Search
1348 articles for “Metallic”
-
Establishing Empirical Relationships to Predict Grain Size and Hardness of Pulsed Current Microplasma Arc Welded Inconel 625 Sheets
Abstract: Nickel alloys have gathered wide acceptance in the fabrication of components, which require high temperature resistance and corrosion resistance, such as metallic bellows used in expansion joints in aircraft, aerospace and petroleum industry. In case of single pass welding of thinner sections of this alloy, pulsed current microplasma arc welding was found beneficial due to its advantages over the conventional continuous current process. The paper focuses on developing mathematical models …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 37–47 Read article
-
Parametric Optimization of Tool Wear Rate in Side Flushing form of Die Sink EDM of EN-31 Die Steel
Abstract: Electrical discharge machining (EDM) is one of the most extensively used non-conventional material removal processes for manufacturing geometrically complex or hard material parts that are extremely difficult to machine by conventional machining process. EDM researchers have concentrated on achieving faster and more efficient metal removal rate coupled with a reduction in tool wear and improved surface characteristics. In this paper, the operating performance measures of side flushing type of electrical …
Published in Journal of Materials & Metallurgical Engineering · Vol. 1, Issue 1-3, 2011 · pp. 72–80 Read article
-
Effect of Carbon ,Chromium, Vanadium, Molybdenum, Manganese and Nickel on hardness and wear Resistance of Fe-Cr-C Hardfacing Alloys.
Abstract: The effects of combination of carbon (C), chromium (Cr), vanadium (V), molybdenum (Mo), manganese (Mn) and nickel (Ni) in Fe-Cr-C hardfacing alloy has been investigated on microstructure and microhardness with submerged arc welding (SAW) process. The Optical Microscope (OM) and Vicker micro-hardness tester were used. Powder form of ferro-chrome (Fe-Cr), ferro-vanadium (Fe-V), ferro-molybdenum (Fe-Mo), carbon (C), nickel (Ni) and ferro-manganese (Fe-Mn) were used as alloying elements to form coating layer …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 2, 2019 · pp. 20–28 Read article
-
Electrochemical Recovery of MnO2 from Spent Alkaline Batteries
Abstract: In the alkaline batteries of Zn/MnO2, the electrolytic manganese dioxide (EMD) is used as cathode that constitutes a very important part of household waste which contributes with heavy metals to the solid urban waste. This paper described the recovery of EMD by electro-oxidation on carbon cloth in acidic leached liquors from spent alkaline batteries. The maximum extraction for Mn and Zn were 43.68% (0.744 molL-1) and 56.11% (0.7321 molL-1) respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 9, Issue 3, 2019 · pp. 9–16 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery During Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 1–14 Read article
-
Analysis of DIBL Effect in MOSFET Working
Abstract: AbstractOne of the most widely used electronic devices, particularly in digital integrated circuits, is the metal insulator semiconductor (MIS) transistor. Most of the existing transistors used in fabrication of integrated chips are with junctions. The device scaling is growing the channel length between junctions in devices are scaling gone down to 10 nm. Drain Induced Barrier Lowering (DIBL) effect is prominent as the feature size of MOS device keep diminishing. …
Published in Journal of Microelectronics and Solid State Devices · Vol. 5, Issue 3, 2018 · pp. 33–40 Read article
-
Organic Light Emitting Diodes (OLEDs)
Abstract: This paper gives the brief analysis of Organic Light Emitting Diodes (OLED) .OLED is a special type of solid-state lighting source. An OLED device is typically formed in a sheet with emissive organic layer(s) located between a cathode and anode and deposited on a substrate. The substrate can be rigid such as glass or metal or flexible made of a polymer plastic. The number of emissive layers depends on the …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 1, 2021 · pp. 23–30 Read article
-
Solid State Technology Reinvents Microwave Heating
Abstract: Since magnetrons first came into widespread commercial use in microwave ovens in the early 1970s solid state technology has evolved relatively slowly to be used in industrial heating, consumer cooking, drying, automotive applications etc. Recently, RF energy utilizing solid state devices has appeared in the market as a viable replacement for magnetrons as the heating engine. This route offers many advantages like better energy direction control, longer life, enhanced reliability, …
Published in Journal of Microelectronics and Solid State Devices · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Thermally Responsive Electroluminescence in ZnS: Mn Phosphors: Experimental Insights
Abstract: ZnS: Mn phosphors and thin film technologies have been used to create alternative current thin film light emitters. Establishing a precise model for these devices becomes challenging because they rely on frameworks that have a definitive effect on the final product, such as the size of the molecules used, the phosphor fabrication process, and the doping concentration, the purity of ZnS, the device structure, and so forth. The ZnS: Mn …
Published in Journal of Microelectronics and Solid State Devices · Vol. 10, Issue 2, 2023 · pp. 9–14 Read article
-
Using Nuclear Grade Resin for Ion exchange
Abstract: In EDF, especially in the nuclear business, ion exchange resins are regularly employed for water purification. High-quality nuclear grade resins must be used in primary and secondary circuits as well as effluent treatment to retain dissolved species, some of which may be radioactive. To decrease worker dose during maintenance and to reduce radioactive resin waste volumes, purification needs to become more and more effective. The right resin qualities must be …
Published in Journal of Nuclear Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 33–37 Read article
-
Characterisation of Plasma Sprayed CNT-Alumina Composite Coatings on Boiler Tube Steel
Abstract: In this research work, the 1.5, 2 and 4 wt.% CNTs-Al2O3 coatings were prepared and successfully deposited on T22 boiler tube steel using plasma spray process. Ni-Cr was also used as bond coat before applying CNTs-Al2O3 coatings. The coatings were subjected to metallography, XRD and SEM/EDAX analysis. The porosity of CNTs-Al2O3 mixed coatings on T22 boiler steel was found to be decreasing with increase in CNTs content. The CNTs were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 1–15 Read article
-
Depolymerization of Polypropylene: A Systematic Review
Abstract: AbstractPolypropylene have become an indispensable ingredient of human life and most widely used thermoplastic in commodity applications. Polymerization of propylene is carried out by using Ziegler-Natta or Metallocene catalysts, which results in high molecular weights and crystalline polypropylene which are not required for several applications. Reduction in molecular weight of polypropylene in conventional reactors is uneconomical and complicated. Therefore to overcome this problem researchers and technologists proposed a post reactor …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 1–16 Read article
-
PVC Pipe Designer Furniture
Abstract: AbstractPolyvinyl chloride (PVC) products are 100% recyclable physically, chemically and energetically. This can be used to make various products like steam houses, kid’s houses, shoes stands, laptop stands, kid’s scooters, bookshelves etc. There are many benefits of PVC such as, high impact resistance, good temperature capability, light weight etc. PVC’s versatility, cost effectiveness and an excellent record of use, makes it capable enough that it can replace traditional building materials …
Published in Journal of Polymer & Composites · Vol. 4, Issue 2, 2016 · pp. 29–33 Read article
-
Simulation and Experimental Studies on the Effect of Injection Moulding Parameters on Tensile Properties of ABS Thermoplastic Specimen
Abstract: AbstractThe injection moulding process is the most widely used method of manufacturing Engineering thermoplastics. Thermoplastic blends and composites are suitably replacing metals and ceramics in most circumstances. This trend is mainly due to the versatility and compatibility of the injection moulding process. However, the injection moulding conditions has a significant impact on the aesthetic and functional characteristics of the final product as the flow induces substantial variation in the properties …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 1–10 Read article
-
Microwave Curing of Glass-Epoxy Composites Using Silica Based Moulds
Abstract: AbstractFor polymer composite product manufacture, curing of the fibre reinforced polymers (FRP) is a critical step in achieving desired mechanical properties. The conventional cure processes involve thermal curing in hot air ovens and autoclaves where the cure process is time and energy intensive. In this context, microwave curing is one of the most promising processing methods since it results in substantially reducing cure cycle time, energy requirements and operational costs …
Published in Journal of Polymer & Composites · Vol. 3, Issue 2, 2015 · pp. 52–57 Read article
-
Evaluating Novel Inhibitor Pigment Blends using Electrochemical Scanning Techniques (EIS, SVET and SKP)
Abstract: AbstractOne of the main applications coming to the fore for scanning vibrating electrode technique (SVET) and scanning Kelvin probe (SKP) systems is ability to look at inhibitor combinations, which could be used to replace chromates in coil-coated galvanized steels. The results are very promising using the SVET system and results with the SKP system also show results to be comparable with the SVET system. Electrochemical impedance spectroscopy (EIS) is also …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 6–16 Read article
-
Fabrication and Characterization of Magnesium Matrix Nanocomposites Reinforced with Multiwall Carbon Nanotubes
Abstract: Multiwall Carbon Nanotubes (MWCNTs)-reinforced magnesium nanocomposites were fabricated through powder metallurgy route and then hot extruded as secondary process. CNTs were added by 0.5, 1 and 1.5 wt% with magnesium powders and ball milled to obtain a homogeneous mixture. The effect on mechanical properties of Mg nanocomposites due to the reinforcement of MWCNTs was investigated. The effect of mixing through high-energy ball milling, sintering temperature and extrusion process on the …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 17–21 Read article
-
Effect of Shock Waves on the Hardness of Graphene Reinforced Aluminium Composites
Abstract: The advantageous properties of Aluminium metal components have proved their suitability in the field of aerospace industry, naval, sports, and other structural applications. Its disadvantages like high wear rate, less hardness limits its application for some special applications. Graphene is an allotropic form of carbon which exhibits high tensile strength, better co-efficient of friction and an easily derivable material from the carbon which is abundantly available in nature. Reinforcement of …
Published in Journal of Polymer & Composites · Vol. 8, Issue 1, 2020 · pp. 32–38 Read article
-
Novel Porous Refractory Synthesized from Diatomaceous Earth and Rice Husk Ash
Abstract: Refractory materials are products used in thermal equipment to protect the fire and prevent heat loss to the outside environment. Thermal equipment such as driers, ceramic kilns, glass or metal furnaces and others always consume high heat in the combustion of the fuel. If the thermal equipments have high heat loss which cause wastes of fuel and increases production costs. Therefore, researchers are always looking for a solution to minimize …
Published in Journal of Polymer & Composites · Vol. 8, Issue 2, 2020 · pp. 128–137 Read article
-
Chemical and Electrocoagulation for Chromium (VI) Removal from Galvanic Effluents
Abstract: Industrial effluents usually contain 10 to 500 mg/l Cr(VI); that according to internationalenvironmental rules must be set at permissible levels before being discharged into the environment.The upper permitted levels of chromium are 0.5 mg/l for effluent discharge and 0.01 mg/l for drinkingwater respectively. Hexavalent chromium is a very toxic heavy metal moiety occurring in variousindustrial wastewaters, such as electroplating, anodizing, tanning and dyeing effluents. Industrialeffluents may contain hundreds of mg/l …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 49–55 Read article