Search
1984 articles for “surfaces” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Drinking Water Problems and Possible Alternatives in Coastal Region of Bangladesh: A Case Study
Abstract: Safe drinking water for the coastal areas of Bangladesh has become a big challenge. Arsenic adulteration and salinity intrusion in surface water body has accelerated the scarcity of water in the coastal region. As situation ameliorating and also investment for water-borne diseases is decreasing, it becomes the major threat for a third-world country like Bangladesh. There are lots of alternatives for water supply but there are also a huge number …
Published in Journal of Water Resource Engineering and Management · Vol. 1, Issue 3, 2014 · pp. 24–34 Read article
-
Storm water Management of Badlapur City
Abstract: Stormwater management is the science of managing the surface runoff to prevent adverse impact on the environment. The main aim of storm water management is to manage water quantity and in addition to protect water quality. The rainfall infiltrates into the soil, be held on the surface and evaporate, or runoff and ends up in nearby streams, rivers, or other water bodies. The storm water management becomes more challenging due …
Published in Journal of Water Resource Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 5–8 Read article
-
Analysis of Thermal Pattern Variation for River Ganges with Satellite Imagery
Abstract: Stream temperature is a fundamental aspect of water quality and ecosystem health of the river affecting its physical, chemical and biological processes; so the monitoring and understanding of the thermal regime of rivers is extremely important. Water temperature affects water quality such as dissolved oxygen, pH, salinity and it also has influence on growth and extent of aquatic organisms. Remote sensing applications can be an effective alternative to the conventional …
Published in Journal of Water Resource Engineering and Management · Vol. 7, Issue 3, 2020 · pp. 21–30 Read article
-
Scientific Investigation of the Ancient Water Bodies (Baravas) from Akkalkot Taluka, Solapur District, Maharashtra: Special Emphasis on Tirth and Jeur Region.
Abstract: Ancient water bodies (Baravas), are the step wells of modern culture. These traditional and important structures are neglected by many researchers for water planning aspect. So, this study explores the architecture of stepwells (Baravas), built traditionally in the western Maharashtra for storing and utilizing the groundwater. Step-wells are the constructions up to 3 to 5 store down from ground level comprising a water-body, which majorly are attractively planned. Above stated …
Published in Journal of Water Resource Engineering and Management · Vol. 9, Issue 3, 2022 · pp. 29–38 Read article
-
Turbulence Characteristics of Flow over Smooth and Rough Beds
Abstract: Experimental study on turbulence measurements in an open channel with smooth and rough beds using acoustic doppler velocimeter (ADV) has been carried out in the present study. Measured velocity distribution along the depth on smooth and rough beds for different discharges and bed slopes is in good agreement with logarithmic law. The turbulence intensities were more near the bed and less near the water surface. Existing equations for turbulence intensities …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 160–166 Read article
-
An Analytical Model for Sub grid Force-Equilibrium Approach in Submerged Vegetative Channel
Abstract: A new, analytical model of the vertical flow velocity profile of submerged vegetation has been developed. Velocity profile can be divided into three zones: linear zone which is closed to bed with linear velocitydistribution, logarithmic zone which involves the main channel without vegetative cover and the middle zone (transition zone) that is affected by the momentum of upper zone. For the surface layer, Prandtl’s mixing lengthconcept is adopted resulting in …
Published in Recent Trends in Civil Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 1–7 Read article
-
Slope Stability Analysis by Swedish Slip Circle Method Using C-Programming
Abstract: The side slopes of an earthen dam should be safe against shear failure. Out of the various methods of stabilityanalysis of slopes, “Swedish Slip Circle Method” is commonly used in practice. Here in the Swedish circlemethod, potential failure surface is assumed to be cylindrical in shape (i.e., circular in cross section). Afterdetermining the actuating and resisting forces for assumed failure surface, the factor of safety is calculated. Theslope is considered …
Published in Recent Trends in Civil Engineering & Technology · Vol. 1, Issue 1-3, 2011 · pp. 47–68 Read article
-
Design of Experiments of an Effective Thermal Conductivity of Composite Matrix by using Numerical Simulation
Abstract: Effective thermal conductivities of fillers and matrix reinforced composite models are analysed by using Finite Element (FE) simulation. The process parameters of different filler concentrations, filler piece arrangements and thermal conductivity ratio are analysed by Design of Experiment. In this study, simulation based on fully replicable five -factor, five-level central composite design. Regression models are developed to analyze the effects of process parameter. The responses are analyzing the direct and …
Published in Recent Trends in Fluid Mechanics · Vol. 6, Issue 2, 2019 · pp. 1–18 Read article
-
Short Review on Optofluidics as the Experimental Junction between Microfluidics and Optics
Abstract: AbstractAmong the present research-fields of fluid mechanics, optofluidics is one emerging topic towards the industrial applications. Appropriate experimental advancement of microfluidics is required to be integrated with optical components for the production of optofluidic devices and systems. In this particular review work, the theoretical and experimental research-work performed on surface-driven microfluidic flow is briefly mentioned. Also, the recent advancement of research on optofluidics is briefly mentioned. This review work may …
Published in Recent Trends in Fluid Mechanics · Vol. 7, Issue 2, 2020 · pp. 41–44 Read article
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Design and Thermal Analysis of Fins for Air Cooled Engine by Varying its Geometry
Abstract: An air-cooled motorcycle engine releases heat to the atmosphere through the mode of convection to facilitate this, fins are provided on the outer surface of the cylinder. The cooling fins allow the wind to move the heat away from the engine. The heat transfer rate depends upon the velocity of the vehicle, fin geometry and the ambient temperature. Low rate of heat transfer through fins is the main problem of …
Published in Trends in Machine design · Vol. 5, Issue 3, 2018 · pp. 37–53 Read article
-
Passive Capillary Flow of Red Dye in the SU-8 based Glass Microfluidic Devices
Abstract: In this work, total three individual SU-8 based glass microfluidic devices are fabricated by the maskless lithography and indirect bonding technique. Commercially available red coloured food dye is used as working liquid. Individual surface-driven capillary flows of red dye are recorded by the CMOS camera. This work will be useful in bioengineering applications.
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 59–61 Read article
-
Multi Objective Optimization in Micromilling of 304L steel by Taguchi-Grey-Fuzzy Method: Literature Review
Abstract: Micromechanical milling of 304L Stainless steel which is commonly used in the welded in severe corrosion environment and it terminates the need for annealing. The goal of this study is to investigate the influence of process input parameter such as cutting speed, depth of cut, feed per tooth, radial immersion percentage and plunging method on process output during circular pocketing operations. Tool wear, machining forces and surface roughness measurement are …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 2, 2020 · pp. 25–30 Read article
-
Suitability of Additive Manufacturing Process in Optical Lens Production
Abstract: Additive Manufacturing is one of the non-conventional methods of manufacturing that is gaining immense popularity for its ease to manufacture customized parts. The lenses have always been manufactured using a continuous process of Blanking, Surface generation, Edging and Centering, Grinding, Polishing, and Coating. But the conventional processes demand large inventories and more time. Customization of lenses may also be possible if a process like Additive Manufacturing is implemented. Also, the …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 3, 2021 · pp. 39–46 Read article
-
Improved Performance Characteristics of a Designed 1050 nm Bottom Emitting MQW VCSEL using Al0.25Ga0.22In0.53As/InP Materials
Abstract: AbstractIn this work, the design and performance characteristics of a bottom emitting Al0.25Ga0.22In0.53As/InP Multi-Quantum Well (MQW) Vertical-Cavity Surface-Emitting Lasers (VCSEL) have been presented for operation at a wavelength of 1050 nm. The transparency carrier density and bandgap energy of the QW and barrier materials are computed. An improved performance of the designed VCSEL has been obtained by selecting a material with high gain and lower transparency carrier density in the …
Published in Trends in Opto-electro & Optical Communication · Vol. 3, Issue 3, 2013 · pp. 22–30 Read article
-
Optimization of Performance Characteristics of Rail Wheel Profiling using Taguchi with ANOVA
Abstract: Optimization is the process or technique to approach the best output goal, which is necessary, that the production of the industries at the best quality in minimum total input cost and maximize the profit. So there are many optimization methods, one of them is Taguchi method. The outline of the paper, the optimization approach based on Taguchi method, which is to optimize the cutting parameter in under grounded CNC Turning …
Published in Trends in Transport Engineering and Applications · Vol. 2, Issue 1, 2015 · pp. 25–38 Read article
-
Finite Element Modeling of Asphalt Concrete Pavement Reinforced with Geogrid by Using 3-D PLAXIS Software
Abstract: This paper presents an axisymmetric finite element (FE) model to analyze the behavior of unreinforced and geogrid reinforced asphalt concrete pavement subjected to various tire pressures. The model was loaded with an incremental loading from 100 to 600 kPa with 50 kPa increment and the critical pavement responses such as total stress and vertical surface deflection were determined for unreinforced and geogrid reinforced flexible pavement. The results indicated that during …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 12–20 Read article
-
Assessing the Durability of Stone Matrix Asphalt Concrete
Abstract: Stone Mastic Asphalt (SMA) is widely used throughout the world as one of the preferred asphalt surfacings. The local specifications define asphalt concrete durability based on maximum loads at failure. Therefore, it is required to assess the durability of the road surface materials of SMA and their ability to resist operational effects in terms of environmental impact. In this investigation, the durability of stone matrix asphalt concrete was assessed in …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 1–8 Read article
-
Image Preprocessing Techniques
Abstract: ABSTRACTPreprocessing method is an important step, specifically for low-quality picture images. This method is robust to lighting variations and produces images with very little noise and consistent stroke width. The process computes a “surface” of background intensities at every point in the image that performs adaptive thresholding based on this result. The surface is estimated by identifying regions of low resolution text and interpolating neighboring background intensities into these regions. …
Published in Journal of Computer Technology & Applications · Vol. 3, Issue 2, 2012 · pp. 20–29 Read article
-
Real-world Pothole Detection Using Image Processing and Deep Learning Convolutional Neural Network Model
Abstract: Potholes are a major problem of concern in many parts of the cities across the country. Road accidents are one of the causes that significantly affect humanity and result in damage to vehicles and road surface. Potholes are dangerous for pedestrians who walk along the road and vehicular traffic on busy roads. Road accidents are caused due to improper maintenance of roads, and it is imperative to attend to such …
Published in Journal of Computer Technology & Applications · Vol. 14, Issue 3, 2023 · pp. 95–103 Read article