Search
1972 articles for “Respectful” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Study of the Effect of Cycle Time of Plasma Nitriding on the Service Life of AISI H-13 Tool Steel Die
Abstract: AISI H-13 tool steel is widely used as a hot-forging die for various automotive components. Usually, to increase the die life, the dies are subjected to additional surface treatment process such as carburizing, gas nitriding, salt bath nitriding, plasma nitriding, etc. The case depth is an important parameter in surface treatment process. In this work, AISI H-13 tool steel hot-forging dies are subjected to plasma nitriding. The nitriding time cycles …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 169–177 Read article
-
Study on Hot Working Characteristics and Deformation Response of as Cast AZ91 Mg Alloys
Abstract: The deformation response of magnesium alloy AZ91 was investigated by means of hot compression tests. The flow curves were obtained in the temperature and strain rate range of 300–500°C and 0.001–1 s-1, respectively. The processing maps of the studied material were obtained by interpreting them on the basis of the dynamic material model. The activation energy maps were developed based on Lyapounov’s function and the safe processing zones were confirmed …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 112–122 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Free Vibration Analysis of Moderate Thickness in Orthotropic Laminated Composite Plate Using FE Method
Abstract: This study presents the free vibration analysis of a composite laminated plate with respect to various parameters. Effect of orientation on a plate, effect of boundary conditions, effect of thickness to width ratio, effect of changing the number of ply on a plate and the effect of young’s modulus ratio are presented in this study. Classical boundary conditions are used to perform all the studies. Free vibration analysis of plate …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 1–8 Read article
-
Experimental Investigation on Machining of AISI 1045 Stainless Steel by using Cryogenic Cooling of Micro EDM Drilling Process
Abstract: In this experimental work, the cryogenic cooling of the Micro-EDM (µEDM) drilling process for improving the performance and quality of micro holes. The controllable parameters such as the current (Ip), pulse on time (Ton), Pulse off time (Toff) and gap voltage (Vg) were chosen for further investigation. The Taguchi L27 orthogonal array is preferred to achieve the best experimental runs. Case hardened AISI 1045 stainless steel is selected to perform …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 2, 2020 · pp. 21–37 Read article
-
Review and Effect of Acid Treatment on Indian Montmorillonite and Kaolin Clay
Abstract: Clay being the available resource throughout the world and being rich in alumino-silicate compounds is of great importance. This review mainly focuses on the montmorillonite and kaolin clay and includes acid treatment, clay based catalyst and zeolite from montmorillonite and kaolin clay. In this review, effect of acid treatment, Si/Al ratio and conversion of catalyst in reaction is discussed. Indian clay is treated with sulphuric acid and hydrochloric acid, respectively …
Published in Journal of Materials & Metallurgical Engineering · Vol. 10, Issue 3, 2020 · pp. 8–19 Read article
-
Transport Model of Nickel Deposition Influenced by Heterogeneous Velocity and Permeability on Saturated Soils
Abstract: Transport model of nickel was developed to monitor the variation rate of infiltration in two different formations of the soil. Its study in the formations and depositions observed to be outside the deltaic zone. These are based on other investigation carried out that verifies the types of deposited formation in the environment. Such generated information from further findings developed lots of other significant information on this deposition. The research expresses …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 34–58 Read article
-
Surface Modified Abaca Fibers: Physico-Mechanical, Morphological and Degradation Properties Evaluation
Abstract: Lignocellulosic fibers are used as cost-cutting fillers in plastics factories. Amid several factors, the ultimate performance of composite ingredients depends on the bond between the matrix resin and the filler, and hence on the quality of the interface. To acquire optimal performance of the end product, adequate interaction between the matrix and the lignocellulosic ingredient is preferred. This is often acquired through surface modification of the matrix or filler. Abaca …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 2, 2022 · pp. 34–46 Read article
-
Study on High Strength Ti-Al-V Alloy at Cryogenic Temperature
Abstract: The α+β type high strength titanium alloy is usually used as a structural biomaterial for the manufacturing of orthopaedic prostheses as well as surgical and dental implants. The Ti-Al-V alloy had been deliberately solution treated at 860°C for 1 h (subsequently quenched in variable mediums) just below the β transus but within the α+β region to avoid grain coarsening for single β region as well as accomplish optimum balance properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 1, 2023 · pp. 1–14 Read article
-
Conceptual Investigation of Temperature Effect on Total Dissolved Solid and Electrical Conductivity on Treatment of Polluted Water Using Adsorbent
Abstract: The conceptual investigation of temperature effect on total dissolved solid and electrical conductivity of petroleum hydrocarbon contaminated water medium was monitored using adsorbent packed in packed bed column. The experiment was set up for treatment of the contaminated water medium with crude oil and the initial concentration of the total dissolved solid and electrical conductivity was determined as well as after treatment. The result obtained showcases high mitigation in the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 45–50 Read article
-
Effect study of Cu2O in Perovskite (CH3NH3PbX3, X: I, Br, Cl) Solar Cell as Hole Transport Layer
Abstract: AbstractThe detailed modeling and mathematical simulation on perovskite solar cells have been performed with three various perovskite materials, such as “methyl ammonium lead trial halide (MAPbX3, MA= CH3NH3, X: I, Br, Cl)” with aid of solar cell capacitance simulator software (SCAPS) tools. The electrical possessions of MAPbX3 material performed as “active layer” and measured different parameters such as “open-circuit voltage (Voc), fill factor (FF), power conversion efficiency (PCE), and short-circuit …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 1, 2020 · pp. 5–10 Read article
-
An Overview of Energy Systems in Humanoid Robots
Abstract: The area of humanoid robots is an emerging topic in the world of robotic research owing to their usefulness in replacing humans in various tasks. The research and development of humanoid robots started almost 50 years ago and since then, there has been a huge progress in the related technologies. As the humanoid systems become capable of performing more and more complex tasks, the power requirement of humanoid robots increases. …
Published in Journal of Microelectronics and Solid State Devices · Vol. 7, Issue 3, 2020 · pp. 12–19 Read article
-
Improvements in Analog Performance of Dual Metal Gate based Silicon-on-Insulator Junctionless Transistor with Pocket Doped Window
Abstract: This paper elucidates the impact of pocket doped window on the analog performance of dual metal gate based silicon-on-insulator junctionless transistor (DMG SOIJLT). The analog parameters of proposed SOIJLT is compared with DMG based conventional SOIJLT. The findings of analog performance comparison reveal that transconductance (gm), transconductance generation factor (TGF), output conductance (gd), output resistance (r0), intrinsic gain (AV), and cut-off frequency (fT) have improved for DMG PD-SOIJLT as compared …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 1, 2021 · pp. 1–8 Read article
-
EXAMINING THE RAILROAD`S ELECTRIC TRACTION SYSTEM
Abstract: In this paper, the supply system for railway electrification is reviewed in its current status. In this essay, the direct current supply system and the alternating current supply system, respectively, are discussed. The supply collecting method, advantages, and energy effectiveness of the train electrification system are all outlined. The most widely used form of transportation in India is the railway. The fact that the majority of the railroad line is …
Published in Journal of Microelectronics and Solid State Devices · Vol. 9, Issue 3, 2022 · pp. 21–27 Read article
-
Effect Analysis of Different ETL Layer Thickness in Perovskite (CH3NH3PbI3) Solar Cell Using CuSCN as Hole Transport Layer
Abstract: Thickness of Electron Transport Layer (ETL) shows an important role in terms of stability and efficiency of perovskite solar cells. In this paper, numerical simulation and detailed modeling on perovskite solar cell was carried out using perovskite material such as methyl ammonium lead iodide (MAPbI3, MA= CH3NH3) at various thickness’s of ETL layer using the SCAPS tool. The electrical properties of the “MAPbI3 material” used as active layer for different …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 1–7 Read article
-
Performance analysis of ETL/Absorber and Absorber/HTL Interface Layer on Perovskite (CH3NH3PbX3, X: I) Solar Cell
Abstract: The effectiveness of perovskite solar cells employing perovskite materials such as methyl ammonium lead tri halide (MAPbX3, MA=CH3NH3, X:I) has been investigated in this research with the use of the SCAPS tool. The electrical properties of the MAPbX3 material utilized for the active layer have been calculated through numerical simulation and modelling for various parameters, including open-circuit voltage (Voc), power conversion efficiency (PCE), fill factor (FF), and short-circuit current density …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 1, 2023 · pp. 8–14 Read article
-
Ab Initio Investigation on Half-Heusler Compounds CoVZ (Z = P, Bi, Sb, As): Understanding Structural, Electronic, Magnetic, and Elastic Behavior
Abstract: The structural, electrical, mechanical, and magnetic properties of Half-Heusler CoVZ (Z= P, Bi, Sb, and As) compounds have been studied using the ab initio method. Here, we use the full potential linearized augmented plane wave (FP-LAPW) method, which is implemented by WIEN2k. The compounds CoVZ (Z= P, Bi, Sb, and As) are near to the Fermi level as implemented in the WIEN2k algorithm, exhibiting 100% spin polarization with finite band …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 3, 2023 Read article
-
Assessment of Natural Radiation Exposure from Sand and Sediment Samples Obtained from Kuakata Beach Area in Bangladesh
Abstract: In Bangladesh, Kuakata Beach situated in Patuakhali district contains some in sand and sediment. In this paper the activity concentration and absorb dose of sand and sediment collected sand and sediment collected from Kuakuta Beach were measured. The activity concentrations of radionuclides and their respective annual effective dose rates, produced by 226Ra, 232Th, 40 K were measured using a High Purity Germanium (HPGe) detector of relative efficiency 40%. The measured …
Published in Journal of Nuclear Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 18–26 Read article
-
Criticality Risk Assessment during Transportation and Storage of MTR Spent Fuel Elements
Abstract: Abstract This study aims to evaluate the criticality condition during transporting the spent fuel elements from the temporary storage to the permanent storage by using a Latin American cask. The cask was developed to transport the material testing reactor (MTR) fuel element type. MCNP5 code was used to calculate the criticality, expressed in terms of the neutron multiplication factor (k-effective), for normal and accidental situations using 21 fresh fuel elements. …
Published in Journal of Nuclear Engineering & Technology · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Multi-objective Reactive Power Planning based on MNSGA II
Abstract: Abstract This paper presents an application of modified NSGA-II (MNSGA-II) to reactive power planning (RPP) problem by minimizing the total cost (which consist of sum of annual energy cost and the installation cost of additional reactive power sources) and the load bus voltage deviations. Voltage stability index is considered as an additional constraint in order to include the system stability into account. Reference Pareto-front is generated using covariance matrix adopted. …
Published in Journal of Nuclear Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 37–45 Read article