Search
211 articles for “SEM (Scanning Electron Microscopy)”
-
Utilization of Banana Peel Biopolymer as a Natural Coagulant for Wastewater Treatment: A Sustainable Approach to Bio-Composite Applications
Abstract: This study explores an eco-innovative approach to wastewater treatment by utilizing banana peel powder (BPP) as a sustainable, low-cost bio-coagulant. Although effective, conventional chemical coagulants like aluminum sulfate and synthetic polymers are often non-biodegradable, toxic, and economically burdensome, particularly in decentralized or low-resource settings. In contrast, BPP—an agro-waste material rich in bioactive functional groups such as hydroxyl, carboxyl, and phenolic compounds—provides a renewable and environmentally friendly alternative. To enhance its …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 106–115 Read article
-
Development of Self-Healing Circuit Boards Using Shape Memory Polymer Composites
Abstract: This study investigates the influence of temperature, humidity, and nanofiller type on the electrical and structural performance of advanced polymer nanocomposites for self-healing circuit applications. Particular attention was given to conductivity retention and the morphological behavior of carbon nanotubes (CNTs), graphene, and silver nanoparticles (AgNPs). Results show that conductivity decreased under elevated thermal–humidity conditions, reflecting the role of environmental stress in material degradation. Among the tested systems, AgNP-based composites achieved …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 746–770 Read article
-
An Experimental Study on Multi-Criteria Parameters Optimization of Process for Al6351/SiC/Gr Metal Matrix Composites Using AHP-TOPSIS Approach
Abstract: This research focuses on optimizing the process parameters of Wire Electrical Discharge Machining (WEDM) for a hybrid Metal Matrix Composite (MMC) comprising Al6351 aluminum alloy reinforced with 4% SiC and 6% graphite (Gr), fabricated via squeeze casting. This technique enables the formation of dense, defect-free composites with uniform reinforcement distribution, enhancing both mechanical properties and structural integrity. Microstructural characterization using Scanning Electron Microscopy (SEM) confirmed the even dispersion and bonding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 303–319 Read article
-
Next-Generation Conductive Polymer Composites for Flexible and Wearable Electronics
Abstract: The rising demand for flexible and wearable electronics has accelerated research into conductive polymer composites (CPCs) due to their lightweight nature, electrical conductivity, and mechanical flexibility. Despite significant advancements, challenges such as reduced conductivity under mechanical deformation and limited durability persist. This study aims to develop next-generation CPCs with enhanced conductivity, flexibility, and self-healing capabilities. Hybrid nanofillers—graphene, carbon nanotubes (CNTs), and silver nanowires (AgNWs)—were incorporated into bio-based conductive polymers through …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 550–566 Read article
-
A Sol-Gel Approach for the Fabrication of Zinc Oxide Nanoparticles and Their Nanocomposite with Urea Formaldehyde (UF)
Abstract: In the performed work, zinc oxide nanoparticles were synthesized via the sol-gel method using zinc sulphate as the precursor material. Urea-formaldehyde (UF) resin was employed as a polymer matrix to encapsulate the produced ZnO through an acid-catalyzed polymerization process. This encapsulation aimed to improve the dispersion stability and surface reactivity of ZnO within the polymeric medium. The synthesized materials were subjected to comprehensive characterization using Fourier Transform Infrared Spectroscopy (FT-IR), …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 2, 2025 · pp. 21–27 Read article
-
Role of Strontium in Structural and Dielectric characterstics of Barium Titanate
Abstract: Ba₀.₇₅Sr₀.₂₅TiO₃ (BST) compound was synthesized through the conventional solid-state reaction methodology, aimed at investigating its structural, microstructural, and dielectric characteristics. The structural characterization was executed employing X-ray diffraction (XRD), and the resultant diffraction patterns were refined utilizing the Rietveld method, which substantiated the establishment of a single-phase perovskite configuration exhibiting tetragonal symmetry and belonging to the P4mm space group. The refined lattice parameters revealed subtle distortions correlating with the substitution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1157–1163 Read article
-
Revolutionizing Petrology and Mineralogy: The Study of AI and Advanced Sensor Technologies
Abstract: Petrology and mineralogy are fundamental to understanding Earth's intricate processes, from crustal evolution to economic resource formation. However, traditional methods, while precise, are often laborious, time-consuming, and occasionally subject to interpretive bias. This abstract explores the transformative potential of integrating cutting-edge Artificial Intelligence (AI) and advanced sensor technologies to revolutionize data acquisition, analysis, and interpretation in these critical geosciences. Advanced sensor technologies, including high-resolution spectral imaging (hyperspectral, Raman), automated X-ray …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 1–11 Read article
-
Optimization of Direct Ink Writing Process Parameters for Liquid Silicone Rubber/TiO2 Composite Ink
Abstract: The purpose of this research is to develop and optimize the Liquid Silicone Rubber (LSR)/Titanium Dioxide (TiO₂) composite inks in Direct Ink Writing (DIW)-based 3D printing systems. The primary research objective was to use enhancement of mechanical, rheological, and dielectric characteristics of LSR using TiO₂ reinforcement but still retain extrusion stability and dimensional consistency. TiO₂ content (0, 5, 10, and 15 wt%) and catalyst and glycerol ratios were regulated and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 240–259 Read article
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Composite Behavior of Bagasse Ash Stabilized Expansive Soil with Sodium Benzophenone Under Curing Conditions
Abstract: The present investigation examines the development of a hybrid composite using Black Cotton (BC) soil, Bagasse Ash (BA), and Sodium Benzophenone (SBP) as performance-enhancing elements. Different ratios of BA, a silica-rich agro-industrial by-product, were added to improve pozzolanic reactivity and particle size distribution (0%, 6%, and 12%). SBP was added in the range of 0–0.6% as a compatibilizer in order to enhance interfacial adhesion, particle cohesivity and moisture-assisted deterioration resistance. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1134–1146 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
Evaluating Fiber Volume Fraction and Defects in Fiber Reinforced Polymer Composites for T Joint applications
Abstract: Fiber-reinforced polymer (FRP) composites have been integral to industries such as aviation, aerospace, shipbuilding, and automotive due to their strength, durability, lightweight, and corrosion resistance. This study examines the production and microstructural analysis of polymer composites using FRP and manual lamination methods. While manual lamination is quick and economical, it relies on operator skill, resulting in low mechanical properties. Microstructure analysis via 3D optical and scanning electron microscopes revealed that …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1222–1235 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Mechanical and Thermal Performance of PETG Composites Reinforced with Short Carbon Fibers via Fused Filament Fabrication
Abstract: The study investigates the fabrication and characterization of polyethylene terephthalate glycol (PETG) composites reinforced with short carbon fibers (CF) using the fused filament fabrication (FFF) technique. Composite filaments with varying CF weight fractions (0, 5, 10, 15, and 20 wt%) were produced and evaluated for their mechanical, thermal, and morphological performance. The influence of CF reinforcement on tensile, flexural, and impact behavior was systematically examined, alongside thermal stability metrics including …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1219–1238 Read article
-
Investigating The Influence of Sic Reinforcement on The Mechanical and Tribological Properties of PA12 Polymer Composites in SLS
Abstract: The study investigates the mechanical and tribological performance of neat PA12 polymer and SiC-reinforced PA12 polymer composites made via Selective Laser Sintering (SLS). To evaluate just how reinforcement has influence upon overall performance, we incorporated into the PA12 polymer matrix a constant amount of 5 wt.% of Silicon Carbide (SiC). Mechanical testing focused on both tensile and fatigue behavior and testers conducted it with a Servo-Hydraulic Multipurpose High-Capacity Fatigue Test …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 541–554 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Performance Enhancement of COC-Modified LLDPE Films: Optimization of Stiffness, Tear Resistance, and Barrier through Plasma Surface Modification
Abstract: This study explores the development of high-performance packaging materials by blending commodity Linear Low-Density Polyethylene (LLDPE) with engineering cyclic olefin copolymer (COC) as a performance modifier. To leverage the processability of LLDPE alongside the structural rigidity of COC, blends were prepared at various weight ratios (95/05, 90/10, 85/15, and 80/20) using twin-screw melt extrusion, followed by the production of films and sheets via blown film extrusion and compression molding. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 128–143 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article