Search
834 articles for “Experimental testing”
-
Experimental Analysis of Filler Slab Using Self-Compacting Concrete
Abstract: Present-day self-compacting concrete is classified as an advanced construction material. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It can flow under its weight, completely filling formwork and achieving full compaction, even in the presence of congested reinforcement. The hardened concrete is dense, homogeneous and has the same engineering properties and durability as traditional vibrated concrete. An important improvement of health and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 3, 2016 · pp. 15–24 Read article
-
Experimental Investigation of OPC Concrete with Incorporation of Glass Powder as Partial Substituent Material.
Abstract: This study presents an experimental survey aimed at evaluating the viability of incorporating glass powder (GP) as a partial substitute for cement in concrete matrix. The research focuses on assessing the effect of this sustainable alternative in concrete by investigating the various properties of fresh concrete such as workability, mechanical and durability aspects. Specimens were prepared with GP replacement to cement at 5%, 10%, 15%, and 20% levels, with comparative …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1058–1068 Read article
-
Grey Relational Analysis of Cuttlefish Bone Particles–Glass Fiber Reinforced Epoxy Composites
Abstract: This research examines the mechanical characteristics, water absorption performance, and thermal stability of epoxy composites reinforced with Cuttlefish Bone Particles (CFBP) and glass fibers. Composites were fabricated with varying CFBP contents (0%, 3%, 6%, 9%, and 12%) using an epoxy resin as the matrix material and glass fiber as the primary reinforcement. The experimental results revealed that the CFBP-0 composite (neat epoxy with glass fiber) exhibited the highest tensile strength, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 239–246 Read article
-
Finite Element Analysis and Validation of Axial Capacity of RC Columns Made of Steel Fiber Reinforced Concrete (SFRC)
Abstract: Steel Fiber Reinforced Concrete (SFRC) possesses many excellent dynamic performances such as; high resistance to explosion and penetration. It has little effect on pre-cracking behavior in uniaxial compression, but substantially enhances its post cracking response. This response leads to a greatly improved ductility and toughness. Steel fibers in SFRC are capable of preventing crack propagation as well as brittle failure of columns under uniaxial compression. To this end, four reinforced …
Published in Journal of Construction Engineering, Technology & Management · Vol. 5, Issue 2, 2015 · pp. 9–14 Read article
-
Digital Twin Assisted Intelligent Prediction of Polymer Composite Degradation Under Environmental Exposure
Abstract: Polymer matrix composites (PMCs) deployed in aerospace, marine, automotive, and renewable-energy structures are continuously subjected to coupled environmental stressors — ultraviolet (UV) radiation, moisture ingress, thermal cycling, and mechanical loading — that progressively degrade their mechanical performance. Conventional accelerated ageing tests and empirical lifetime models are time-consuming, destructive, and poorly suited to in-service, asset-specific degradation forecasting. This paper proposes a Digital Twin (DT) assisted intelligent prediction framework that fuses a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Influence of wall friction on Active Earth Pressure in Model Test
Abstract: Earth pressure theories occupy a paramount position in the field of geotechnical engineering. The knowledge of active earth pressure under static condition is essential in designing a retaining wall as the damage to such retaining structures may lead to disastrous failure. A retaining wall helps in maintaining the ground surface at different elevations on either side of it. Without such a structure, the soil at higher elevation would tend to …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 1, 2021 · pp. 12–19 Read article
-
Experimentation design of various edible and non-edible oils-based biodiesel using response surface methodology
Abstract: The current research presents the experimentation design for three input process parameters for the optimization of biodiesel production. The response surface methodology using CCRD is applied through design expert 6.0.8 tool. The small factorial is applied to reduce the experiments to some extent. It has been observed that response surface methodology is the effective technique to design the experiments as compared to other statistical techniques. Furthermore this tool has been …
Published in Trends in Machine design · Vol. 10, Issue 1, 2023 · pp. 39–44 Read article
-
Electromagnetic and Dielectric Performance of Polymer–Ceramic Composite Substrates for Fractal-Based IoT-Antenna Fabrication
Abstract: Polymer–ceramic composite substrates play a crucial role in determining the electromagnetic performance, mechanical stability, and thermal reliability of radio-frequency devices. In this work, a polymer-based composite substrate is systematically investigated for its suitability in compact IoT and RFID antenna applications. A fractal-structured antenna is employed as a functional test platform to evaluate the dielectric behavior, impedance characteristics, and radiation efficiency of the composite substrate. Novelty of the proposed reader antenna …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1518–1534 Read article
-
Study on the Method of Prediction of Complete Inflation Time of Parachute
Abstract: In general, the parachute test is a long test period, expensive, and difficult to measure with accuracy, which makes it a very laborious and laborious task due to the strong nonlinearity of the fabric of the parachute. Therefore, attempts have been made to overcome this by using a parachute testbed or by simulation, but in our country, there is no numerical simulation of the parachute, and no research has been …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 25–31 Read article
-
Solving Problems Arising during the Monocrystals Growth in Microgravity Using Controlled Vibration
Abstract: Earlier studies of the vibration effect on a vessel with a fluid with gas bubbles dissolved in it permitted to establish the localization and stable position of the "swarm" of gas bubbles at a certain level of fluid in the vessel, corresponding to a certain frequency and vibration acceleration, as well as the volume of the "swarm" of gas bubbles. Controlling the "swarm" of gas bubbles in a fluid by …
Published in Research & Reviews : Journal of Space Science & Technology · Vol. 10, Issue 1, 2021 · pp. 25–40 Read article
-
Mechanical Characterization and Machinability Optimization of Stir-Cast Al6061–SiC Metal Matrix Composites
Abstract: This study presents the fabrication, mechanical characterization, metallurgical analysis, and machinability optimization of Aluminum 6061 reinforced with Silicon Carbide (SiC) metal matrix composites (MMCs) at three weight fractions: 5%, 7.5%, and 10%. Composites were manufactured using the stir casting technique, followed by comprehensive mechanical testing (tensile, hardness, and impact), optical microscopy, and scanning electron microscopy (SEM). Machinability was assessed through turning experiments on a lathe using an L9 Taguchi orthogonal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 833–848 Read article
-
Effects of Kangaroo Mother Care on the Physiological, Behavioral, and Psychosocial Outcomes of Preterm Infants in Various Hospitals in Karnataka
Abstract: Background: Kangaroo mother care (KMC) is a technique that encourages skin-to-skin contact, offering various physiological, behavioral, and psychosocial benefits for preterm infants. The objective is to assess the impact of KMC on the physiological, behavioral, and psychosocial development of premature babies. Study Design: This was a quasi-experimental research investigation. Materials and Methods: A purposive sample of sixty premature infants and their mothers was drawn from neonatal intensive care units (NICUs) …
Published in International Journal of Women's Health Nursing And Practices · Vol. 2, Issue 2, 2024 · pp. 10–19 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1258–1284 Read article
-
Optimum Mixture Proportioning of Sawdust Ash Blended Sand-Stone Dust Blocks Using Scheffe’s Regression Theory
Abstract: This study carried out an experimental investigation on the compressive strength of sawdust ash blended sand-stone dust block of size 450 x 225 x 150 mm using Scheffe’s (5, 2) regression theory. The compressive strength of sawdust ash blended sand-stone dust blocks obtained based on fifteen trial mix ratios were used to develop the mathematical model while the results of the compressive strength values obtained based on the additional fifteen …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 33–40 Read article
-
Study on the Profile and Flow Field Variation of Parachute Coating by Seven-hole Probe Method
Abstract: In general, the parachute test is a long test cycle, expensive, and difficult to measure with accuracy, which makes it a very laborious and time-consuming task. Therefore, attempts have been made to overcome this by using a parachute test stand or by simulation, but in our country, there is no numerical simulation of the parachute and there is no research on it. In this paper, the variation of the shape …
Published in Journal of Aerospace Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 26–37 Read article
-
Effect of Steel Slag and Bagasse Ash on Strength of Concrete
Abstract: An experimental investigation was carried out to evaluate the strength properties of concrete. The concrete mix of M-50 grade was designed and produced by replacing steel slag partially with fine aggregate and bagasse ash partially with cement. The mix proportions were prepared with varying percentage of bagasse ash including one control mix of steel slag. Bagasse ash in concrete was replaced with 0, to 20% with an interval of 5% …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 1, 2017 · pp. 1–10 Read article
-
Thermal Analysis of Kirloskar VCR Engines Using Blended Biodiesels under Varying Loads
Abstract: The increasing demand for sustainable energy has prompted much research into environment-friendly substitutes for traditional fossil fuels. In this study, the thermal performance and emission characteristics of Kirloskar Variable Compression Ratio (VCR) diesel engines evaluated with varying load conditions using biodiesel-sourced oil blended with soybean oil are discussed. B0 (pure diesel) to B100 (pure biodiesel) blends were considered for the study to assess their effects on parameters, like brake thermal …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 3, Issue 1, 2025 · pp. 19–34 Read article
-
Xypher Bot: Autonomous Surveying Robot
Abstract: Xypher Bot is a fully autonomous robot built to carry out tasks like height measurement, estimating distance, and detecting objects. It uses affordable and easily available components such as the MPU6050 sensor, ultrasonic sensors, and a laser pointer. By using simple trigonometry, the bot can measure object height with good accuracy. The top part of the bot, which is responsible for height measurement, has already been built and tested. The …
Published in International Journal of Advanced Robotics and Automation Technology · Vol. 3, Issue 2, 2025 · pp. 49–62 Read article
-
Utilization of Rice Husk Ash and Fly Ash in Construction Industry
Abstract: This experimental work is an effort to try to develop the awareness and importance of waste management and its utilization in productive manner among the people. In today’s more environmentally conscious world, a more responsible approach to the environment is to increase the use of by-products of one which is disposed off as waste as raw material for construction industry. Substitution of OPC cement by rice husk ash and fly …
Published in Recent Trends in Civil Engineering & Technology · Vol. 6, Issue 1, 2016 · pp. 13–28 Read article
-
Predicting Dielectric Constants of Polymers Using Molecular Structural Descriptors and Explainable Machine Learning: A Data-Driven Approach
Abstract: Accurate prediction of dielectric constants in polymeric materials is fundamental to the rational design of advanced electronic components, energy storage capacitors, flexible substrates, and high-frequency communication circuits. Conventional approaches to identifying suitable polymer dielectrics rely on extensive experimental synthesis and characterisation, which are both time-consuming and resource-intensive. In this work, an explainable machine learning framework is developed to predict the dielectric constant of polymers directly from molecular structural descriptors derived …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 297–304 Read article