Search
1934 articles for “RMSE of 0.052” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
An Experimental Study on Design and Fabrication of Sheet and Tube Type PVT Collector
Abstract: AbstractA hybrid system composed of a photovoltaic (PV) module integrated with a thermal unit is fabricated and tested in outdoor conditions. The system has been installed at MITS, Gwalior and its thermal analysis has been done experimentally. In our experimental work, water is used as a working fluid and pit coarse sand is used as an insulator. Experimentally it is observed that the thermal efficiency of the system is also …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 9, Issue 2, 2018 · pp. 33–38 Read article
-
Design of Absorption and Adsorption Cooling Systems for Truck Cabin Using Exhaust Heat
Abstract: AbstractThe present work is focused towards the review of the work done in the field of automobile air conditioning and design of proposed air-cooling system for the cabin of the truck using waste heat from the exhaust. The present cooling systems run on engine power and consume around 10% of the total power produced by the engine and thereby increase fuel consumption. From heat balance, it is observed that around …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 10, Issue 2, 2019 · pp. 26–34 Read article
-
Catalytic Trends of OsO4 for the Taurine-Bromamine-T Redox System: Kinetic and Mechanistic Chemistry of Catalyzed and Uncatalyzed Reactions
Abstract: Taurine (2-ethane aminosulfonic acid) facilitates as a building block for protein synthesis, also possessing various other vital biological functions. Literature survey revealed that there was no report available on the oxidation of taurine with any oxidants from its kinetic, mechanistic and catalytic aspects. A detailed comparative mechanistic study of its Os(VIII) catalyzed and uncatalyzed oxidation kinetics by bromamine-T (BAT) in NaOH medium at 313 K revealed the rate law to …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 5–19 Read article
-
Comparative Adsorption Studies on Raw Rice Husk, Acid Leached Rice Husk and Base Leached Rice Husk by Using Methylene Blue as Dye
Abstract: Current methods for removing dyes from wastewaters are costly and cannot effectively be used to treat wide range of such wastewaters. This work describes the use of raw rice husk (RRH), acid-leached rice husk (ALRH) and base-leached rice husk (BLRH) as adsorbents for decolorization. Characterization of raw rice was done by powder X-ray diffraction (P-XRD) analysis, surface area analysis and scanning electron microscopy. Raw rice husk was collected directly from …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 1, 2015 · pp. 32–39 Read article
-
Bio-ethanol Production and Heavy Metal Lead (Pb) Removal Using Macro Algae Wolffia
Abstract: This study was aimed to evaluate the potential of using macro algae Wolffia for bio-ethanol production and for heavy metal Lead (Pb) biosorption. Macro algae Wolffia was collected locally from a pond. Pretreatment was given by using 1 and 10% sulphuric acid (H2SO4) to different batches of Wolffia. Fehling’s test was performed to check the presence of sugar. For the fermentation step Saccharomyces cerevisiae strain was used. Yield obtained using …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 3, 2015 · pp. 23–39 Read article
-
Ru(III)-Catalyzed Oxidative Cleavage of Ritodrine Hydrochloride: A Kinetic and Mechanistic Study
Abstract: A systematic kinetic and mechanistic study of the oxidation of ritodrine hydrochloride (RTH) with chloramine-T (CAT) in both HClO4 and NaOH media has been carried out at 303 K. In acid medium, the reaction rate is very sluggish to be measured kinetically. Ruthenium (III) chloride ([Ru(III)]) was found to be an efficient catalyst. The reaction rate exhibits a first-order dependence on [CAT]0 in both media. It shows a fractional-order on …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 29–40 Read article
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Effect of Hooked-end Steel Fibre Incorporation in the Performance of Slag Based Geopolymeric Concrete Mixes
Abstract: In this study the efforts have been undertaken to evaluate the performance of slag based geopolymer concrete (GC) when hooked-end steel fibres have been incorporated in different percentages i.e. 0%, 0.5%, 1.0%, 1.5% and 2.0% to the mix. The alkaline activator used in this study was the dissolution of solid sodium hydroxide flakes in liquid state sodium silicate solution, dissolved in water. The compressive strength, split-tensile strength, shear strength and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 2, 2020 · pp. 28–35 Read article
-
Water Permeability of Hybrid Steel Fiber Reinforced Concrete
Abstract: Results of an investigation conducted to study the water permeability of (HySFRC) are presented. Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations corresponding to 0.5, 1.0 and 1.5% fiber volume fractions. A reference concrete mix containing no fibers was also cast for comparison purpose. A total number …
Published in Journal of Construction Engineering, Technology & Management · Vol. 4, Issue 2, 2014 · pp. 30–37 Read article
-
Performance of High Strength Basalt Fiber Reinforced Metakaolin Concrete
Abstract: The present work deals with the results of experimental investigations on high strength M60 basalt fiberreinforced metakaolin concrete. Effect of these fibers on various strengths of concrete are studied. Fiber contentvaried from 0.5 to 1.5% at an interval of 0.5 by weight of cement. Various strengths considered for investigationare compressive strength, flexural strength, split tensile, and bond strength. Cube of size 100 mm forcompressive strength, beams of size 500 mm …
Published in Journal of Construction Engineering, Technology & Management · Vol. 1, Issue 1-3, 2011 · pp. 15–22 Read article
-
A Study on Tribological Behaviour of Fly Ash Filled Glass Fiber Reinforcement Epoxy Based Composites Using Taguchi Experimental Design
Abstract: Fiber-reinforced polymer composite materials have better corrosion resistance, better wear resistance, reduced weight of structure, good thermal/electrical insulation and conductivity, etc. due to their properties its application field include aircraft, space crafts, automotive, infrastructure, marine, and sporting goods. But a major industrial problem is erosive wear of structure components caused by abrasive particles. Solid particle erosion of engineering/structure components caused due to dusty operational conductions. But, even today, researchers worked …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 1, 2020 · pp. 1–5 Read article
-
Design of Voltage Controlled Oscillator using GDPK 90nm CMOS Technology
Abstract: In the recent decade, there has been a major revolution in communication systems and devices. Many communication devices required a specific frequency which may range from a few Hz to several GHz by source of voltage. Voltage Control Oscillator (VCO) plays a major role in today’s modern communication system. Voltage Control Oscillator use as basic building block in communication circuits and major use in phase locked loops circuits. Due to …
Published in Journal of Electronic Design Technology · Vol. 13, Issue 1, 2022 · pp. 17–24 Read article
-
PV System Performance in Variable Climatic Conditions
Abstract: This paper is focused to the study of the panel temperature operating under different climatic conditions; to this goal a detailed model has been developed to estimate the response of the panel temperature to various scenarios. The model has been designed based on energy balance, where temperature of the panel is estimated applying heat exchange processes with the environment, mainly convection and radiation, considering the effects of ambient temperature, wind …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 11, Issue 2, 2021 · pp. 11–27 Read article
-
TRANSFORMATION OF INHERITED ENGINEERING PROPERTIES OF SOIL DUE TO STUBBLE BURNING - A CASE STUDY
Abstract: Stubble Burning has put the state government as well as central government in deep thoughts. The smoke that emits from the farms comes in contact with the breeze to become smog that collectively moves southward affecting the entire belt of northern India including Delhi. Sometimes it becomes too difficult to breathe and public is forced to use breathing masks to avoid poisonous gas entering into their lungs. Research says inhaling …
Published in Journal of Geotechnical Engineering · Vol. 5, Issue 3, 2018 · pp. 31–36 Read article
-
Improvement of Sand Subgrade Soil Strength with Geogride Reinforcement
Abstract: The quality and life of pavement is greatly affected by the type of sub-grade, sub base and base course materials. The most important of these are the type and quality of sub-grade soil. But in Iraq most of the flexible pavements are needed to be constructed over weak and problematic sub-grade. Flexible pavements constructed on weak subgrade with low California bearing ratio (CBR) are required to increase its total thickness. …
Published in Journal of Geotechnical Engineering · Vol. 3, Issue 1, 2016 · pp. 14–19 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-Woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 44–54 Read article
-
Musculoskeletal Discomfort among Grinders Working in Manufacturing Industry
Abstract: This study aims to assess the work related musculoskeletal discomfort in 94 subjects engaged in grinding task in manufacturing industry. All subjects who participated in this study were males with mean age (SD) of 34.26 (9.67) years and work experience in grinding job ranges from 01–27 years with a mean (SD) of 10.47(7.21). Most of the workers had an education below matriculation (81.9%), out of which 32.9% were devoid of …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 1, 2017 · pp. 10–14 Read article
-
Quality and Metallic Pollution Level in Surface Waters of an Urban Industrialized City: A Case Study of Chittagong City, Bangladesh
Abstract: Disposal of urban and industrial waste is one of the major problems and responsible for both soil and water pollution in Chittagong city, Bangladesh. Total 22 surface water samples were collected from different locations of Chittagong city to assess quality and metallic pollution level. The concentrations of Fe, Mn, Cu, Cr and Pb in water samples ranged from trace- 10.37, trace- 1.91, 0.824–0.999, 0.11–1.32 and 1.69–2.56 µg ml-1, respectively while …
Published in Journal of Industrial Safety Engineering · Vol. 4, Issue 2, 2017 · pp. 9–18 Read article
-
Relative Efficiency of Manufacturing Companies in India Using Data Envelopment Analysis
Abstract: Manufacturing holds a key position in the Indian economy, accounting for nearly 16 percent of the real GDP in FY 12 and employing about 12 percent of the country’s labour force. Growth in the sector has been strong, outpacing overall GDP growth since the past few years. For example, while real GDP expanded at a CAGR of 8.4 percent over FY 05–12, growth in the manufacturing sector was marginally higher, …
Published in Journal of Industrial Safety Engineering · Vol. 2, Issue 3, 2015 · pp. 27–33 Read article
-
Assessing and Ranking Health, Safety and Environmental Risks Through Analytical Network Process (ANP) Method in Cement Plant in 2020
Abstract: In today's competitive world, decision-making and management are based on risk assessment.Accordingly, the present study deals with assessing and managing the risks of Health, Safetyand Environment (HSE) aspects in cement factory through combining three widely usedmethods including FMEA, William and Fine, and EFMEA to determine and estimate the levelof risk, and to control and mitigate this risk using analytical network process (ANP) method.In this research, three ANP models were used …
Published in Journal of Industrial Safety Engineering · Vol. 7, Issue 3, 2020 · pp. 23–35 Read article