Search
1192 articles for “MnCl2.4H2O salt reinforcement”
Nothing matched all of your words, so these match any of them.
-
Response Spectrum Analysis and Comparison of Seismic Parameters ofLow Rise, High Rise and Asymmetrical RC Structure with and Without Infill for Different Bay Dimensions
Abstract: The concrete block walls or brick masonry are widely used as partitions in world wide. Generally the effect of infill walls is not considered in the design process and istreated as non-structural components. The presence of infill walls has vital role in performance of building during earthquakes. Infill panels significantly increase stiffness and strength of the frames. This study provides the comparative study on summary of performance of low rise …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 1–9 Read article
-
Seismic Evaluation of RC Framed Buildings using Performance Based Design
Abstract: Seismic resiliency of new buildings has developed over the years due to enhancements in seismic codes and design practices. Though, existing buildings designed and built under past codes are vulnerable and require a performance-based screening and retrofit prioritizing. Performance based seismic design provides a framework for determining the level of safety and level of property protection in earthquake events with the consideration of uncertainties in the quantification of possible hazard …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 33–41 Read article
-
Damage Assessment and Strengthening of Transmission Line Tower at Component Level
Abstract: The damage assessment and strengthening of transmission tower is an important factor to be considered for life enhancement. The transmission towerdeteriorate due to corrosion and ageing. In this paper, analytical and experimental investigation is carried out at component level on cantilever beam made of square hollow and angle section. The damage is inflicted by reducing the stiffness of the beam. The damage is assessed based on frequency response measurements. The …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 9–15 Read article
-
Seismic Response of Braced RC Elevated Water Tanks for Various Seismic Zones
Abstract: In this paper, a reinforced concrete elevated water tank with a capacity of 500 cubic meters and h/d ratio=0.7 is considered, the present study investigate the performance of elevated water tank using dynamic analysis, i.e., Response Spectrum method. The modeling of elevated water tank is carried out by using finite element base software STAAD.Pro. Total twelve number of model were made for empty tank, half tank and full tank condition, …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 43–64 Read article
-
Analysis of RC Frames Using Different Bracing Systems in Different Positions and Zones
Abstract: Structures are mainly built to enhance the performance of several activities like recreation, transportation, power generation, etc. They are built to sustain the loads coming on them during their service life by carrying adequate strength and also limit the deformation by possessing enough stiffness. Strength of a structure depends mainly upon the characteristics of material with which it is constructed. Stiffness is dependent upon the cross-sectional and geometrical properties of …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 16–27 Read article
-
Analysis of Composite Behavior of Masonry Wall and Supporting Beam
Abstract: Composite behavior of brick masonry wall and supporting beam is outlined through this topic. Masonry in filled reinforced concrete construction is most common in urban and rural areas. The composite behavior of masonry and the supporting beam is neglected in the modern structural design. In the present study, finite element analysis is used for analysis of composite action of wall and supporting beam. Materials are modeled using Macro modeling. The …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 2, 2016 · pp. 20–28 Read article
-
Experimental Investigations of Prestressed Hollow Core Slabs and Grouted Hollow Core Slabs
Abstract: With the advent and rapid inclusion of prefabricated concrete system to the construction industry, it poses interesting research challenges to the academic world. The acceptance of hollow-core slab as an alternative to the normal reinforced concrete solid slabs is getting delayed due to the delusion among public. The usage of grouted hollow core slabs by filling the core with grout is one of the increasing demands observed by the hollow …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 3, 2016 · pp. 16–21 Read article
-
Experimental Investigation of Self-Compacting Concrete Using Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during their usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogenous …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 6–12 Read article
-
Strength and Durability Characteristics of Fiber Modified Asphaltic Bitumen
Abstract: Flexible pavements with bituminous surfacing are widely used in India. Exponential increase in traffic, overloading of commercial vehicles and significant variations in daily and seasonal temperatures have shown some limitations of conventional bitumen performance. Earlydevelopments of distress symptoms like cracking, rutting, raveling, undulations, shoving and potholing of bituminous surfacing have been reported for flexible pavements. Toenhance the properties of road, bitumen is modified by the addition of some waste materials. …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 13–17 Read article
-
Experimental Investigation of SCC Using Glass Fiber
Abstract: An attempt is made to study the effect of glass fiber impregnation in self-compacting concrete; glass fiber which may aggregate together is added as reinforcing agent. Glass fiber was added in concrete 0.25, 0.5 and 1% by weight of cement. The fine aggregate is replaced with manufactured sand (M sand) in various percentages. Glass fiber added increased the compressive strength to considerable value and also it is found that the …
Published in Journal of Structural Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 25–31 Read article
-
NDT Studies on Geopolymer Concrete with Addition of Natural Fibers
Abstract: Modern day construction activities are not proved to be enviro-friendly and most of the building materials we use for the construction purpose consumes lot of natural resources and have huge carbon foot print. Innovations in civil engineering industry is also taking place apart from usage of regular materials, once such innovative material that has potential to reduce the carbon foot print is Geopolymer. In our country the research in Geopolymer …
Published in Journal of Structural Engineering and Management · Vol. 1, Issue 2, 2014 · pp. 5–10 Read article
-
Comparative Study of Design Parameters of Flat Slab, Waffle Slab and Conventional Slab Using Etabs Software
Abstract: Different types of slab systems are conventional reinforced concrete slab which consist of beams and column for load transfer mechanism, Flat slab is that in which beams are not present and the slab is directly rested on the columns, and waffle slab is one in which the combination of deck and a system of equally spaced parallel ribs, having monolithic inter-section, that can be constructed in either orthogonal or skew …
Published in Journal of Structural Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 7–14 Read article
-
Comparative studies of Oxidation and hot corrosion behaviors of uncoated and detonation gun sprayed Cr3C2-25NiCr coating on SA-213 boiler steel at 8000C
Abstract: Fe-based alloys suffer oxidation and hot corrosion when the surfaces were in contact with air (oxidation) as well as the salty atmosphere (Hot corrosion) at elevated temperatures. In these atmospheric conditions, non-protective oxide Fe2O3 was formed on the surface of alloys. Oxidation and hot corrosion have been recognized as a major problem in the applications of the diesel engine, boilers, gas turbines, and chemical power plant etc. Detonation-gun sprayed Cr3C2-25NiCr …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 17–22 Read article
-
Effects of Carbon Fiber on Strength of Concrete
Abstract: Experimental investigations were carried out to evaluate the effect of carbon fibers on strength of concrete. The concrete mix of M-25 grade was considered and produced by replacing carbon fibers with cement. Modified concrete is produced by adding carbon fibers with various percentages as 0 to 0.6% at an interval of 0.2% with 10 and 20 mm in length. The compressive and flexural strengths are considered for investigations. Cube of …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 3, 2016 · pp. 1–8 Read article
-
Performance of Ni3Al and TiO2 Coatings on T91 Boiler Tube Steel in Simulated Boiler Environment at 900°C
Abstract: Boiler steel tube corrosion in coal fired boiler is main subject during design and operation of thermal power plant and it leads to both direct and indirect loss of cost and energy, including losses due to plant shut down time and inefficiency of operation. One of the feasible solutions to solve out this problem is providing surface coating on boiler steel tube, which on one hand protects the tube from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 27–34 Read article
-
Seismic Behavior of RC Elevated Water Tank under the Impact of Liquid Sloshing
Abstract: AbstractIn the present study, a reinforced concrete elevated water tank with a capacity of 500 m3 and h/d ratio=0.7 is considered. The present study investigates the performance of elevated water tank considering the impact of liquid sloshing for partially filled tank i.e. half tank condition. The investigation is carried out by considering different staging arrangement such as cross staging and radial staging. By considering all these parameters, total six models …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 3, 2017 · pp. 21–30 Read article
-
Response Study of High Rise Building under Wind Load
Abstract: Wind is a phenomenon of great complexity because of the many flow situations arising from the interaction of wind with structures. Wind is of the most significant forces of nature that must be considered in design of buildings. The characteristics of wind-induced loads on buildings continuously vary in temporal and spatial dimensions. Adequate design of buildings depends on the success in predicting the actual effects of turbulent wind forces to …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 35–45 Read article
-
Seismic Behavior of RCC Buildings under Revised Seismic Zone Classification by BNBC
Abstract: This study aims at the comparison of provisions of earthquake analysis given BNBC 2017. The revised BNBC 2017 has divided the seismic zones of Bangladesh into four different categories such as Zone-1, Zone-2, Zone-3 and Zone-4 respectively. They have different seismic zone coefficients. Finally structural analysis and design of a typical G+10 storey school building situated in all four seismic zones is conducted to investigate the seismic behavior of that …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 21–28 Read article
-
Design of Openings and Static and Vibrational Analysis of RCC Cellular Beam
Abstract: In concrete arena, RCC cellular beams have less weight compared to solid beams which in turn reduce the weight of columns and footings. All real physical structures, when subjected to loads or displacements, behave dynamically. In this study, we have performed the static analysis and vibration analysis of a three-dimensional reinforced cement concrete cellular beam. The nodal displacements have been found and the stresses are determined. The principal stresses are …
Published in Recent Trends in Civil Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 1–24 Read article
-
Assessment of Construction Waste to Identify Issues that Disrupt Sustainable Development: Case Studies in Sindh, Pakistan
Abstract: Due to intensification of construction works throughout the globe, the construction industry is facing challenges of managing construction waste. Researchers are innovating advanced construction waste management (CWM) techniques that can tackle bulkiness of the waste that remains problematic even after the construction. In Pakistan, a very little research is done to promote effective handling of such wastes. This paper presents the study done at construction sites in Daulatpur, Sindh, Pakistan …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 2, 2017 · pp. 10–17 Read article