Search
215 articles for “flexure”
-
Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review
Abstract: This paper provides a comprehensive review of fiber-reinforced composites, focusing specifically on the utilization of metal-fiber composites in aerospace such as metal surface preparation prior to bonding, resin selection, and detailed examination of mechanical testing and impact studies. The significance of metal surface preparation for establishing strong bonding, which is a crucial initial step in composite fabrication, is discussed. Additionally, the prevalent use of epoxy resins and their importance in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 96–108 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Physical and Mechanical Properties of GGBS Based Geopolymer Concrete with the Inclusion of Metakaolin
Abstract: The use of ecologically friendly materials in the production of concrete is a significant and pertinent development in the global movement for sustainable construction. Geopolymer concrete (GPC) has gained popularity as an alternative to conventional Portland cement (OPC)-based concrete due to its utilisation of ground granulated blast furnace slag (GGBS), fly ash, and metakaolin, among other industrial by-products. The production of geopolymer concrete addresses serious environmental problems and contributes to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 261–266 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Reviewing the Effect of Waste PET Strips as Fiber Reinforcement in Concrete
Abstract: Polyethylene Terephthalate also known as PET is the most commonly and widely used petroleum polymer plastic in the packaging industry. It is a well-established fact that the non-biodegradability of all plastics is a hazard to the environment. Thus, effective management of this waste is necessary. Numerous researchers have carried out studies and attempts to incorporate this plastic waste into concrete for performance enhancement. Considering the possible utilization of this waste …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 166–177 Read article
-
Development of Polymer–Micro-Aluminum Composites for Lightweight Engineering Applications
Abstract: This research focuses on the systematic development of polymer–micro aluminum composites, with polypropylene (PP) and epoxy selected as representative polymer matrices. Micro aluminum fillers in the range of 5–25 wt.% were incorporated through melt blending (PP) and casting (epoxy), and the resulting composites were evaluated in terms of mechanical performance, microstructural integrity, and crystalline characteristics. Tensile strength of the composites increased significantly, from 31 MPa in neat PP to 44 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1–12 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Sustainable High-Strength Concrete: A Study on M60 Mixes with Alccofine as Supplementary Cementitious Material
Abstract: Concrete, which combines cement, water, aggregates, and admixtures to create a flexible material that solidifies into stone-like strength, is the foundation of contemporary building. Because of its versatility, it can be used for anything from pavements to skyscrapers, but typical mixes require large amounts of cement, which increases manufacturing costs and CO2 emissions. This study investigates the use ofAlccofine 1203, a powder made from ultrafine slag, as a partial substitute …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 33–41 Read article
-
Marine Algal Fiber Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Layered Metal–Polymer Hybrid Laminates with Embedded Impact Sensors for Connected Automotive Panels
Abstract: The increasing demand for lightweight, intelligent, and structurally reliable automotive components has accelerated the development of multifunctional hybrid materials capable of simultaneously providing superior mechanical performance and real-time structural health monitoring. In this study, a novel layered metal-polymer hybrid laminate incorporating an embedded flexible impact sensor was developed for connected automotive panel applications. The laminate was fabricated using AA6061-T6 aluminum alloy face sheets and a thermoplastic polyurethane interlayer through hot-press …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Dynamic Analysis of Honeycomb Sandwich Laminated Composite Plate using ANSYS
Abstract: A structural sandwich is a peculiar form of a laminated composite comprising of a combination of distinct materials which are bonded together to use effectively the properties of each separate component to the structural advantage of the whole assembly. Two thin, rigid and quite strong faces in the framework are partitioned by a thick, light and weaker core. The faces are attached adhesively to the core to ensure effective load …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 2, 2026 Read article
-
Investigation of Mechanical Properties of Jute and Bamboo Natural Fiber Composites
Abstract: Natural fibers have become increasingly popular in recent decades. Natural fiber composites are also becoming increasingly popular in a various industries, including automobiles, furniture, packaging, construction and sports. Natural fibers have several advantages over synthetic fibers, including low cost, low density, reduced damage to processing equipment, good relative mechanical properties, renewability, and biodegradability. Natural fibers were also introduced with the goal of producing lighter composites, and they have shown a …
Published in Journal of Production Research & Management Read article
-
Experimental Study on Waste Fibers in Concrete
Abstract: The rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 190–201 Read article
-
Influence of Rice Husk Ash and Granite Powder on Strength Properties of Concrete
Abstract: Concrete is the mostly utilised material in the field of Civil Engineering. As its consumption is huge in amount and so the scarcity of the raw materials has become a major issue. The important components of concrete are binding material along with the aggregates. Alternative materials are chosen for the replacement of cement to achieve sustainable concrete. Along with cement replacing materials, reusable wastes are also adopted to utilise in …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 133–138 Read article
-
Investigating the Effect of Rubber as Partial Coarse Aggregate Replacement on Concrete Performance
Abstract: The growing challenge of managing scrap tire waste presents an opportunity for recycling these durable materials into concrete production. This research investigates the mechanical properties of concrete with waste tire rubber chips incorporated as a partial replacement for coarse aggregates at 0%, 5%, 10%, and 15% by volume. The study evaluates workability, compressive strength, and tensile strength, alongside durability assessments in a 5% sulphuric acid solution. Initial findings indicate that …
Published in Journal of Industrial Safety Engineering · Vol. 11, Issue 3, 2024 · pp. 11–17 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Comparative Analysis of Different Mechanical Properties of Banana Pseudostem Fiber and Pineapple Leaf Fiber Reinforced Polymer Composite
Abstract: In this research, a hybrid natural fiber polymer composite is prepared using different combinations of banana pseudostem fiber and pineapple leaf fiber in a discontinuous reinforcement phase and epoxy polymer in a continuous matrix phase. For the preparation of the composite, the hand layup technique is used and important mechanical characteristics, namely tensile, flexural, and impact strength, are determined. The findings of this investigation represent that the highest values of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1248–1256 Read article
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article