Search
346 articles for “tensile properties”
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Development and Evaluation of Sodium Hydroxide-Treated Jujube Pit Reinforced Epoxy Composites
Abstract: The automotive sector has experienced a tremendous transformation, propelled by the increasing demand for materials that provide a balance between mechanical performance, economic efficiency, and environmental sustainability. In accordance with worldwide sustainability goals, the trend has moved toward the utilization of lightweight, recyclable, and biodegradable materials in modern vehicle architecture. Natural composite materials, which are derived from renewable resources such as seeds, leaves, and tree barks, have gained considerable attention …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 494–501 Read article
-
Experimental Investigation of Tensile Strength of Bamboo Fiber/Synthetic Glass Fiber
Abstract: In this work, hybrid fiber reinforced composites (HFRCs) with enhanced mechanical and physical characteristics are created by reinforcing composite laminates using a blend of natural bamboo fiber and synthetic glass fiber. The primary goal of the inquiry is to assess these composites' tensile and impact properties. In comparison to non-hybrid composites, the hybrid composite, which consists of two layers of bamboo fiber and one layer of bidirectional glass fiber, had …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1700–1710 Read article
-
Tensile and Microstructural Behaviour of Friction Stir Welded AL7050 Hybrid Composites Reinforced with Multani Mitti and Cow Dung Ash
Abstract: The study examines Al7050 aluminum alloy composites made by stir casting and bonded by friction stir welding (FSW), supplemented with environmentally friendly Multani Mitti (MM) and cow dung ash (CDA). The study assesses the effects of different hybrid reinforcement contents (0–8 vol%) on the microstructural properties, hardness, and tensile behavior of the base alloy and its FSW joints. Tensile testing reveals an initial decline at 2% reinforcement but a notable …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 78–89 Read article
-
Performance and Robustness of Wind Turbine Blades Composed of Recovered Waste Carpet Fiber Polymer Composites
Abstract: Carpets stay in good condition for ten to fifteen years, after which they wear out and are discarded. The large amount of used carpet waste is often dumped in landfills, causing health risks, air pollution, and other environmental problems. To reduce the growth of landfill sites, it is essential to implement recycling measures for carpet waste, protecting the environment by reusing these materials in new products. Carpet are made from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 53–66 Read article
-
Investigation on Mechanical Properties of Bamboo Fibre Reinforced Composites
Abstract: This study investigates the mechanical performance of bamboo fibre-reinforced polymer composites (BFRPCs), emphasizing tensile, flexural, and impact properties. The composites were fabricated using an epoxy resin matrix combined with untreated bamboo fibres in varying fibre contents ranging from 25% to 45%, utilizing the hand lay-up method. Among the tested compositions, the composite with 35% bamboo fibre content exhibited the most favorable mechanical characteristics. It achieved the highest tensile strength of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 325–338 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Effect of Barium Sulphate on Mechanical Properties of Woven Aloe Vera/Flax Reinforced Epoxy Composites
Abstract: Natural fiber-reinforced composites are becoming popular because of their lightweight, eco-friendly, and sustainable nature. Nevertheless, single-fiber composites tend to exhibit poor mechanical performance. This research paper has created a hybrid composite bonded with woven Aloe vera and flax reinforced with an epoxy bond. Barium sulphate (BaSO4) filler was added to further improve the properties. The fibers were subjected to sodium hydroxide (NaOH) to enhance bonding with the matrix and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 355–365 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Experimental Investigation of Hybrid Natural Fiber Reinforced Epoxy Composites Using Banana and Sugar Palm Fibers
Abstract: This paper is a research study that examines the mechanical and morphological properties of hybrid natural fiber reinforced epoxy composites manufactured from banana fibers (BF) and sugar palm fibers (SPF). Because the use of sustainable, lightweight, and cost effective materials in engineering continues to grow, many engineers are looking at the possibility of utilizing natural fiber reinforced polymer composites as alternatives to traditional man-made fiber composites. Hybrid composite laminate samples …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 195–205 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Water Absorption and Mechanical Behaviour of Bagasse Fibre and Particle-Reinforced Hybrid Composite Materials
Abstract: This study investigates the mechanical behaviour and water absorption characteristics of bagasse fibre and groundnut shell particle (GSP)-reinforced hybrid composites using a phenol-formaldehyde (PF) resin matrix. Varying weight fractions of GSP (5%, 10%, 15%, and 20%) were incorporated into the composites, with bagasse fibre content kept constant at 30% by weight. Tensile, flexural, and impact strengths were measured, and the water absorption behaviour was evaluated following ASTM standards.The results indicated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 115–124 Read article
-
Performance Evaluation of High-Performance Fiber Reinforced Concrete Incorporating Fly Ash, Coir Husk Ash, and Hybrid Fibers
Abstract: High-Performance Fiber-Reinforced Concrete (HPFRC) is an advanced composite material designed to improve the mechanical properties and durability of conventional concrete. This study investigates the effects of fly ash (FA), coir pith ash (CPA), and various fiber reinforcements (polypropylene, coir, and kenaf) on the compressive strength of HPFRC. The research evaluates the influence of natural admixtures, single fiber additions, and hybrid fiber combinations to optimize mix proportions for enhanced structural performance. …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 10–15 Read article
-
Eco-Friendly Tri-Layer Hybrid Composites: A Sustainable Approach to Polymer Matrix Materials
Abstract: In the current study, we explored the use of environmentally friendly natural fibers such as sisal, banana, and kevlar. These fibers were fabricated by hand lay-up technique, and their impact on tensile and dynamic properties was evaluated according to ASTM standards. The assessment was conducted under both dry and wet conditions, considering two different chemical dosage parameters for comparison. Additionally, the tri-layer fibers underwent two separate chemical treatments using 1% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 195–205 Read article
-
Future Fibers for the Airport Engineering
Abstract: This paper explores the use of advanced fibers in drone technology, with a specific focus on textiles for drone body structures. As drones continue to evolve, selecting materials that enhance performance, durability, and sustainability has become increasingly critical. Traditionally, drone components rely on resin-based composites for strength and rigidity. However, recent advancements demonstrate that certain fibers can achieve exceptional structural performance without the need for resin. The study emphasizes materials …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 14–18 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
New Design Formulae for Safety and Precision in the Fatigue Engineering of Mechanical Components and Structures
Abstract: This paper introduces two new formulae, termed the Nori Fatigue Formulae, for determining the maximum allowable fatigue stress in mechanical components and structures with significant stress concentrations. These formulae will eliminate the usage of code-sensitive safety factors along with other factored values from the entire mechanical design engineering work, ranging from a safety pin to spacecraft. The first formula gives the maximum allowable fatigue stress in tension, and the second …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 6–24 Read article
-
Investigating the Mechanical Properties and Microstructure of AA 7074 Composites with Silicon Nitride Reinforcement
Abstract: This study investigates the mechanical and microstructural properties of AA 7074 aluminium alloy reinforced with 1%, 3%, and 5% by weight of silicon nitride (Si₃N₄), fabricated via the stir casting method, intended for structural aerospace applications. A thorough series of mechanical tests—comprising tensile, compression, hardness, impact, flexural, and wear tests—was performed to assess the influence of differing reinforcing content. The composite containing 5 wt% Si₃N₄ (SN5) demonstrated the most pronounced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 268–281 Read article