Search
1108 articles for “loss”
-
Examination of the Physicochemical Properties of Lube Oil on the Effect of Load Utilization in a Generator Set
Abstract: Evaluation of the performance of lube oil in the generator on the effect of load utilization was studied to examine the effect on the quality. The continuous running of the generator set, and the load utilization reduces the quality of the lube oil which influences the operational performance. The quality of the lube oil used in servicing generator set experienced degradation with increase in operational hours as well as loss …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 1–9 Read article
-
Fabrication and Surface Modified Non-woven Calotropis gigantea Fiber Mat Reinforced Polypropylene Composites by Film Stacking Method
Abstract: Nowadays, there is a growing environmental consciousness and awareness about the need for sustainable development, which has led to growing interest in using natural fibers as reinforcement in polymer composites for synthetic fiber substitution. The current work deals with the effects of Calotropis gigantea fiber (CGF) content and chemical modification of CGF mats by treatment with sodium dodecyl sulfate (SDS) and SDS-pretreated benzoyl chloride on the fundamental properties of CGF-filled …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 1, 2022 · pp. 10–22 Read article
-
Effect of Sol-Gel Coating on Fire Performance and Optical Properties of Wood Panels
Abstract: Investigates the impact of sol-gel coating on the fire performance and optical properties of wood panels.SEM, EDX, and infrared spectroscopy with the Fourier transform were used to characterize the sol-gel coating, which was put on to the wood panels using a dip-coating technique. The fire performance of the coated and uncoated wood panels was evaluated by measuring the ignition time, flame spread rate, and total heat release rate. The optical …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 20–24 Read article
-
Wearable Antenna using Foam Substrate for Multiband Application
Abstract: The novel and flexible antenna for modern communication system is studied in this paper. The proposed antenna is compact in size, shows high directivity and large bandwidth. Polystyrene foam material is used as a substrate because such antenna is bendable, wearable, inexpensive, require less attention and having good features like low dielectric constant, low loss tangent and better efficiency. The parameters of antenna such as reflection coefficient, gain, bandwidth, radiation …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 2, 2017 · pp. 23–26 Read article
-
Performance Evaluation of Multiple Data Rates Flying Ad Hoc Networks Using Rayleigh Fading
Abstract: AbstractAn exertion has been made to delineate the execution of the Rayleigh fading channel models by utilizing QualNet test system as far as QoS parameters are concerned. A situation has been created here for the Rayleigh fading channels with different parameters. The parameters such as data rate and speed of nodes play very important role in the performance analysis and design of the flying ad hoc network over the multipath …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 2, 2018 · pp. 8–14 Read article
-
Designing of Circular Patch Antenna Modified by Metamaterial Structure
Abstract: AbstractThis finding is an outcome of the research carried out on the patch with the introduction of metamaterial. A “Dual Split Hexagonal Ring” metamaterial structure is implemented in the ground plane to modify the parameters of patch antenna i.e., circular. This recommended antenna operates on 2.42 GHz. Circular patch alone was not efficient and cannot be applicable for any applications, therefore a dual ring split metamaterial structure was implemented to …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 1–5 Read article
-
Designing of Ultra Wide Band Microstrip Antenna using Triple Slotted Patch and DGS
Abstract: AbstractIn this paper, an antenna is designing for Ultra Wide band that is 32.86 GHz is achieved which is very large bandwidth covering maximum application of wireless network. Initially a normal rectangular microstrip patch antenna with microstrip transmission line feed is designed. By using parallel slots in MSL feeding technique very wide bandwidth is achieved than simple design without parallel slots. Maximum impedance matching and good VSWR is achieved in …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 3, 2018 · pp. 12–19 Read article
-
A Circular Slot Loaded H-Shaped Printed Microstrip Patch Antenna for Lower Band 5G Applications
Abstract: Abstract: A circular slot loaded H-Shape patch antenna is introduced in this paper. A circular slot loaded H-Shape patch antenna is fed with coplanar wave guide (CPW) is discussed which is applicable for lower band 5G applications. The radiation pattern is omni-directional which is very near to H-plane. The area of ground plane is 80×101×1.5 mm3 with substrate material having dielectric constant 2.2 and loss tangent 0.002 is used. The …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 1, 2019 · pp. 9–14 Read article
-
Dual Powered Two-wheeler for Vendors
Abstract: Today the major problem faced by the Indians is the day by day fuel cost increment. We are introducing a new method to reduce fossil fuel usage without compromising on the efficiency of our two-wheeler with reduction in the overall fuel cost. We can increase the efficiency and reduce pollution by the usage of this dual powered vehicle. The objective of this paper is to construct an efficient petrol bike …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 6, Issue 2, 2019 · pp. 39–48 Read article
-
Design of a Stacked Aperture Coupled Microstrip Antenna for UWB Applications
Abstract: The paper presents a stacked T-shaped Aperture coupled microstrip antenna designed for ultra-wide band wireless applications. The proposed UWB antenna covers two frequency bands as of 2.49 to 2.9 GHz and 6.85 to 20 GHz and used for the various applications like Bluetooth, Zig-Bee (2.4 GHz), C band (6 to 8 GHz), X band (8 to 12 GHz), Ku band (12 to 18 GHz) and Satellite communication. The stacked antenna …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 4, Issue 1, 2017 · pp. 12–16 Read article
-
Integrated Missed Call Alert Server Implementation
Abstract: For an organization with its own private branch exchange, the users may be sometimes out of the coverage area or the mobile device may be switched off. No user must miss information while he is away from the network. Hence the paper aims at installation and configuration of Missed call alert Server (MCA), which helps in improving call efficiency. The notification of the missed calls including the details in the …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 8, Issue 2, 2021 · pp. 12–26 Read article
-
Optimization of Transmission System by adopting 765/800KV Ultra High Voltage Network and its Technical Configurations
Abstract: In the era of persistent capacity shortages, ever increasing demand scenario, increased market operation and formation of National grid, new challenges have arisen in operation and control of large integrated and interconnected power system in India. The paper chronologies development of interconnected system in India from the state of independent utilities of 1950s to the well developed present interconnected National Grid. High voltage has been attractive proposition for large power …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 9, Issue 1, 2022 · pp. 31–42 Read article
-
Real Time FPGA-based Embedded Architecture of Audio Compression and Decompression Core for Multimedia System
Abstract: A multimedia system links images and audio to distribute and transmit information to users. These images and audio data have to be compressed for raising capacity of storing and processing tasks in real time without losing the required information. This paper introduces an audio processing unit by using the FPGA hardware board. This is a complete Embedded system where the audio compression and decompression core is firstly described as a …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 1, 2015 · pp. 34–44 Read article
-
Hardware Optimization of FPGA for I2C Master Protocol and Interfacing with EEPROM Slave
Abstract: This paper focuses on I2C (Inter Integrated Circuit) protocol master controller. I2C protocol was originally given by Philips semiconductors so that faster devices can communicate with slower devices and also allow devices to communicate with each other over serial bus without data loss. The I2C controller provides support for a communication link between integrated circuits and memory units on a board. I2C is a bidirectional serial bus which contains two …
Published in Journal of VLSI Design Tools and Technology · Vol. 5, Issue 2, 2015 · pp. 42–48 Read article
-
A New High Speed Low Power 1 Bit Full Adder
Abstract: This paper proposes a low power, low area and high speed 1-bit full adder compared to earlier 1bit full adder designs. The adder comprises of eight transistors with some modifications over the other existing design, so that it can invariably be used in the device with least nano device dimensions. The proposed design exhibits lower threshold loss and works faithfully in sub-threshold regime with appreciable voltage swing at lower power …
Published in Journal of VLSI Design Tools and Technology · Vol. 3, Issue 1, 2013 · pp. 8–13 Read article
-
A Survey on Recent Approaches for Leakage Power Reduction in MOS Integrated Circuits
Abstract: Today the integrated circuit’s functionalities are increasing day by day with increase in the number of transistors in it. However, the scaling of the transistors, top increase its number, for the same area of an IC reduces its sub-threshold voltage with its increase in the leakage power consumption. Scaling at different scales (45, 60, 90 nm, etc.) leads to major losses, both at static and dynamic phases of the circuits. …
Published in Journal of VLSI Design Tools and Technology · Vol. 4, Issue 2, 2014 · pp. 24–31 Read article
-
Comparative Analysis of Low-Power Adiabatic Techniques
Abstract: In today’s modern era, new revolutionary designs are replacing old traditional bulky designs. Due to advancements in technology, low-power designs are in demand. Advantages of adiabatic technique can be used for overcoming disadvantages of typical CMOS such as dissipated energy loss. Adiabatic techniques are extremely reliant on parameter changes. In this paper, the merits of adiabatic techniques are depicted on the basis of parameter variations. By the use of SPICE …
Published in Journal of VLSI Design Tools and Technology · Vol. 4, Issue 2, 2014 · pp. 53–58 Read article
-
Low Power RF QPSK MODEM Design
Abstract: System-level simulation including design of CMOS circuits for radio frequency QPSK MODEM targeting applications in 2.45 GHz industrial, scientific and medical (ISM) band has been presented in this paper. Based on the QPSK architecture, the MODEM consists of an analog mixer using a voltage multiplier, a 90 °phase shifter, delay circuits, a voltage adder and a filter to detect the information. A code reuse subsystem block consisting of Chebyshev filter …
Published in Journal of VLSI Design Tools and Technology · Vol. 2, Issue 1-2-3, 2012 · pp. 75–86 Read article
-
Design of FPGA Based ALU Using Reversible Logic Gates
Abstract: Reversible or information misfortune less circuits has applications in computerized signal handling, correspondence, PC design and nanotechnology. Reversible technique is utilized to minimize heat that happens in traditional circuits by keeping the loss of data. This paper proposes a reversible configuration of an ALU. This ALU comprises of eight operations, five are of arithmetic category and three are from logical category operations. An arithmetic operations incorporate add, sub, increase by …
Published in Journal of VLSI Design Tools and Technology · Vol. 6, Issue 3, 2016 · pp. 15–21 Read article
-
Wire Network Survivability for Upgraded Consistency in Smart Power Grids
Abstract: Power transmission system infrastructures transmit energy over a long distance and are essential to the operation of urban society. These configurations progressively reflect highly coupled cyber-physical structures where automated telecommunications networks are used to transmit status and control details to power transmission grid elements, i.e. smart grids. However, due to the high degree of interdependence between the contact and power grid layers, malfunction incidents may contribute to more loss of …
Published in Journal of VLSI Design Tools and Technology · Vol. 10, Issue 3, 2020 · pp. 16–21 Read article