3, 2025 · pp. 14–23 Read article
-
Design of a Geopolymer Based on Fly Ash and Metakaolin with a Solid, Liquid, and Powdered Alkaline Activator at High Temperatures
Abstract: In this work, the fresh and hardened properties of geopolymer concrete activated using solid, liquid, and powder alkaline activator systems, including fly ash and different amounts of metakaolin, are examined. Compressive and flexural strengths were assessed at 7 and 28 days in accordance with IS 516 (1959). Workability was evaluated using a slump test in accordance with IS 1199 (Part 2): 2018. At an ideal replacement level of 30%, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 712–726 Read article
-
Computational Analysis of Leaf Spring System with Functionally Graded Materials Using ANSYS
Abstract: Leaf springs are important parts of a vehicle’s suspension system, and their main function is to absorb shocks, improve stability, and make the ride more comfortable. Traditionally, ASTM A36 steel is used because it is strong, long-lasting, affordable, and easy to get. However, this type of steel is very dense, which makes vehicles heavier. This extra weight makes the vehicle less efficient and increases emissions. Because of these issues, there …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 380–397 Read article
-
Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA
Abstract: This paper includes the design and thermal analysis of an uncoated & coated IC engine piston made of aluminium-silicon alloy. Thermal analysis is performed on pistons cylinder comprised of aluminium alloys covered with artistic material (Y2O3ZrO2). The bonding is done by unique material (Ni-Cr-Al). Designing is done by appropriate machine design approach and the piston dimensions are determined by finite element analysis (FEA). FEA was performed using ANSYS. The coating …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation Read article
-
Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2
Abstract: In this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. Nanoparticles of Al2O3 and TiO2 were characterized by SEM and EDS. The high peaks showed the respective presence of aluminium, oxygen for alumina and titanium and oxygen for titanium dioxide. The two samples of nano-cutting fluids were prepared. Alpha alumina, α-Al2O3 nanoparticles were used for the preparation of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 329–338 Read article
-
Comparative Energy and Exergy Performance of Box-Type Solar Cookers Using Various Pot Materials
Abstract: This research presents a laboratory study of a box-type solar cooker for two types of pot materials. Under the climate conditions of Jaipur, experiments were carried out on a standard box-type solar cooker using steel and aluminum vessels, either with or without a load. It is estimated what the merit figure (F1 and F2) is. The obtained F1 values show that the cooker, when used with steel and aluminum containers, …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 2, Issue 1, 2024 · pp. 9–15 Read article
-
A Study on Friction Stir Processing Effected on Hardness and Tensile Properties When Single Pass and Double Pass Is Considered Using Al 6061 And Steel Material
Abstract: The principle of friction stir welding was initially employed to build the emerging technology known as friction stir processing, or FSP. FSP has shown to be a successful method of developing face mixes and increasing the material's mechanical parcels. Aluminum blends are among those accoutrements over which the FSP can be performed successfully. The study comprised the careful processing of steel and Al 6061 samples using both single and double …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 16–23 Read article
-
Significance of Composite Materials for Making Better Future Society
Abstract: Since in the beginning of human history, Materials had been started in use. We can't imagine our world without materials. In fact, Materials has taken centre position in many developed and developing countries. The materials that humans have chosen to use for engineering projects throughout history, including the Stone, Iron, and Silicon ages. However, in order to meet today's difficulties, new materials must be discovered and developed with the necessary …
Published in International Journal of Advance in Molecular Engineering · Vol. 1, Issue 2, 2023 · pp. 56–62 Read article
-
Affect of Finite Element Modelling on Static Behavior of Underwater Shell
Abstract: The objective of the present study is to compare and contrast different numerical models based on their mesh quality and material properties in predicting the response of an underwater shell under an external pressure of 1 MPa. Two different mesh qualities with the same element size are developed for solid geometries without and with slicing the solids at geometric discontinuities to enhance the element quality. From the static response of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 154–163 Read article
-
A Review on Characterization of Mechanical Behavior of AA5083 Through Equal Channel Angular Pressing at Different Channel Angles
Abstract: Materials that have been enhanced through traditional techniques like strain hardening, the addition of solutes, altering grain size through precipitation and refining are commonly utilized in industrial applications. However, there is a restriction on the extent of deformation that these traditional techniques can impose on a material. This research centered on examining the primary mechanical characteristics of aluminum alloys when polycrystalline materials incorporate an extremely fine grain size. By producing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 54–68 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
A Brief Review on Interfaces of Copper Welded to Different Materials
Abstract: In engineering applications, three metals with high conductivity are primarily used such as copper (Cu), aluminium (Al), and silver (Ag). Each has its unique set of properties that affect specific engineering applications. Infact the choice of conductor depends on a mixture of cost, technical parameters, and environmental conditions. Among these, Copper is widely valued in engineering applications due to its antimicrobial property, excellent electrical (about 100% IACS) and thermal conductivity, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 25–36 Read article
-
Study of pH Behaviour of Slurry on Surface Morphology of Copper Material with Single Pole Magnetic Abrasive Finishing Process
Abstract: The chemical oxidizers—sodium hydroxide, Marshall’s acid salt, and hydrogen peroxide—were effectively employed in the wet polishing of copper using the SPMAF experimental setup. The manuscript explores preparation of slurry used for polishing copper material using single pole magnetic abrasive finishing (SPMAF) framework. The slurry contains distilled water, 1200-grit aluminum oxide abrasives, sodium hydroxide (NaOH), potassium persulfate (K₂S₂O₈), and hydrogen peroxide (H₂O₂), combined in precise amount. Specifically, 100 ml of distilled …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1887–1896 Read article
-
Influence of Crystallization Time by Hydrothermal Synthesis of Ag NPs-Zeolite Composite
Abstract: Inorganic molecules undergo a chemical reaction that results in the production of a brand-new building material known as geopolymer concrete. Otherwise known as an inorganic aluminohydroxide polymer, geopolymer is made mostly from by-products like fly ash and geologically derived silicon (Si) and aluminium (Al). It is a superior building material for the future because of its great mechanical qualities, significant chemical resistance (attack by magnesium or sulphate), low shrinkage and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 46–51 Read article