Search
83 articles for “Nanofluidics”
-
Experimental Analysis of Heat Transfer
Abstract: Experimental heat transfer and pressure drop characteristics of Al2O3/water nanofluid in a circular tube with meshes and without meshes is reported in this paper. The SEM image of Al2O3 nanoparticles in base fluid showed that the particles are uniformly dispersed in base fluid and tiny agglomeration of nanoparticles are present. The experiments were conducted under turbulent conditions with varying flow rates. It is observed the heat transfer rates increased by …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 16, Issue 1, 2014 Read article
-
Heat Transfer Augmentation in Twisted Rectangular Channel
Abstract: The best way to profoundly and scientifically concentrate the heat exchange upgrade of nanofluids under turbulent course through Twisted Rectangular channels under consistent heat flux conditions on every one of the walls is to look at the marvel numerically. The nanofluids are fundamentally the strong nanoparticle of CuO suspended in water arranged chemically. CFD investigation is led utilizing FLUENT programming by the limited volume technique. The limit conditions connected are …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 10, Issue 2, 2020 · pp. 8–17 Read article
-
INVESTIGATION OF THERMAL CONDUCTIVITY OF SILVER NANOPARTICLES IN BASEFULID OF WATER ETHYLENE GLYCOL
Abstract: Nanotechnology is interface technologies that span many different science and applications area.When engineering, science and technology are conducted at the nanoscale is called asnanotechnology. It is about 1 to 100 nm (nano-meter) where nano denotes the scale range of onebillionth of meter. Nanotechnology refers the properties of atoms and molecules measuring 0.1 to1000 nm. Nanofluids are nothing but suspension of nanometer sized particles in the base of fluid.The base fluid …
Published in Journal of Thermal Engineering and Applications · Vol. 7, Issue 3, 2020 · pp. 13–19 Read article
-
On Suitability of Supercritical Carbon Dioxide As Heat Transfer Fluid in Flat Plate Solar Collector
Abstract: In the present article, carbon dioxide is proposed as a heat transfer fluid for flat-plate solar thermal collector. Energetic, exergetic and economic analyses of flat plate collector using supercritical CO2 have been done and compared with conventional fluid (water) as well as advanced fluid (nanofluids). Effects of zonal ambient temperature and incident solar radiation on collector efficiency, irreversibility, second law efficiency and collector size reduction are presented. Due to lower …
Published in Journal of Thermal Engineering and Applications · Vol. 1, Issue 3, 2014 · pp. 33–41 Read article
-
Short Review on the Flow and Filtration of Polystyrene Microparticles in Micron-Scale Fluid Mechanics towards the Applications related to fluidic Microelectromechanical Systems
Abstract: Maskless lithography, hot embossing lithography and direct bonding technique are useful to fabricate the polymethylmethacrylate (PMMA) microfluidic devices. Also, maskless lithography and indirect bonding technique are useful to fabricate the SU-8 based glass microfluidic devices. In this work, a short review on microfluidic flow and microfluidic filtration of microparticles is provided by author related to the micron-scale fluid mechanics. This review may be useful to perform the blood filtration in …
Published in Journal of Microelectronics and Solid State Devices · pp. 36–41 Read article
-
Short Report to Describe the Surface-driven Microfluidic Flow in Fluid Mechanics
Abstract: In this short report, a brief review on surface-driven microfluidic flow is provided. Also, the maskless lithography and indirect bonding technique are used to fabricate a single SU-8 based glass microfluidic device. Dyed ethylene glycol is prepared as working liquid to test the fabricated device. The surface-driven microfluidic flow of dyed ethylene glycol is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of …
Published in Recent Trends in Fluid Mechanics · pp. 1–5 Read article
-
Double slope Solar Still by using Nano Embedded Binary Eutectic PCM: A Review
Abstract: Solar distillation is an economical and eco-friendly technique. Concerns about the increasing need for clean drinking water for home and commercial uses are spreading around the world. In rural and tiny settlements with limited access to water and electricity, solar water distillation is a viable method for removing salty water from drinking water. The efficiency and performance of thermal energy storage materials based on phase change materials (PCM) and nanofluids …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 29–33 Read article
-
Short Experimental Report on Lithographic Technique in Microfluidics
Abstract: In this experimental work, a single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique. The sealing by indirect bonding technique is perform during the hard baking in maskless lithography. Dyed ethylene glycol is prepared as the working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven microfluidic flow of …
Published in Journal of Microwave Engineering and Technologies · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
Flow and Filtration of Polystyrene Microparticles in Micron-Scale Fluid Mechanics towards the Applications related to fluidic Microelectromechanical Systems
Abstract: Maskless lithography, hot embossing lithography and direct bonding technique are useful to fabricate the polymethylmethacrylate (PMMA) microfluidic devices. Also, maskless lithography and indirect bonding technique are useful to fabricate the SU-8 based glass microfluidic devices. In this work, a short review on microfluidic flow and microfluidic filtration of microparticles is provided by author related to the micron-scale fluid mechanics. This review may be useful to perform the blood filtration in …
Published in Journal of Microelectronics and Solid State Devices · Vol. 8, Issue 3, 2021 · pp. 36–41 Read article
-
A Review of Experimental and Numerical Investigation on the Heat Transfer in Micro-Channel Heat Exchanger for Various Nano Fluids
Abstract: AbstractA tremendous amount of work has been carried out on micro and nanoscale heat exchanger. Cooling requirement is increasing day by day in field of, high performance Aircraft gas turbine engines, Heat pumps, Air conditioning, Heat recovery ventilators, Integrated circuits (IC), VLSI devices, Computer chips, Printed circuit boards and biomedical applications etc. Many investigators focused on parameters such as Reynolds number, cross cut length, pressure drop, particle concentration of Nano …
Published in Recent Trends in Fluid Mechanics · Vol. 5, Issue 3, 2018 · pp. 1–7 Read article
-
Surface-Driven Microfluidic Flow in Fluid Mechanics
Abstract: In this short report, a brief review on surface-driven microfluidic flow is provided. Also, the maskless lithography and indirect bonding technique are used to fabricate a single SU-8 based glass microfluidic device. Dyed ethylene glycol is prepared as working liquid to test the fabricated device. The surface-driven microfluidic flow of dyed ethylene glycol is recorded by a CMOS camera catching 25 frames per second with a corresponding time-scale resolution of …
Published in Recent Trends in Fluid Mechanics · Vol. 8, Issue 3, 2021 · pp. 1–5 Read article
-
Double slope Solar Still by using Nano Embedded Binary Eutectic PCM: A Review
Abstract: Solar distillation is an economical and eco-friendly technique. Concerns about the increasing need for clean drinking water for home and commercial uses are spreading around the world. In rural and tiny settlements with limited access to water and electricity, solar water distillation is a viable method for removing salty water from drinking water. The efficiency and performance of thermal energy storage materials based on phase change materials (PCM) and nanofluids …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 22–33 Read article
-
Cu-H2O Nano-Fluid Effect on Buoyancy Driven Flow in 2D Enclosure
Abstract: System miniaturization resulting in exponential increase of the heat in electronic devices, to serve this purpose we need some adequate quality heat cooling devices and materials, due to the limitation of conventional cooling process. Suspension of nano-particles in the base fluid called nano-fluid, shows prominent increase in the heat transfer and can be one of appropriate option which can be answer to this problem. Present work deals with numerical simulation …
Published in Journal of Thermal Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 1–7 Read article
-
PERFORMANCE STUDY FOR ACTIVE SOLAR STILLS BASED ON ENERGY METRICS: A SHORT REVIEW
Abstract: id of corresponding author: agashok26@gmail.comABSTRACTWe have superfluous amount of solar radiation available on the Earth which we can use for various purposes like conventional and non conventional uses. Among all application and utilization of solar energy, the basic utilization of solar energy is to produce neat potable water with the help of solar distillation method. This is because water is one of the prime elements for the survival on the …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 4, Issue 3, 2017 · pp. 21–26 Read article
-
A Comprehensive Study of ZnxFe2-xO3 Nanoparticles: Assessing Magnetic Properties for Medical Imaging (MI)
Abstract: Diluted magnetic ZnxFe2-xO3 nanoparticles are special semiconducting nanoparticles which are recognized for their magnetic properties. A theoretical examination of Zn-doped αFe2O3 nanostructures reveals a range of structural and property variations, offering insights into their potential applications and behavior at the nanoscale. In this regard, Heisenberg’s model and Weiss molecular filed theory is used to describe the magnetic properties of ZnxFe2-xO3 nanoparticles. These theorems inevitably enable to investigate the relationship between …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 2, 2024 · pp. 18–25 Read article
-
Low-Grade Heat Recovery: Emerging Materials and Systems for Efficient Utilization
Abstract: Low-grade heat (LGH), generally characterized by temperatures below 200°C, constitutes a significant portion of wasted thermal energy in industrial, commercial, and even residential processes. Despite its vast availability, the efficient recovery and utilization of LGH remains underdeveloped due to its inherently low exergy content and the limitations of traditional heat recovery technologies. The creation of cutting-edge materials and creative system-level approaches for LGH recovery has accelerated significantly as companies continue …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 1, 2025 · pp. 24–29 Read article
-
Solar Thermal Energy Utilization: Design Innovations and Performance Enhancement Techniques
Abstract: The utilization of solar thermal energy has become increasingly significant in the pursuit of sustainable and low-carbon energy solutions. Unlike photovoltaic technologies that directly convert sunlight into electricity, solar thermal systems focus on harnessing solar radiation to generate heat, which can then be applied to diverse sectors such as water heating, space conditioning, industrial process heating, and power generation. In recent years, substantial research efforts have been directed toward enhancing …
Published in International Journal of Energy and Thermal Applications · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Enhancing Heat Transfer in Exchangers: Nanoparticle-enhanced Fluids for Improved Thermal Performance
Abstract: This research investigates the utilization of nanoparticle-enhanced fluids to improve the thermal performance of heat exchangers. Heat exchangers play a pivotal role in numerous industrial applications and energy systems, necessitating continuous efforts to enhance their efficiency. Nanotechnology has recently emerged as a promising avenue for achieving this goal. The study begins with a comprehensive review of existing literature, highlighting the significance of heat exchangers and the potential benefits of incorporating …
Published in Journal of Thermal Engineering and Applications · Vol. 10, Issue 2, 2023 · pp. 23–30 Read article
-
Short Report on the Microfluidic Flow of Dyed Ethylene Glycol
Abstract: In this experimental work, a single polymethylmethacrylate (PMMA) microfluidic device as gradual expansion microchannel is fabricated by maskless lithography, hot embossing lithography and direct bonding technique. Dyed ethylene glycol is prepared and used as working liquid in this work. A CMOS camera is used to capture the passive microfluidic flow of dyed ethylene glycol in the fabricated microfluidic device. Nano fluidics is the nano-scale fluid mechanics in nanotechnology. In future, …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 2, 2021 · pp. 10–13 Read article
-
The Effect of CNT Coating on Convective Heat Transfer Coefficient, Heat Flux, Roughness, Pressure Drop of Porous Material with 3-Omega Technique: A Review
Abstract: The paper deals with the tentative survey on the heat transfer and pressure drop characteristics of CNT glaze on a stainless steel substrate in a rectangular comprehensive channel with water as the working fluid. The extremely high thermal conductivity of individual carbon nanotubes was predicted hypothetically and pragmatic experimentally. Under both, laminar and turbulent flow conditions, the experiments were conducted with Reynolds number unpredictable from 500–2600. A nanofluid, which depends …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 18, Issue 3, 2016 · pp. 5–8 Read article