Search
1932 articles for “LeNet-5” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
Design of a 10-bit Segmented Current-Steering CMOS D/A Converter for High Speed Communication System
Abstract: In the present work, design of a 10-bit digital-to-analog (D/A) converter using current segmentation architecture in 0.35 µm double-poly, four-metal, CMOS process has been attempted. The measured differential nonlinearity (DNL) and integral nonlinearity (INL) are 0.8 and 2.5 least significant bits (LSBs) respectively. For sampling frequency of 12-MSample/s, the spurious free dynamic range (SFDR) is better than 56 dB for signal up to Nyquist rate. The worst case power consumption …
Published in Journal of VLSI Design Tools and Technology · Vol. 2, Issue 1-2-3, 2012 · pp. 38–43 Read article
-
Analysis and Implementation of Folding and Interpolating Analog to Digital Converter using Submicron CMOS Technology
Abstract: This paper presents folding and interpolating ADC with resolution of 5 bit. The simulation result is carried out using 0.18 μm CMOS process technology with supply voltage 1.8 V. This folding and interpolating ADC consumes less power than other, and it is 10 mW. The rate of conversion is 50 MS/S. So, it is suitable for low power application and medium resolution portable devices. Keywords: Folding ADC, interpolating, ADC, low …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 1, 2017 · pp. 35–40 Read article
-
Performance Analysis and study of losses in GaAs Multi Junction Solar cells using Current and Voltage Measurements
Abstract: Cross section coordinated, triple-intersection sunlight based cells with strain repaid quantum spots (QDs) in the GaAs center cell were developed by Metal-Organic Chemical Vapor Deposition (MOCVD). Structures with various quantities of QD layers are contrasted with gauge structures with no QDs. Quantum proficiency and light I-V estimations show an expansion in hamper thickness and debasement of the open circuit voltage for QD sun powered cells. The QDs don't work on …
Published in Journal of VLSI Design Tools and Technology · Vol. 12, Issue 1, 2022 · pp. 1–7 Read article
-
Constructed Wetlands: An Emerging Paradise for Sustainable Treatment of Wastewater
Abstract: AbstractSufficient supply of water both in terms of quantity and quality has always been a provoking effort mostly across all the developing cities of the world. Situation is nowhere different in India too where past decades have seen a rapid growth in not only industries but urbanization as well and availability of water round the country shows a wide disparity of range from about 80 litres per capita per day …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 1–5 Read article
-
Development of Mathematical Model to Predict Annual Runoff in Port Harcourt City, Rivers State, Nigeria
Abstract: This paper is aimed at monitoring and predicting annual runoff of Port Harcourt city for a classified area type and flat land of 0–5% slope. Mathematical models were developed to monitor and simulate annual runoff of an area type of 30% impervious (paved), 50% impervious (paved) and 70% impervious (paved) within the Port Harcourt city. The analysis of annual rainfall and annual runoff data gives a coefficient of determination of …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 29–36 Read article
-
Floodplain Inundation Modeling and Mapping for Geray River: Nile Basin, Ethiopia
Abstract: Flood is among the most devastating natural hazards in the world claiming lives and properties more than any other natural phenomena. During high flow, the Geray River flooded the vicinity of the area and causes loss of cultivated land and life. The objective of this study describes the flood extent and depth in the Geray River for different flow conditions. This research involves the integration of HEC-HMS, HEC-RAS, and GIS …
Published in Journal of Water Resource Engineering and Management · Vol. 6, Issue 3, 2019 · pp. 25–45 Read article
-
Rainfall-runoff Modeling using HEC-HMS Hydrologic Model for Guder River Watershed, Blue Nile Basin, Ethiopia
Abstract: Rainfall-runoff modeling is important for a number of hydrologic applications including flood forecasting, water resource planning and management. This study presents the result of a watershed rainfall-runoff modeling for Guder river watershed having area of 6597 km 2 using Hydrologic Engineering Center-Hydrologic Modeling Systems (HEC-HMS). The watershed runoff is varying spatially and temporally due to manmade factors and natural factors on the watershed. These issue needs efficient water resource planning …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 62–77 Read article
-
Appraisal of Household Potable Water Accessibility in Sub–Urban Areas of Oyo State: Geographic Information System and Remote Sensing Approach
Abstract: This study centred on assessing potable water accessibility in sub-urban areas using Fiditi as a case study. This study adopted a service area network and overlay operation in ArcGIS to achieve the aim of this study. Locational coordinates of all the facilities were obtained through Garmin 76 handheld GPS. Also, ground truthing was adopted to distinguish residential buildings from non - residential buildings. Coordinates (X.Y, Z) of the study were …
Published in Journal of Water Resource Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 1–14 Read article
-
Seismic Behaviour of Curved Cable-Stayed Bridge
Abstract: Cable-bridges constructed in a more unique style for aesthetic and structural reasons. Curved cable bridges are not a common type of Highway Bridge in India, which are usually built at interchange which allows transportation of traffic from one highway to another. The current study presents the effect of horizontal curvature on the cable-stayed bridges. For this study, six finite element models of the cable-stayed bridge are developed with a different …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 2, 2019 · pp. 14–22 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Comparative study on defluoridation by adsorption using rice husk ash, tamarind seed powder and activated
Abstract: In the present study, the ability and suitability of low cost adsorbents such as rice husk ash (RHA), tamarind seed powder (TSP) to adsorb fluoride ions was investigated in jar test apparatus and results were compared with that of commercially available activated charcoal powder (ACP). The major parameters such as pH, concentration of F- ions, stirring rate, contact time and different adsorbent dosages were studied and optimized. The maximum removal …
Published in Recent Trends in Civil Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 25–32 Read article
-
Feasibility Studies on Cement Mortar Replaced with Ceramic Tile Waste as Secondary Binder
Abstract: This paper presents the results of experimental works focused on replacement of ceramic waste materials with cement in the production of cement mortar. The aim of this research work is to find the optimum percentage replacement of cement by ceramic tile waste in percentage replacement (5 to 25, 50 and 100%) mortar mixes. The ceramic waste tiles are mechanically crushed down ultrafine ceramic waste (UCW) powder passing 600 μ and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 68–75 Read article
-
Effect of pH on Shear Strength Behavior of Granular Soil
Abstract: In this research, the performances of pH value on shear strength behavior of granular soil have been studied. The shear strength of soil is an important term in most of the foundation engineering problems such as the bearing capacity of shallow foundation, slope stability of dam/embankment and lateral earth pressure on retaining walls. A series of direct shear tests were conducted on two types of dry granular soils (taken from …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 8–11 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article
-
Strength Assessment of RCC Beams Subjected to Corrosion
Abstract: The damage assessment of civil structural members is one of the most important and recently emerging fields in engineering. Deterioration of a structure may occur due to a host of factors such as poor workmanship, improper maintenance, atmospheric effects, accidents, natural calamities. Certain causes like environmental effects, natural calamities cannot be controlled. Therefore, durability of concrete structures especially those exposed to aggressive environments is of great concern. Many deterioration causes …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 139–152 Read article
-
Analytical Determination of Strength of Demolished Recycled Coarse Aggregate
Abstract: Construction work has increased rapidly from the past two decades. With these construction activities going up, we find lacking of the construction materials, particularly aggregates. So, finding an alternate resource and their feasibility; study is the need of our project. Recycled or used aggregate proves to be a good alternative here. Therefore, the investigation was carried out using compressive strength test, confined to the objective we have tested and empirically …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 1–7 Read article
-
Optimization of Cement Replacement by Fly Ash in Compressive Strength of Portland Cement Concrete
Abstract: The production of cement has been known for its additive role in environmental pollution. As a measure of abatement of pollution effort, scientist have evoked the concept of diluting cement with various pozzolanic additive like fly ash, blast furnace slag etc. Many of these additives were found to be acceptable for cement replacement, but their exact role and efficacy remains elusive. In the present study, fly ash was added as …
Published in Recent Trends in Civil Engineering & Technology · Vol. 7, Issue 1, 2017 · pp. 24–35 Read article
-
A Study on Strength and Durability of Fly Ash–Metakaolin Blended Geopolymer Concrete
Abstract: Production of cement causes 8% of the total carbon dioxide emissions in the world. Finding a right alternative to cement is the need of the hour, to eliminate environmental pollution caused by cement production. A substitute for conventional concrete can be industrial waste products like GGBS, Flyash, Metakaolin, and so on, these mineral admixtures can be used to fully replace cement with some activators this mix of mineral admixtures and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 3, 2022 · pp. 51–59 Read article
-
Exploring the Influence of Rice Husk Ash on Compressive Strength: Experimental Investigations in Construction Materials
Abstract: This paper aims to know the effect of rice husk ash on compressive strength 6 molds were collected and laboratory tests were conducted in cooperation with private laboratories in Baghdad Governorate, Iraq. The tests were conducted for a period of 7 and 28 days, where the samples were divided into 1 control and 5 samples distributed on a different percentage from 5% to 25% of the rice husks. The compressive …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 1, 2023 · pp. 24–28 Read article
-
Enhancing Concrete Strength: Investigating the Impact of Glass Fines on Mechanical Properties
Abstract: The global emission of CO2 from cement industries poses a significant environmental challenge, being a primary contributor to environmental issues. Numerous researchers have explored alternative cementitious materials to formulate robust and long-lasting concrete. This study focuses on utilizing waste glass powder (GlP), derived from rejected soda-lime glass bottles collected from various sources, for experimental purposes. The laboratory experiments investigate the behavior of concrete incorporating glass as a partial substitute for …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 3, 2023 · pp. 15–23 Read article