Search
1464 articles for “loss”
-
Seismic Evaluation of RC Framed Buildings using Performance Based Design
Abstract: Seismic resiliency of new buildings has developed over the years due to enhancements in seismic codes and design practices. Though, existing buildings designed and built under past codes are vulnerable and require a performance-based screening and retrofit prioritizing. Performance based seismic design provides a framework for determining the level of safety and level of property protection in earthquake events with the consideration of uncertainties in the quantification of possible hazard …
Published in Journal of Structural Engineering and Management · Vol. 7, Issue 1, 2020 · pp. 33–41 Read article
-
Effect of Viscoelastic Dampers on Progressive Collapse Resistance of RC Building
Abstract: Natural as well as man-made hazards may cause the failure of the primary load bearing members of buildings. The spread of an initial local failure from element to element, eventually result into the collapse of an entire structure or a large part of it, which is known as Progressive Collapse. Progressive collapse initiates when one or more primary load bearing elements get fails causing failure of the entire structure. It …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 27–34 Read article
-
Comparative Study on Damper and Shear Wall in Earthquake Analysis for Multi-storey Structure
Abstract: The earthquake is the one of the most devastating natural hazards that causes serious Structural damage and also great loss of life. Structural irregularities or asymmetrical plan are commonly found in constructions and structure due to the architectural demand .this research work focused on symmetric and asymmetric multi-storey building under the action of earthquake with and without damper and shear wall. The load combination given in IS-1893-2002 (Part-1.). The performance …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 13–21 Read article
-
Influence of Corrosion on Flexural Strength of Concrete
Abstract: The large-scale infrastructure uses reinforcement concrete. It has been believed that protection to steel reinforcement by concrete is permanent. The influence of atmospheric corrosion of steel and its performance in concrete has been subject to controversy in the construction industry. Service life of reinforced concrete structure can be significantly reduced when the corrosion of reinforcing steel is initiated; the product of corrosion expands and occupies greater volume than original volume …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 1, 2017 · pp. 35–42 Read article
-
“FORCE-DISPLACEMENT TRADE OFF” OF RCC BUILDING LOCATED AT VARIOUS SEISMIC ZONES AND SITE CONDITION ADOPTING TIME-HISTORY ANALYSIS
Abstract: Earthquake-resistant or aseismic design are considered to protect buildings to some or greater extent from earthquakes. The force-displacement trade off of structures located in various seismic zones are different in nature depending on intensity of earthquake. No structure can be fully immune to damage from earthquake, the vulnerability can be reduced for safety and durability. The force-displacement behavior of a particular structure can be modified to withstand seismic occurrence preventing …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 14–32 Read article
-
Comparative studies of Oxidation and hot corrosion behaviors of uncoated and detonation gun sprayed Cr3C2-25NiCr coating on SA-213 boiler steel at 8000C
Abstract: Fe-based alloys suffer oxidation and hot corrosion when the surfaces were in contact with air (oxidation) as well as the salty atmosphere (Hot corrosion) at elevated temperatures. In these atmospheric conditions, non-protective oxide Fe2O3 was formed on the surface of alloys. Oxidation and hot corrosion have been recognized as a major problem in the applications of the diesel engine, boilers, gas turbines, and chemical power plant etc. Detonation-gun sprayed Cr3C2-25NiCr …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 1, 2019 · pp. 17–22 Read article
-
Development of Mathematical Model for Tool Wear Rate Using 3-Level Response Surface Methodology
Abstract: Tool wear is the progressive loss of material from the surface of tool in the form of very small metallic particles. From decade tool wear rate was used as major criteria to predict the tool life. However, tool wear rate only measures principle wear, i.e., flank wear and face wear. In order to assesses the real damage to the tool and consider other tool wear like chip, notching, primary and …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 1–10 Read article
-
Performance of Cr3C2-25(Ni-20Cr) and Ni-20Cr Coatings on T22 Boiler Tube Steel in Simulated Boiler Environment
Abstract: Corrosion of metals is a dangerous process, due to which there is loss of metal by the attack of corrosive agents. The high temperature corrosion causes fast material degradation which results in failure of components. Boiler tubes in the thermal power plants are subjected to corrosion due to high temperatures. Thermal spray coatings have been used to reduce the corrosion of boiler tubes. In this research paper an attempt has …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 3, Issue 2, 2016 · pp. 19–26 Read article
-
Corrosion Inhibition Effect of 1-(4-Methoxy-phenyl)-3-(5-phenyl-1,3,4-oxadiazol-2-yl) propan-1-one Inhibitor for Mild Steel in 1 M HCl Solution
Abstract: The environmental friendly 1-(4-Methoxy-phenyl)-3-(5-phenyl-1,3,4-oxadiazol-2-yl) propan-1-one (A1) inhibitor is synthesized and their corrosion inhibition for Mild Steel in a 1 M HCl solution was studied using weight loss methods, electrochemical measurements, and the surface morphology of mild steel with and without inhibitor were studied using scanning electron microscopy (SEM) analysis. As the concentration of the inhibitor was increased the inhibition efficacy of 1-(4-Methoxy-phenyl)-3-(5-phenyl-1, 3, 4-oxadiazol-2-yl) propan-1-one was also enhanced and on …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 2, 2021 · pp. 31–37 Read article
-
Examination of the Physicochemical Properties of Lube Oil on the Effect of Load Utilization in a Generator Set
Abstract: Evaluation of the performance of lube oil in the generator on the effect of load utilization was studied to examine the effect on the quality. The continuous running of the generator set, and the load utilization reduces the quality of the lube oil which influences the operational performance. The quality of the lube oil used in servicing generator set experienced degradation with increase in operational hours as well as loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 1–9 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
Effect of Sol-Gel Coating on Fire Performance and Optical Properties of Wood Panels
Abstract: Investigates the impact of sol-gel coating on the fire performance and optical properties of wood panels.SEM, EDX, and infrared spectroscopy with the Fourier transform were used to characterize the sol-gel coating, which was put on to the wood panels using a dip-coating technique. The fire performance of the coated and uncoated wood panels was evaluated by measuring the ignition time, flame spread rate, and total heat release rate. The optical …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 20–24 Read article
-
Wearable Antenna using Foam Substrate for Multiband Application
Abstract: The novel and flexible antenna for modern communication system is studied in this paper. The proposed antenna is compact in size, shows high directivity and large bandwidth. Polystyrene foam material is used as a substrate because such antenna is bendable, wearable, inexpensive, require less attention and having good features like low dielectric constant, low loss tangent and better efficiency. The parameters of antenna such as reflection coefficient, gain, bandwidth, radiation …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 23–26 Read article
-
Performance Evaluation of Multiple Data Rates Flying Ad Hoc Networks Using Rayleigh Fading
Abstract: AbstractAn exertion has been made to delineate the execution of the Rayleigh fading channel models by utilizing QualNet test system as far as QoS parameters are concerned. A situation has been created here for the Rayleigh fading channels with different parameters. The parameters such as data rate and speed of nodes play very important role in the performance analysis and design of the flying ad hoc network over the multipath …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 2, 2018 · pp. 8–14 Read article
-
Designing of Circular Patch Antenna Modified by Metamaterial Structure
Abstract: AbstractThis finding is an outcome of the research carried out on the patch with the introduction of metamaterial. A “Dual Split Hexagonal Ring” metamaterial structure is implemented in the ground plane to modify the parameters of patch antenna i.e., circular. This recommended antenna operates on 2.42 GHz. Circular patch alone was not efficient and cannot be applicable for any applications, therefore a dual ring split metamaterial structure was implemented to …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 1–5 Read article
-
Designing of Ultra Wide Band Microstrip Antenna using Triple Slotted Patch and DGS
Abstract: AbstractIn this paper, an antenna is designing for Ultra Wide band that is 32.86 GHz is achieved which is very large bandwidth covering maximum application of wireless network. Initially a normal rectangular microstrip patch antenna with microstrip transmission line feed is designed. By using parallel slots in MSL feeding technique very wide bandwidth is achieved than simple design without parallel slots. Maximum impedance matching and good VSWR is achieved in …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 12–19 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
Dual Powered Two-wheeler for Vendors
Abstract: Today the major problem faced by the Indians is the day by day fuel cost increment. We are introducing a new method to reduce fossil fuel usage without compromising on the efficiency of our two-wheeler with reduction in the overall fuel cost. We can increase the efficiency and reduce pollution by the usage of this dual powered vehicle. The objective of this paper is to construct an efficient petrol bike …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 2, 2019 · pp. 39–48 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
Integrated Missed Call Alert Server Implementation
Abstract: For an organization with its own private branch exchange, the users may be sometimes out of the coverage area or the mobile device may be switched off. No user must miss information while he is away from the network. Hence the paper aims at installation and configuration of Missed call alert Server (MCA), which helps in improving call efficiency. The notification of the missed calls including the details in the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 8, Issue 2, 2021 · pp. 12–26 Read article